Network User's Guide

UNIX PRINTING 1 - 9
The procedure for pre-V4.0 systems is as follows.
1
Enter smit and select
devices
.
2
Select
printer/plotter
.
3
Select
manage remote printer subsystem
.
4
Select
client services
.
5
Select
remote printer queues
.
6
Select
add a remote queue
.
7
Enter the following remote queue settings:
■
Name of queue to add
(user selectable).
■
Activate the queue
(
Yes
).
■
Destination host
(Print/Fax server name; must match name
in
/etc/hosts
file or use the Print/Fax server IP address)
■
Name of queue on remote printer
(Print/Fax server binary
or text service name, eg. BINARY_P1 or TEXT_P1).
■
Name of device to add
(user selectable; for example
lp0
).
Sun Solaris 2.x Configuration
Sun Solaris 2.x uses the lpsystem and lpadmin programs for remote
printer configuration:
lpsystem -t bsd prnservername
lpadmin -p queue -s prnservername!prnserverservice
accept queue
(not required on newer Solaris systems)
enable queue
(not required on newer Solaris systems)
Where
queue
is the name of the local Print/Fax queue.
prnservername
is the name of the Print/Fax server (must match
the entry in the
/etc/hosts
file or IP address).
prnserverservice
is the print server BINARY_P1 or TEXT_P1
service.