User Manual
Table Of Contents
- Quick Setup Guide DCP-8110DN
- Start Here
- 1 Unpack the machine and check the components
- 2 Remove the packing material from the machine
- 3 Load paper in the paper tray
- 4 Connect the power cord
- 5 Choose your language
- 6 Set the LCD contrast (if needed)
- 7 Set the date and time
- 8 Automatic Daylight Saving Time
- 9 Set the Time Zone
- 10 Choose your connection type
- For USB Interface Users (Windows® XP/XP Professional x64 Edition/Windows Vista®/ Windows® 7)
- For USB Interface Users (Mac OS X 10.5.8 - 10.7.x)
- For Wired Network Interface Users (Windows® XP/XP Professional x64 Edition/Windows Vista®/ Windows® 7)
- For Wired Network Interface Users (Mac OS X 10.5.8 - 10.7.x)
- For Network Users
- Other Information
- Options and Consumables
- Start Here
5
4
Connect the power cord
a Connect the AC power cord to the machine and
then plug it into an electrical socket.
b Turn the machine's power switch on.
5
Choose your language
a After turning the power switch on, the LCD
shows:
Select Language
a English
Français
b Deutsch
Select ab or OK
Press a or b to choose your language and
press OK.
b The LCD prompts you to confirm your
selection.
Select Language
English
1.Yes
2.No
Enter Number
If the LCD shows the correct language,
press 1.
—OR—
Press 2 to go back to step a to choose the
language again.
6
Set the LCD contrast
(if needed)
If you are having difficulty reading the LCD, try
changing the contrast setting.
a Press Menu, 1, 6.
b Press c to increase the contrast.
—OR—
Press d to decrease the contrast.
Press OK.
c Press Stop/Exit.
Important
DO NOT connect the interface cable
yet.
Note
If you have set the wrong language, you can
change the language from the control panel menu
of the machine. (Menu, 1, 0)