Network User's Guide
Table Of Contents
- Network User’s Guide
- Introduction
- IMPORTANT INFORMATION: REGULATIONS
- Table of Contents
- 1 Unix Printing
- 2 TCP/IP Printing
- Printing from Windows NT® 4.0, Windows® 2000/XP, LAN Server and Warp Server
- Overview
- Windows NT® 4.0 and Windows® 2000/XP (TCP/IP) Configuration
- Windows® 2000/XP Printing (Printer Driver not yet installed)
- Windows® 2000/XP Printing (Printer Driver already installed)
- Windows NT® 4.0 Printing
- Windows NT® 4.0 Printing Installing the Brother Peer to Peer Software
- Windows NT® 4.0 Printing Associating to the Printer
- Windows NT® 4.0 Printing Adding a Second Brother LPR Port
- Other Sources of Information
- Printing from Windows NT® 4.0, Windows® 2000/XP, LAN Server and Warp Server
- 3 Peer to Peer Printing
- 4 NetBIOS Peer to Peer Printing
- How to Print Using NetBIOS in Windows® 95/98/Me/2000/XP, Windows NT® 4.0, LAN Server and OS/2 Warp Server
- 5 Configuring Internet Printing for Windows®
- Internet Printing Installation
- Overview
- Brother Internet Print General Information
- Brother Internet Print: Configuring the Brother Print/Fax Server
- Brother Internet Print: Using BRAdmin Professional utility to Configure the Print Server
- Brother Internet Print: Using a Web Browser to Configure the Print Server
- Brother Internet Print: Installing the BIP software on Windows® 95/98/Me/2000/XP and Windows NT® 4.0
- Adding a Second Brother Internet Port
- Windows® 2000/XP IPP Printing
- Specifying a Different URL
- Other Sources of Information
- Internet Printing Installation
- 6 Novell NetWare Printing
- How to Configure Novell NetWare Printing
- Overview
- General Information
- Creating a NDPS Printer Using NWADMIN for NetWare5
- NDPS Manager
- NDPS Broker
- Creating a Printer Agent
- Configuring NetWare 3 and NetWare 4 systems
- Creating a Network Print Server (Bindery Queue Server) using BRAdmin Professional utility
- Creating a Network Print Server (NDS Queue Server) using BRAdmin Professional utility
- Creating a Network Print Server (NDS Queue Server) using Novell NWADMIN and BRAdmin Professional utility
- Creating a Network Print Server (NDS Remote Printer) using Novell NWAdmin and BRAdmin Professional utility
- Other Sources of Information
- How to Configure Novell NetWare Printing
- 7 Printing from a Macintosh®
- Printing from a Macintosh® Using AppleTalk® and TCP/IP or Simple Network Configuration capabilities
- Overview
- Macintosh® Configuration (Mac OS® 8.6 - 9.2)
- How to Select the Print Server (AppleTalk/EtherTalk)
- How to Select the Print Server (TCP/IP)
- Macintosh Configuration (Mac OS® X 10.1-10.2.1 or greater)
- How to Select the Print Server (AppleTalk/EtherTalk)
- How to Select the Print Server (TCP/IP)
- Changing the Configuration
- Other Sources of Information
- Printing from a Macintosh® using Simple Network Configuration capabilities of Mac OS® X
- Printing from a Macintosh® Using AppleTalk® and TCP/IP or Simple Network Configuration capabilities
- 8 DLC Printing
- 9 Web Based Management
- 10 Front Panel Setup Menu
- 11 TCP/IP Configuration
- Assigning TCP/IP Information
- Overview
- Using the machine control panel to allocate an IP address (Models with LCD panels only)
- Changing the IP Address using the BRAdmin Professional utility
- Using BRAdmin Professional utility and the IPX/ SPX Protocol to set the IP address
- Using BRAdmin Professional utility and the TCP/ IP Protocol to set the IP address
- Using DHCP to Configure the IP address
- Using APIPA to Configure the IP Address
- Using ARP to Configure the Print/Fax Server IP Address
- Using RARP to Configure the IP Address
- Using BOOTP to Configure the IP Address
- Assigning TCP/IP Information
- 12 Internet FAX (MFC Only)
- 13 Troubleshooting
- Overview
- Installation problems
- Resetting the Print/Fax Sever back to factory settings (Test Switch)
- Intermittent Problems
- TCP/IP Troubleshooting
- UNIX Troubleshooting
- Windows NT® 4.0/LAN Server (TCP/IP) Troubleshooting
- Windows® 95/98/Me Peer to Peer Print (LPR) Troubleshooting
- Windows® 95/98/Me Peer-to-Peer (HP JetAdmin compatible method) Troubleshooting
- Windows® 95/98/Me/2000/XP and Windows NT® 4.0 Peer-to-Peer Print (NetBIOS) Troubleshooting
- Brother Internet Print (TCP/IP) Troubleshooting
- Windows® 95/98/Me/2000/XP IPP Troubleshooting
- Novell NetWare Troubleshooting
- AppleTalk Troubleshooting
- DLC/LLC Troubleshooting
- Web Browser Troubleshooting (TCP/IP)
- Internet Fax Troubleshooting
- 14 Brother Internet Fax Printing Software
- Appendix
- INDEX
13 - 13 TROUBLESHOOTING
Internet Fax Troubleshooting
1
If there is a mail delivery error while sending an Internet Fax, the
mail server will send an error message back to the machine and
the error message will be printed. If there is an error while
receiving mail, an error message is printed (Ex.
The message
being sent to the machine was not in a TIFF-F format.
) All
documents transmitted to the machine via E-mail must be in a
TIFF-F format.
2
If an error message is printed while receiving E-mail text from a
PC
ATTACHED FILE FORMAT NOT SUPPORTED
the
senders mail application may not be set for a
Plain Text
format
or
Vcard
the virtual business card feature may be set to
ON
.
3
If the receiver’s mail system is not compatible with the MIME
format, you cannot transmit a document to the receiver.
Depending on the receiver's server, there are some cases that
the error mail will not be sent back.
4
Messages cannot be received in an HTML format. This format
is not supported. All messages must be received in a TIFF-F
Format.
5
If the size of a documents image data is huge, there is a
possibility of unsuccessful transmission if the system
administrator has imposed a limit on the maximum size of E-
mails and their attachments. The document you are sending
should be separated into smaller documents that will be
accepted by the mail server. (Ex. A 42 page document of the
CCITT#1 test chart is approximately 1Mbyte in size).
6
If you do not receive E-mail, check the Auto Polling setting and
Polling frequency.
7
If you cannot retrieve mail from the mail server, check the
settings for the POP3 server and Mailbox name. Check that the
POP3 password is entered correctly. This setting is case
sensitive.
8
If Relay Broadcast is not forwarding E-mail to a G3 Fax, check
the Relay Broadcast settings and Relay Domain registration. A
Relay Domain must be entered for this function to work.