User Manual

ManualsBrandsBrother ManualsAll in One PrinterDCP-7060D

Table Of Contents

Quick Setup Guide DCP-7055 / DCP-7060D / DCP-7065DN

Start Here

DCP-7055 / DCP-7060D

DCP-7065DN

Quick Setup Guide

ARL/ASA/NZ/SAF/GLF Version 0

Please read the Safety and Legal booklet first before you set up your machine. Then, please read this Quick Setup

Guide for the correct setup and installation.

To view the Quick Setup Guide in other languages, please visit http://solutions.brother.com/

Unpack the machine and check the components

 This machine must be grounded, If in doubt, call a qualified electrician.

 To ensure safe operation the supplied plug must be inserted only into a standard power outlet that is

properly grounded through the standard electrical wiring. Non grounded equipment may cause an

electrical shock hazard, and may cause excessive electrical noise radiation.

Note

Not all models are available in all countries.

WARNING

indicates a potentially hazardous situation which, if not avoided,

could result in death or serious injuries.

CAUTION

indicates a potentially hazardous situation which, if not avoided, may

result in minor or moderate injuries.

Quick Setup Guide Basic User’s Guide Safety and Legal booklet

Drum Unit and Toner

Cartridge Assembly

(pre-installed)

Installation CD-ROM,

Documentation CD-ROM

AC Power Cord USB Interface Cable

(not available in Australia

and New Zealand)

For Australia and

New Zealand:

For Hong Kong, Malaysia

and Singapore:

For India:

The mains plug supplied with this machine is

a grounded three pin plug. Make sure that

the AC socket will accept the supplied

grounded pin plug.

For Philippines

and Thailand:

The mains plug supplied with this machine is a side grounded two pin plug. Make sure that

the AC socket will accept the supplied grounded pin plug.

WARNING

CAUTION

Summary of content (19 pages)

PAGE 1
Quick Setup Guide Start Here DCP-7055 / DCP-7060D DCP-7065DN Please read the Safety and Legal booklet first before you set up your machine. Then, please read this Quick Setup Guide for the correct setup and installation. To view the Quick Setup Guide in other languages, please visit http://solutions.brother.com/. Note Not all models are available in all countries. WARNING WARNING indicates a potentially hazardous situation which, if not avoided, could result in death or serious injuries.
PAGE 2
WARNING Plastic bags are used in the packaging of your machine. Plastic bags are not toys. To avoid danger of suffocation, please keep these bags away from babies and children and dispose of them correctly. CAUTION CAUTION When you move the machine, grasp the side handholds that are under the scanner. DO NOT carry the machine by holding it at the bottom. Note • Keep a minimum gap around the machine as shown in the illustration.
PAGE 3
2 Remove the packing material from the machine d Lift the elastic band off the drum. IMPORTANT DO NOT connect the AC power cord yet. a b Remove the packing tape from the outside of the machine and the film covering the scanner glass. Open the front cover. e c Pull the paper strip to remove the protective material as shown in the illustration. Remove the Silica Pack from the inside of the machine. f Take out the drum unit and toner cartridge assembly. CAUTION CAUTION DO NOT eat the Silica Pack.
PAGE 4
g Gently shake it from side to side several times to distribute the toner evenly inside the assembly. a h Pull the paper tray completely out of the machine. Put the drum unit and toner cartridge assembly back in the machine. b i 3 Load paper in the paper tray While pressing the green paper-guide release lever a, slide the paper guides to fit the paper size you are loading in the tray. Make sure that the guides are firmly in the slots. Close the front cover of the machine.
PAGE 5
c 4 Fan the stack of paper well to avoid paper jams and misfeeds. Connect the power cord IMPORTANT DO NOT connect the interface cable yet. d Put paper in the tray and make sure:  The paper is below the maximum paper mark (b b b) a. Over filling the paper tray will cause paper jams.  The side to be printed on must be face down.  The paper guides touch the sides of the paper so it will feed correctly. a b Connect the AC power cord to the machine, and then plug it into an electrical socket.
PAGE 6
Choose your language (Middle East and Africa only) 5 a After turning the power switch on, the LCD shows: c Press OK. Press a or b to choose your language and press OK. c Select Language English d Press Menu. Press a or b to choose 1.General Setup. Press OK. Press a or b to choose 3.LCD Contrast. Press OK. Press a to increase the contrast. —OR— If the LCD shows the correct language, press a. Press b to decrease the contrast. —OR— Press OK.
PAGE 7
Choose your connection type These installation instructions are for Windows® 2000 Professional, Windows® XP Home/Windows® XP Professional, Windows® XP Professional x64 Edition, Windows Vista®, Windows® 7, and Mac OS X (versions 10.4.11, 10.5.x and 10.6.x). Note For Windows Server® 2003/2003 x64 Edition/2008/2008 R2, visit your model page at http://solutions.brother.com/.
PAGE 8
USB Windows® For USB Interface Users (Windows® 2000 Professional/XP/XP Professional x64 Edition/Windows Vista®/Windows® 7) a 8 Before you install Make sure that your computer is ON and you are logged on with Administrator rights. a IMPORTANT • If there are any programs running, close them. • The screens may differ depending on your operating system. Note The installation CD-ROM includes ScanSoft™ PaperPort™ 12SE.
PAGE 9
USB e Windows® Connect the USB cable to the USB connector marked with the symbol on your machine and then connect the cable to your computer. f Turn the machine on, and follow the on-screen instructions to complete setup. DO NOT cancel any of the screens during the installation. It may take a few seconds for all screens to appear. • For Windows Vista® and Windows® 7 users, when the Windows Security screen appears, select the check box and click Install to complete the installation correctly.
PAGE 10
USB Macintosh For USB Interface Users (Mac OS X 10.4.11 - 10.6.x) a 8 Before you install Make sure your machine is connected to the power and your Macintosh is ON. You must be logged on with Administrator rights. IMPORTANT a b 9 Install MFL-Pro Suite Put the installation CD-ROM into your CD-ROM drive. Double-click the Start Here OSX icon. Follow the on-screen instructions. For Mac OS X 10.4.10 users, upgrade to Mac OS X 10.4.11 - 10.6.x.
PAGE 11
USB 10 Macintosh Download and install Presto! PageManager When Presto! PageManager is installed OCR capability is added to Brother ControlCenter2. You can easily scan, share and organize photos and documents using Presto! PageManager. On the Brother Support screen, click Presto! PageManager and follow the on-screen instructions. Macintosh 11 Windows® The installation is now complete.
PAGE 12
Wired Network Windows® For Wired Network Interface Users (DCP-7065DN only) (Windows® 2000 Professional/XP/XP Professional x64 Edition/Windows Vista®/Windows® 7) a 8 Before you install c Connect the network interface cable to the LAN connector and then connect it to a free port on your hub. Make sure that your computer is ON and you are logged on with Administrator rights. IMPORTANT • If there are any programs running, close them. • The screens may differ depending on your operating system.
PAGE 13
Wired Network d When the Firewall/AntiVirus detected screen appears, choose Change the Firewall port settings to enable network connection and continue with the installation. (Recommended) and click Next. (Not for Windows® 2000 users) Windows® 10 Install MFL-Pro Suite on additional computers (if needed) If you want to use your machine with multiple computers on the network, install MFL-Pro Suite on each computer. Go to step 9 on page 12.
PAGE 14
Wired Network Macintosh For Wired Network Interface Users (DCP-7065DN only) (Mac OS X 10.4.11 - 10.6.x) a 8 Before you install Make sure your machine is connected to the power and your Macintosh is ON. You must be logged on with Administrator rights. IMPORTANT a b 9 Install MFL-Pro Suite Put the installation CD-ROM into your CD-ROM drive. Double-click the Start Here OSX icon. Follow the on-screen instructions. For Mac OS X 10.4.10 users, upgrade to Mac OS X 10.4.11 - 10.6.x.
PAGE 15
Wired Network Note • You can find your machine’s MAC Address (Ethernet Address) and IP Address by printing out the Network Configuration Report. See Print the Network Configuration Report on page 16. • If this screen appears click OK. Enter a name for your Macintosh in Display Name up to 15 characters long and click OK. Go to d. • If you want to use the machine’s SCAN key to scan over the network, you must check the Register your computer with the "Scan To" function on the machine box.
PAGE 16
For Network Users (DCP-7065DN only) Web Based Management (web browser) Print the Network Configuration Report The Brother print server is equipped with a web server that allows you to monitor its status or change some of its configuration settings, using HTTP (Hyper Text Transfer Protocol). You can print the Network Configuration Report to confirm the current network settings. Note • The default User Name is ‘admin’ and the default password is ‘access’. You can use a web browser to change this password.
PAGE 17
Other Information Brother CreativeCenter Get inspired. If you're using Windows, double-click the Brother CreativeCenter icon on your desktop to access our FREE web site with many ideas and resources for personal and professional use. Mac users can access Brother CreativeCenter at this web address: http://www.brother.
PAGE 18
Consumables Consumables When the time comes to replace consumable items, an error will be indicated by the LCD on the control panel. For more information about the consumables for your machine, visit us at http://solutions.brother.com/ or contact your local Brother reseller.
PAGE 19
Trademarks The Brother logo is a registered trademark of Brother Industries, Ltd. Brother is a registered trademark of Brother Industries, Ltd. Microsoft, Windows, Windows Server and Internet Explorer are registered trademarks of Microsoft Corporation in the United States and/or other countries. Windows Vista is either a registered trademark or a trademark of Microsoft Corporation in the United States and other countries. Apple, Macintosh, Safari and TrueType are trademarks of Apple Inc.