User`s guide

Chapter 2
16
 Documents must be from 148 to
215.9 mm wide and from 148 to 355.6 mm
long, and of a standard weight 80 g/m
2
.
a Fold out the ADF document output
support flap (1) and the ADF support
flap (2).
b Fan the pages well.
c Place your document, face up top edge
first, in the ADF until you feel it touch the
feed roller.
d Adjust the paper guides (1) to fit the
width of your document.
Using the scanner glass 2
You can use the scanner glass to copy or
scan pages of a book or one page at a time.
Documents can be up to 215.9 mm wide and
297 mm long.
Note
(DCP-7040 and DCP-7045N) To use the
scanner glass, the ADF must be empty.
a Lift the document cover.
b Using the document guidelines on the
left, centre the document face down on
the scanner glass.
c Close the document cover.
CAUTION
If the document is a book or is thick do not
slam the cover or press on it.
2
1
1