Network User's Guide
Table Of Contents
- Network User’s Guide
- Introduction
- IMPORTANT INFORMATION: REGULATIONS
- Table of Contents
- 1 Unix Printing
- 2 TCP/IP Printing
- Printing from Windows NT® 4.0, Windows® 2000/XP, LAN Server and Warp Server
- Overview
- Windows NT® 4.0 and Windows® 2000/XP (TCP/IP) Configuration
- Windows® 2000/XP Printing (Printer Driver not yet installed)
- Windows® 2000/XP Printing (Printer Driver already installed)
- Windows NT® 4.0 Printing
- Windows NT® 4.0 Printing Installing the Brother Peer to Peer Software
- Windows NT® 4.0 Printing Associating to the Printer
- Windows NT® 4.0 Printing Adding a Second Brother LPR Port
- Other Sources of Information
- Printing from Windows NT® 4.0, Windows® 2000/XP, LAN Server and Warp Server
- 3 Peer to Peer Printing
- 4 NetBIOS Peer to Peer Printing
- How to Print Using NetBIOS in Windows® 95/98/Me/2000/XP, Windows NT® 4.0, LAN Server and OS/2 Warp Server
- 5 Configuring Internet Printing for Windows®
- Internet Printing Installation
- Overview
- Brother Internet Print General Information
- Brother Internet Print: Configuring the Brother Print/Fax Server
- Brother Internet Print: Using BRAdmin Professional utility to Configure the Print Server
- Brother Internet Print: Using a Web Browser to Configure the Print Server
- Brother Internet Print: Installing the BIP software on Windows® 95/98/Me/2000/XP and Windows NT® 4.0
- Adding a Second Brother Internet Port
- Windows® 2000/XP IPP Printing
- Specifying a Different URL
- Other Sources of Information
- Internet Printing Installation
- 6 Novell NetWare Printing
- How to Configure Novell NetWare Printing
- Overview
- General Information
- Creating a NDPS Printer Using NWADMIN for NetWare5
- NDPS Manager
- NDPS Broker
- Creating a Printer Agent
- Configuring NetWare 3 and NetWare 4 systems
- Creating a Network Print Server (Bindery Queue Server) using BRAdmin Professional utility
- Creating a Network Print Server (NDS Queue Server) using BRAdmin Professional utility
- Creating a Network Print Server (NDS Queue Server) using Novell NWADMIN and BRAdmin Professional utility
- Creating a Network Print Server (NDS Remote Printer) using Novell NWAdmin and BRAdmin Professional utility
- Other Sources of Information
- How to Configure Novell NetWare Printing
- 7 Printing from a Macintosh®
- Printing from a Macintosh® Using AppleTalk® and TCP/IP or Simple Network Configuration capabilities
- Overview
- Macintosh® Configuration (Mac OS® 8.6 - 9.2)
- How to Select the Print Server (AppleTalk/EtherTalk)
- How to Select the Print Server (TCP/IP)
- Macintosh Configuration (Mac OS® X 10.1-10.2.1 or greater)
- How to Select the Print Server (AppleTalk/EtherTalk)
- How to Select the Print Server (TCP/IP)
- Changing the Configuration
- Other Sources of Information
- Printing from a Macintosh® using Simple Network Configuration capabilities of Mac OS® X
- Printing from a Macintosh® Using AppleTalk® and TCP/IP or Simple Network Configuration capabilities
- 8 DLC Printing
- 9 Web Based Management
- 10 Front Panel Setup Menu
- 11 TCP/IP Configuration
- Assigning TCP/IP Information
- Overview
- Using the machine control panel to allocate an IP address (Models with LCD panels only)
- Changing the IP Address using the BRAdmin Professional utility
- Using BRAdmin Professional utility and the IPX/ SPX Protocol to set the IP address
- Using BRAdmin Professional utility and the TCP/ IP Protocol to set the IP address
- Using DHCP to Configure the IP address
- Using APIPA to Configure the IP Address
- Using ARP to Configure the Print/Fax Server IP Address
- Using RARP to Configure the IP Address
- Using BOOTP to Configure the IP Address
- Assigning TCP/IP Information
- 12 Internet FAX (MFC Only)
- 13 Troubleshooting
- Overview
- Installation problems
- Resetting the Print/Fax Sever back to factory settings (Test Switch)
- Intermittent Problems
- TCP/IP Troubleshooting
- UNIX Troubleshooting
- Windows NT® 4.0/LAN Server (TCP/IP) Troubleshooting
- Windows® 95/98/Me Peer to Peer Print (LPR) Troubleshooting
- Windows® 95/98/Me Peer-to-Peer (HP JetAdmin compatible method) Troubleshooting
- Windows® 95/98/Me/2000/XP and Windows NT® 4.0 Peer-to-Peer Print (NetBIOS) Troubleshooting
- Brother Internet Print (TCP/IP) Troubleshooting
- Windows® 95/98/Me/2000/XP IPP Troubleshooting
- Novell NetWare Troubleshooting
- AppleTalk Troubleshooting
- DLC/LLC Troubleshooting
- Web Browser Troubleshooting (TCP/IP)
- Internet Fax Troubleshooting
- 14 Brother Internet Fax Printing Software
- Appendix
- INDEX
13 - 11 TROUBLESHOOTING
1
If you changed the login password, you must change the
password in both the Brother Print/Fax server (using the
SET NETWARE PASSWORD
command if you are using the
BRConfig software or by using a web browser or the BRAdmin
Professional utility) and in the file server (using the PCONSOLE
Print Server Information Change Password
command).
2
If you created the print queue using PCONSOLE and BRConfig
instead of BRAdmin Professional utility, make sure that you
have enabled at least one NetWare file server using the
SET NETWARE SERVER servername ENABLED
command.
3
Have you exceeded your NetWare user limit?
4
Make sure that the Print server name you used in PCONSOLE
exactly matches the name that is configured in the Print/Fax
server, and make sure it is defined as a Queue Server for the
print queue.
5
If you are running both 802.3 and Ethernet II frames on different
file servers on your network, there is a possibility that the Print/
Fax server may not make a connection to the desired file server.
Try forcing the frame type to the desired one using the
SET NETWARE FRAME
command from the Print/Fax server
remote console or using BRAdmin Professional utility.
6
If you are using DOS CAPTURE statement and losing portions
of your print job, try setting the TIMEOUT parameter in your
CAPTURE statement to a higher value (at least 50 seconds for
Windows
®
).
AppleTalk Troubleshooting
In case of using Postscript driver, if you cannot print from an
AppleTalk for Macintosh computer and you have checked the
hardware and network as described in the previous steps, then
check the following:
1
Make sure that you are running Phase 2 AppleTalk and that you
have selected the correct network interface from the AppleTalk
Control Panel on the Macintosh.