User`s guide
Table Of Contents
- USER’S GUIDE MFC-5890CN MFC-6490CW
- Approval Information and Compilation and Publication Notice
- Table of Contents
- Section I: General
- 1 General Information
- 2 Loading paper and documents
- 3 General setup
- 4 Security features
- Section II: Fax
- 5 Sending a Fax
- Entering Fax mode
- Broadcasting (Monochrome only)
- Additional sending operations
- Sending faxes using multiple settings
- Contrast
- Changing fax resolution
- Dual access (Monochrome only)
- Real time transmission
- Overseas Mode
- Delayed Faxing (Monochrome only)
- Delayed Batch Transmission (Monochrome only)
- Checking and cancelling waiting jobs
- Setting your changes as a new default
- Restoring all settings to the factory settings
- Sending a fax manually
- Out of Memory message
- 6 Receiving a Fax
- 7 Telephone and External devices
- Voice operations
- Telephone Service for Australia
- Telephone Service for New Zealand
- Telephone Service for Some Countries
- Connecting an external TAD (telephone answering device)
- External and extension telephones
- 8 Dialling and storing numbers
- 9 Printing Reports
- 10 Polling
- 5 Sending a Fax
- Section III: Copy
- 11 Making copies
- How to copy
- Copy settings
- Changing copy speed and quality
- Enlarging or reducing the image copied
- Making N in 1 copies or a poster (Page Layout)
- Sorting copies using the ADF
- Adjusting Brightness and Contrast
- Paper Options
- Skew Adjustment (MFC-6490CW only)
- Book Copy
- Watermark Copy
- Setting your changes as a new default
- Restoring all settings to the factory settings
- ‘Out of Memory’ message
- 11 Making copies
- Section IV: Direct Photo Printing
- Section V: Software
- Section VI: Appendixes
- A Safety and Legal
- B Troubleshooting and Routine Maintenance
- C Menu and Features
- D Specifications
- E Glossary
- Index
- brother ARL/ASA/NZ
General setup
27
3
Paper Size 3
You can use seven sizes of paper for printing
copies: A4, A5, A3, 10 × 15 cm (4 × 6in.),
Letter, Legal and Ledger and five sizes for
printing faxes: Ledger, Letter, Legal, A3 and
A4. When you change the size of paper you
load in the machine, you will need to change
the paper size setting at the same time so
your machine can fit an incoming fax on the
page.
a Press Menu.
b Press a or b to choose
General Setup.
Press OK.
c Press a or b to choose Paper Size.
d
Press
d
or
c
to choose
A4
,
A5
,
A3
,
10x15cm
,
Letter
,
Legal
, and
Ledger
.
Press OK.
e Press Stop/Exit.
Paper Size and Type
(MFC-6490CW only) 3
To get the best print quality, set the machine
for the type of paper you are using.
You can use seven sizes of paper for printing
copies: A3, A4, A5, 10 × 15 cm (4 × 6in.),
Ledger, Letter and Legal and five sizes for
printing faxes: A3, A4, Ledger, Letter and
Legal. When you load a different size of paper
in the machine, you will need to change the
paper size setting at the same time so your
machine can fit an incoming fax on the page.
a Press Menu.
b Press a or b to chose General Setup.
Press OK.
c Press a or b to chose Tray Setting.
Press OK.
d Press a or b to choose Tray#1 or
Tray#2.
Press OK.
e Do one of the following:
If you chose Tray#1, press d or c to
choose Plain Paper,
Inkjet Paper, Brother BP71,
Other Glossy or
Transparency.
Press OK.
Press a or b to choose Paper Size
and press d or c to choose A4, A5,
A3, 10x15cm, Letter, Legal or
Ledger.
Press OK.
If you chose Tray#2, press a or b to
choose Paper Size and press
d or c to choose A4, A3, Letter,
Legal or Ledger.
Press OK.
f Press Stop/Exit.
Note
• You can only use plain paper and paper
sizes A3, A4, Ledger, Letter or Legal in
Tray #2.
• The machine ejects paper with printed
surfaces face up onto the paper tray in
front of the machine. When you use
transparencies or glossy paper, remove
each sheet at once to prevent smudging
or paper jams.