Network User's Guide

6 - 12 NOVELL NETWARE PRINTING
Creating a Network Print Server (NDS Remote
Printer) using Novell NWAdmin and BRAdmin
Professional utility
To configure a Brother Print/Fax server for remote printer mode with
NWADMIN (NetWare Administrator utility) and BRAdmin
Professional utility, you will need to perform the following steps:
1
Make sure that the PSERVER NLM (NetWare Loadable
Module) is loaded on your file server and that you are logged in
as
ADMIN
in NDS mode on the NetWare 4.1x file server.
2
Start NWADMIN by double clicking on the icon. Select the
desired
Context
that will contain the new printer.
3
Select
Object
from the menu bar and then
Create
. When you
get the
New Object
menu, select
Printer
and then
OK
.
4
Enter the name of the printer and select
Create
.
5
Double click on the Print server name of your PSERVER NLM.
Click on
Assignments
and then
Add
.
6
If necessary, change the directory context. Select the printer
you created and click
OK
. Note the number of the printer, as you
will use this later, then click
OK
.
7
Select the desired
Context
that will contain the default print
queue, and then click on
Object
and
Create
to get
New Object
menu.
8
Select
Print Queue
and then
OK
. Make sure that Directory
Service Queue is selected, and then type in a name for the
default print queue.
9
Click on the button to select the print queue volume. Change the
directory context if necessary, then select the desired volume
(Objects) and click
OK
. Click
Create
to create the print queue.
10
Change context if required and then double click the name of the
printer you created previously.
11
Click
Assignments
and then
Add
.