User Manual
Table Of Contents
- Quick Setup Guide DCP-8110D/DCP-8110DN/DCP-8155DN
- Start Here
- 1 Unpack the machine and check the components
- 2 Remove the packing material from the machine
- 3 Load paper in the paper tray
- 4 Replace the control panel cover (if needed) (for Middle East and Turkey)
- 5 Connect the power cord
- 6 Set your country (for Middle East, Africa and Turkey)
- 7 Choose your language (if needed) (not available in some countries)
- 8 Set the LCD contrast (if needed)
- 9 Set the date and time
- 10 Set Daylight Saving Time (for Asia and Oceania)
- 11 Automatic Daylight Saving Time (for Middle East, Africa and Turkey)
- 12 Set the Time Zone (not available for DCP-8110D)
- 13 Choose your connection type
- For USB Interface Users (Windows® XP/XP Professional x64 Edition/Windows Vista®/Windows® 7)
- For USB Interface Users (Mac OS X 10.5.8 - 10.7.x)
- For Wired Network Interface Users (Windows® XP/XP Professional x64 Edition/Windows Vista®/Windows® 7) (not available for DCP-8110D)
- For Wired Network Interface Users (Mac OS X 10.5.8 - 10.7.x) (not available for DCP-8110D)
- For Network Users (not available for DCP-8110D)
- Other Information
- Options and Consumables
- Start Here
6
4
Replace the control panel
cover (if needed) (for
Middle East and Turkey)
a Open the document cover.
b Choose your language and attach the control
panel cover to the machine.
5
Connect the power cord
a Connect the AC power cord to the machine and
then plug it into an electrical socket.
b Turn the machine's power switch on.
6
Set your country (for
Middle East, Africa and
Turkey)
a Check that the power is turned on by plugging
in the power cord and turn the power switch on.
b Press a or b to choose the country.
Set Country
a South Africa
Türkiye
b Others
Select ab or OK
Press OK when the LCD shows your country.
c The LCD prompts you to make sure of the
country again.
(Example for Others)
Set Country
Others
1.Yes
2.No
Enter Number
d If the LCD shows the correct country, press 1
to go to step e.
—OR—
Press 2 to go back to step b to choose the
country again.
e After the LCD shows Accepted, the machine
will restart automatically. After the restart, the
LCD shows Please Wait.
Note
If the control panel cover is not fitted correctly, the
key operations will not work.
Important
DO NOT connect the interface cable
yet.