User Manual
Table Of Contents
- NETWORK USER’S GUIDE
- Table of Contents
- 1 Introduction
- 2 Configuring your machine for a network
- Overview
- IP addresses, subnet masks and gateways
- Step by step chart
- Setting the IP address and subnet mask
- Changing the print server settings
- Using the BRAdmin Light utility to change the print server settings
- Using the BRAdmin Professional 3 utility to change print server settings (Windows®)
- Using the control panel to change the print server settings
- Using Web Based Management (web browser) to change the print/scan server settings
- Using Remote Setup to change the print server settings (Not available for Windows Server® 2003/2008) (Not available for DCP-8085DN and DCP-8080DN)
- Using other methods to change print server settings
- 3 Configuring your machine for a wireless network (For MFC-8890DW)
- Overview
- Wireless network terms and concepts
- Step by step chart for wireless network configuration
- Confirm your network environment
- Confirm your wireless network setup method
- Configuration using the machine’s control panel Setup Wizard to configure your machine for a wireless network
- Configuration using the SES/WPS or AOSS™ control panel menu (Automatic Wireless mode) (Infrastructure mode only)
- Configuration using the PIN Method of Wi-Fi Protected Setup (Infrastructure mode only)
- Configuration using the Brother installer application on the CD-ROM to configure your wireless network machine
- Configure your machine for a wireless network
- Using the Setup Wizard from the control panel
- Using the SES/WPS or AOSS™ control panel menu to configure your machine for a wireless network (Automatic Wireless mode)
- Using the PIN Method of Wi-Fi Protected Setup
- Using the Brother installer application on the CD-ROM to configure your machine for a wireless network
- 4 Wireless configuration for Windows® using the Brother installer application (For MFC-8890DW)
- 5 Wireless configuration for Macintosh using the Brother installer application (For MFC-8890DW)
- 6 Control panel setup
- Network menu
- TCP/IP
- Ethernet (wired network only)
- Setup Wizard (MFC-8890DW wireless network only)
- SES/WPS or AOSS™ (MFC-8890DW wireless network only)
- WPS w/PIN Code (MFC-8890DW wireless network only)
- WLAN Status (MFC-8890DW wireless network only)
- Set to Default (MFC-8890DW only)
- Wired Enable (MFC-8890DW wired network only)
- WLAN Enable (MFC-8890DW wireless network only)
- E-mail / IFAX (MFC-8880DN and MFC-8890DW only)
- How to set a new default for Scan to E-mail (E-mail server) (MFC-8880DN and MFC-8890DW only)
- How to set a new default for Scan to FTP
- How to set a new default for Scan to Network
- Fax to Server (For MFC-8880DN and MFC-8890DW)
- Time Zone
- Restoring the network settings to factory default
- Printing the Network Configuration List
- Network menu
- 7 Driver Deployment Wizard (Windows® only)
- 8 Network printing from Windows®: basic TCP/IP Peer-to-Peer printing
- 9 Internet printing for Windows®
- 10 Network printing from Macintosh using the BR-Script 3 driver
- 11 Web Based Management
- Overview
- How to configure the machine settings using Web Based Management (web browser)
- Password information
- Secure Function Lock 2.0 (Not available for MFC-8370DN)
- Changing the Scan to FTP configuration using a web browser
- Changing the Scan to Network configuration using a web browser
- Changing the LDAP configuration using a web browser (For MFC-8880DN and MFC-8890DW)
- 12 LDAP operation (For MFC-8880DN and MFC-8890DW)
- 13 Internet fax and Scan to E-mail (E-mail server) (For MFC-8880DN and MFC-8890DW)
- Internet fax Overview
- Getting connected
- Control panel key functions
- Sending an Internet fax
- Manually entering text
- Receiving E-mail or Internet fax
- Receiving an Internet fax to your computer
- Forwarding received E-mail and fax messages
- Relay broadcasting
- TX Verification Mail
- Setup Mail TX
- Setup Mail RX
- Error mail
- Important information on Internet fax
- Scan to E-mail (E-mail server) overview
- Internet fax Overview
- 14 Security features
- Overview
- Configuring the protocol settings
- Managing your network printer securely
- Printing documents securely using IPPS
- Using E-mail notification with user authentication (For MFC-8880DN and MFC-8890DW)
- Creating and installing a certificate
- 15 Troubleshooting
- Appendix A
- Using services
- Other ways to set the IP address (for advanced users and administrators)
- Using DHCP to configure the IP address
- Using BOOTP to configure the IP address
- Using RARP to configure the IP address
- Using APIPA to configure the IP address
- Using ARP to configure the IP address
- Using the TELNET console to configure the IP address
- Using the Brother Web BRAdmin server software for IIS to configure the IP address
- Installation when using web services (Windows Vista®)
- Installation when using a Network Print Queue or Share (printer driver only)
- Appendix B
- Appendix C
- Index
Introduction
10
1
Web services 1
The Web Services protocol enables Windows Vista
®
users to install the Brother printer driver by right clicking
the machine icon from the Start / Network selection.
See Installation when using web services (Windows Vista
®
) on page 207.
The Web Services also lets you check the current status of the machine from your computer.
Web server (HTTP) 1
The Brother print server is equipped with a built in web server that allows you to monitor its status or change
some of its configuration settings using a web browser.
Note
• We recommend Microsoft
®
Internet Explorer
®
6.0 (or greater) or Firefox 1.0 (or greater) for Windows
®
and
Safari 1.3 (or greater) for Macintosh. Please also make sure that JavaScript and Cookies are always
enabled in whichever browser you use. If a different web browser is used, make sure it is compatible with
HTTP 1.0 and HTTP 1.1.
• For the HTTPS protocol, see Security protocols on page 165.
FTP 1
The File Transfer Protocol (FTP) allows the Brother machine to scan black and white or color documents
directly to an FTP server located locally on your network or on the internet.
SNTP 1
The Simple Network Time Protocol is used to synchronize computer clocks on a TCP/IP network. You can
configure the SNTP settings using Web Based Management (web browser). (For the details, see Web Based
Management on page 141.)
CIFS 1
The Common Internet File System is the standard way that computer users share files and printers in
Windows
®
.
LDAP (For MFC-8880DN and MFC-8890DW only) 1
The Lightweight Directory Access Protocol (LDAP) allows the Brother machine to search for information such
as fax numbers and E-mail addresses from an LDAP server.
IPv6 1
This machine is compatible with IPv6, the next generation internet protocol. For more information on the IPv6
protocol, visit http://solutions.brother.com/.