Network User's Guide
Table Of Contents
- Network User’s Guide
- Introduction
- IMPORTANT INFORMATION: REGULATIONS
- Table of Contents
- 1 Unix Printing
- 2 TCP/IP Printing
- Printing from Windows NT® 4.0, Windows® 2000/XP, LAN Server and Warp Server
- Overview
- Windows NT® 4.0 and Windows® 2000/XP (TCP/IP) Configuration
- Windows® 2000/XP Printing (Printer Driver not yet installed)
- Windows® 2000/XP Printing (Printer Driver already installed)
- Windows NT® 4.0 Printing
- Windows NT® 4.0 Printing Installing the Brother Peer to Peer Software
- Windows NT® 4.0 Printing Associating to the Printer
- Windows NT® 4.0 Printing Adding a Second Brother LPR Port
- Other Sources of Information
- Printing from Windows NT® 4.0, Windows® 2000/XP, LAN Server and Warp Server
- 3 Peer to Peer Printing
- 4 NetBIOS Peer to Peer Printing
- How to Print Using NetBIOS in Windows® 95/98/Me/2000/XP, Windows NT® 4.0, LAN Server and OS/2 Warp Server
- 5 Configuring Internet Printing for Windows®
- Internet Printing Installation
- Overview
- Brother Internet Print General Information
- Brother Internet Print: Configuring the Brother Print/Fax Server
- Brother Internet Print: Using BRAdmin Professional utility to Configure the Print Server
- Brother Internet Print: Using a Web Browser to Configure the Print Server
- Brother Internet Print: Installing the BIP software on Windows® 95/98/Me/2000/XP and Windows NT® 4.0
- Adding a Second Brother Internet Port
- Windows® 2000/XP IPP Printing
- Specifying a Different URL
- Other Sources of Information
- Internet Printing Installation
- 6 Novell NetWare Printing
- How to Configure Novell NetWare Printing
- Overview
- General Information
- Creating a NDPS Printer Using NWADMIN for NetWare5
- NDPS Manager
- NDPS Broker
- Creating a Printer Agent
- Configuring NetWare 3 and NetWare 4 systems
- Creating a Network Print Server (Bindery Queue Server) using BRAdmin Professional utility
- Creating a Network Print Server (NDS Queue Server) using BRAdmin Professional utility
- Creating a Network Print Server (NDS Queue Server) using Novell NWADMIN and BRAdmin Professional utility
- Creating a Network Print Server (NDS Remote Printer) using Novell NWAdmin and BRAdmin Professional utility
- Other Sources of Information
- How to Configure Novell NetWare Printing
- 7 Printing from a Macintosh®
- Printing from a Macintosh® Using AppleTalk® and TCP/IP or Simple Network Configuration capabilities
- Overview
- Macintosh® Configuration (Mac OS® 8.6 - 9.2)
- How to Select the Print Server (AppleTalk/EtherTalk)
- How to Select the Print Server (TCP/IP)
- Macintosh Configuration (Mac OS® X 10.1-10.2.1 or greater)
- How to Select the Print Server (AppleTalk/EtherTalk)
- How to Select the Print Server (TCP/IP)
- Changing the Configuration
- Other Sources of Information
- Printing from a Macintosh® using Simple Network Configuration capabilities of Mac OS® X
- Printing from a Macintosh® Using AppleTalk® and TCP/IP or Simple Network Configuration capabilities
- 8 DLC Printing
- 9 Web Based Management
- 10 Front Panel Setup Menu
- 11 TCP/IP Configuration
- Assigning TCP/IP Information
- Overview
- Using the machine control panel to allocate an IP address (Models with LCD panels only)
- Changing the IP Address using the BRAdmin Professional utility
- Using BRAdmin Professional utility and the IPX/ SPX Protocol to set the IP address
- Using BRAdmin Professional utility and the TCP/ IP Protocol to set the IP address
- Using DHCP to Configure the IP address
- Using APIPA to Configure the IP Address
- Using ARP to Configure the Print/Fax Server IP Address
- Using RARP to Configure the IP Address
- Using BOOTP to Configure the IP Address
- Assigning TCP/IP Information
- 12 Internet FAX (MFC Only)
- 13 Troubleshooting
- Overview
- Installation problems
- Resetting the Print/Fax Sever back to factory settings (Test Switch)
- Intermittent Problems
- TCP/IP Troubleshooting
- UNIX Troubleshooting
- Windows NT® 4.0/LAN Server (TCP/IP) Troubleshooting
- Windows® 95/98/Me Peer to Peer Print (LPR) Troubleshooting
- Windows® 95/98/Me Peer-to-Peer (HP JetAdmin compatible method) Troubleshooting
- Windows® 95/98/Me/2000/XP and Windows NT® 4.0 Peer-to-Peer Print (NetBIOS) Troubleshooting
- Brother Internet Print (TCP/IP) Troubleshooting
- Windows® 95/98/Me/2000/XP IPP Troubleshooting
- Novell NetWare Troubleshooting
- AppleTalk Troubleshooting
- DLC/LLC Troubleshooting
- Web Browser Troubleshooting (TCP/IP)
- Internet Fax Troubleshooting
- 14 Brother Internet Fax Printing Software
- Appendix
- INDEX
4 - 5 NETBIOS PEER TO PEER PRINTING
7
You must now enter the server name and port name for the
actual Print/Fax server. You can use the
Browse
button to
search for the Print/Fax server, select the domain/workgroup
name, and then the server is listed. If the print server does not
automatically appear in your browse list, then you must ensure
that the domain name is configured correctly. Otherwise you
must enter the name manually. The name should be compliant
with UNC (Universal Name Convention). For example:
\\NodeName\ServiceName
.
Where NodeName is the NetBIOS name of the Brother Print/
Fax server (the default name is usually
BRN_xxxxxx
, where
xxxxxx
is the last six digits of the Ethernet address), and
ServiceName
is the service name for NetBIOS of the Print/
Fax server. By default it is BINARY_P1. For example:
\\BRN_310107\BINARY_P1
8
Then press
OK
.
9
Click the
Finish
button. You must now restart your computer
before you can continue.
Associating the Printer
1
You must now create a printer on your Windows
®
95/98/Me
/
2000/XP and Windows NT
®
4.0 systems using the standard
Windows
®
printer setup procedure. To do this, go the
Start
button, select
Setting
and then
Printers
.
Windows
®
95/98/Me
2
Select
Add Printer
to begin the printer installation.
3
Click
Next
when you get the
Add Printer Wizard
window.
You can find the NetBIOS name and MAC address by
printing out the printer configuration page. see Resetting the
Print/Fax Sever back to factory settings (Test Switch) on
page 13-4 for information on how to print the configuration
page on your Print/Fax server.