Network User's Guide

PRINTING FROM A MACINTOSH
®
7 - 6
2
At this point we must select the correct PPD file for the
machine and also configure the correct LPR information.
Click the
Change
button in the
PostScript Printer
Description (PPD) File
section and select the appropriate
PPD file for your model.
3
Now select the
Change
button below the
LPR Printer
Selection
text.
4
You must then enter the IP address and service name details
of the machine. When specifying the
Queue
, use the value
brn_xxxxxx_p1_at
where
xxxxxx
are the last 6 digits of
the Ethernet address.
Figure 5 Entering the IP address and Queue
5
Click
OK
to go back to the previous screen.
If you do not specify the correct value the machine may not
print, or it may not print the data correctly. Please ensure that
the value you enter here matches with the Service name of
the machine.