Network User's Guide
Table Of Contents
- Network User’s Guide
- Introduction
- IMPORTANT INFORMATION: REGULATIONS
- Table of Contents
- 1 Unix Printing
- 2 TCP/IP Printing
- Printing from Windows NT® 4.0, Windows® 2000/XP, LAN Server and Warp Server
- Overview
- Windows NT® 4.0 and Windows® 2000/XP (TCP/IP) Configuration
- Windows® 2000/XP Printing (Printer Driver not yet installed)
- Windows® 2000/XP Printing (Printer Driver already installed)
- Windows NT® 4.0 Printing
- Windows NT® 4.0 Printing Installing the Brother Peer to Peer Software
- Windows NT® 4.0 Printing Associating to the Printer
- Windows NT® 4.0 Printing Adding a Second Brother LPR Port
- Other Sources of Information
- Printing from Windows NT® 4.0, Windows® 2000/XP, LAN Server and Warp Server
- 3 Peer to Peer Printing
- 4 NetBIOS Peer to Peer Printing
- How to Print Using NetBIOS in Windows® 95/98/Me/2000/XP, Windows NT® 4.0, LAN Server and OS/2 Warp Server
- 5 Configuring Internet Printing for Windows®
- Internet Printing Installation
- Overview
- Brother Internet Print General Information
- Brother Internet Print: Configuring the Brother Print/Fax Server
- Brother Internet Print: Using BRAdmin Professional utility to Configure the Print Server
- Brother Internet Print: Using a Web Browser to Configure the Print Server
- Brother Internet Print: Installing the BIP software on Windows® 95/98/Me/2000/XP and Windows NT® 4.0
- Adding a Second Brother Internet Port
- Windows® 2000/XP IPP Printing
- Specifying a Different URL
- Other Sources of Information
- Internet Printing Installation
- 6 Novell NetWare Printing
- How to Configure Novell NetWare Printing
- Overview
- General Information
- Creating a NDPS Printer Using NWADMIN for NetWare5
- NDPS Manager
- NDPS Broker
- Creating a Printer Agent
- Configuring NetWare 3 and NetWare 4 systems
- Creating a Network Print Server (Bindery Queue Server) using BRAdmin Professional utility
- Creating a Network Print Server (NDS Queue Server) using BRAdmin Professional utility
- Creating a Network Print Server (NDS Queue Server) using Novell NWADMIN and BRAdmin Professional utility
- Creating a Network Print Server (NDS Remote Printer) using Novell NWAdmin and BRAdmin Professional utility
- Other Sources of Information
- How to Configure Novell NetWare Printing
- 7 Printing from a Macintosh®
- Printing from a Macintosh® Using AppleTalk® and TCP/IP or Simple Network Configuration capabilities
- Overview
- Macintosh® Configuration (Mac OS® 8.6 - 9.2)
- How to Select the Print Server (AppleTalk/EtherTalk)
- How to Select the Print Server (TCP/IP)
- Macintosh Configuration (Mac OS® X 10.1-10.2.1 or greater)
- How to Select the Print Server (AppleTalk/EtherTalk)
- How to Select the Print Server (TCP/IP)
- Changing the Configuration
- Other Sources of Information
- Printing from a Macintosh® using Simple Network Configuration capabilities of Mac OS® X
- Printing from a Macintosh® Using AppleTalk® and TCP/IP or Simple Network Configuration capabilities
- 8 DLC Printing
- 9 Web Based Management
- 10 Front Panel Setup Menu
- 11 TCP/IP Configuration
- Assigning TCP/IP Information
- Overview
- Using the machine control panel to allocate an IP address (Models with LCD panels only)
- Changing the IP Address using the BRAdmin Professional utility
- Using BRAdmin Professional utility and the IPX/ SPX Protocol to set the IP address
- Using BRAdmin Professional utility and the TCP/ IP Protocol to set the IP address
- Using DHCP to Configure the IP address
- Using APIPA to Configure the IP Address
- Using ARP to Configure the Print/Fax Server IP Address
- Using RARP to Configure the IP Address
- Using BOOTP to Configure the IP Address
- Assigning TCP/IP Information
- 12 Internet FAX (MFC Only)
- 13 Troubleshooting
- Overview
- Installation problems
- Resetting the Print/Fax Sever back to factory settings (Test Switch)
- Intermittent Problems
- TCP/IP Troubleshooting
- UNIX Troubleshooting
- Windows NT® 4.0/LAN Server (TCP/IP) Troubleshooting
- Windows® 95/98/Me Peer to Peer Print (LPR) Troubleshooting
- Windows® 95/98/Me Peer-to-Peer (HP JetAdmin compatible method) Troubleshooting
- Windows® 95/98/Me/2000/XP and Windows NT® 4.0 Peer-to-Peer Print (NetBIOS) Troubleshooting
- Brother Internet Print (TCP/IP) Troubleshooting
- Windows® 95/98/Me/2000/XP IPP Troubleshooting
- Novell NetWare Troubleshooting
- AppleTalk Troubleshooting
- DLC/LLC Troubleshooting
- Web Browser Troubleshooting (TCP/IP)
- Internet Fax Troubleshooting
- 14 Brother Internet Fax Printing Software
- Appendix
- INDEX
FRONT PANEL SETUP MENU 10 - 9
APIPA
The setting of On will cause the print server to automatically allocate
a Link-Local IP address in the range (169.254.1.0 -
169.254.254.255) when the print/fax server cannot obtain an IP
address through the BOOT Method you have set (Menu, 6, 1).
Selecting Off means the IP address doesn’t change, when the print/
fax server cannot obtain an IP address through the BOOT Method
you have set
1
(For MFC) Press
Menu
,
6
,
1
,
9
.
(For DCP) Press
Menu
,
4
,
1
,
9
.
2
Press or to select
On
or
Off
.
3
Press
Set
.
4
Press
Stop/Exit
.