Operation Manual

General information
19
1
2.Fax 1
2.Fax (For MFC-1900(E) and MFC-1905)
Level 2 Level 3 Descriptions 1 Options Descriptions 2 Page
1.Setup
Receive
(In FAX mode
only)
1.Ring Delay The Ring Delay
setting sets the
number of times the
machine rings before
it answers in Fax
Only and Fax/Tel
modes.
(00 - 08)
02*
(Example for the
U.K.)
If you have external
or extension
telephones on the
same line as the
machine, choose the
maximum number of
rings.
60
2.F/T Ring
Time
Sets the length of the
fast double-ring time
in Fax/Tel mode.
20 Secs
30 Secs*
40 Secs
70 Secs
If the call is a fax,
then your machine
will receive it;
however, if it is a
voice call the
machine will sound
the F/T ring (a fast
double-ring) for the
time you have set in
the F/T Ring Time
setting. If you hear
the F/T ring it means
that you have a voice
caller on the line.
60
3.Fax
Detect
1
Receives fax
messages without
pressing Start. When
Fax Detect is On, you
can receive fax
messages without
pressing Start.
On* The machine can
receive a fax
automatically, even if
you answer the call.
60
Semi (MFC
-1905)
The machine will only
receive a fax call
automatically if you
answered it using the
machine's handset.
Off If you are at the
machine and answer
a fax call first by lifting
the handset of an
external telephone
(MFC
-1900(E) only)
or the machine
(MFC
-1905 only),
press Start.
The factory settings are shown in Bold with an asterisk.