User Manual

USB cable scanning
168
12
e (For 1 line LCD models) Press a or b to choose the quality you want.
Press OK.
(For Colour LCD models) Press a or b to choose Quality.
Press d or c to choose the quality you want.
Press OK.
Do one of the following:
 If you want to change the file type, go to step f.
 Press Mono Start or Colour Start to start scanning without changing additional settings. Go to
step h.
f (For 1 line LCD models) Press a or b to choose the file type you want.
Press OK.
(For Colour LCD models) Press a or b to choose File Type.
Press d or c to choose the file type you want.
Press OK.
Do one of the following:
 If you want to change the file name, go to step g.
 Press Mono Start or Colour Start to start scanning without changing additional settings. Go to
step h.
Note
• If you choose colour in the quality setting, you cannot choose TIFF.
• If you choose monochrome in the quality setting, you cannot choose JPEG.
g The file name is set automatically. However, you can set a name of your choice using the dial pad. You
can only change the first 6 digits of the file name. (MFC models only)
(For Colour LCD models)
Press a or b to choose File Name.
Press OK.
Note
Press Clear/Back to delete the letters you entered.
Do one of the following:
 If you want to use Auto Crop feature, go to step i (Available on DCP-395CN, MFC-495CW,
DCP-593CW, DCP-595CW and DCP-597CW).
 Press Mono Start or Colour Start to start scanning without changing additional settings. Go to
step h.
h If you are using the scanner glass, the LCD displays Next Page?. After you finish scanning, make sure
you choose No before removing the memory card or USB Flash memory drive from the machine.
i Press a or b to choose Auto Crop.
Press OK.
j Press d or c to choose On.
Press OK.