Quick Start Manual

Installing the Driver & Software

Macintosh

USB

For USB Interface Cable Users

For Mac OS

X 10.2.4 or greater

Important

Make sure that you have finished the

instructions from step 1 Setting Up the

Machine on pages 4 through 7.

Note

For Mac OS

X 10.2.0 to 10.2.3 users, upgrade to

Mac OS

X 10.2.4 or greater. (For the latest

information for Mac OS

X, visit

http://solutions.brother.com

1 Plug the AC power cord into an AC outlet. Turn

the power switch on.

2 Connect the USB interface cable to your

computer, and then connect it to the machine.

Improper Setup

DO NOT connect the machine to a USB port on

a keyboard or a non-powered USB hub.

Brother recommends that you connect the

machine directly to your computer.

3 Turn on your Macintosh

4 Put the supplied CD-ROM into your CD-ROM

drive.

5 Double-click the Start Here OSX icon to install.

Follow the on-screen instructions.

Note

Please wait, it will take a few seconds for the

software to install. After the installation, click

Restart to finish installing the software.

6 The Brother software will search for the Brother

device. During this time the following screen

will appear.

7 When this screen appears, click OK.

For Mac OS

X 10.3.x or greater users:

The MFL-Pro Suite, Brother printer driver,

scanner driver and Brother

ControlCenter2 have been installed and

the installation is now complete.

Go to step 12.