User Manual
Table Of Contents
- Product Safety Guide
- Symbols and conventions used in the documentation
- Compilation and Publication Notice
- Choose a safe location for your product
- General precautions
- Connecting the product safely
- Servicing the product
- Product Warranty & Liability
- Approval Information (MFC only)
- Declaration of Conformity (Europe only) (HL-5470DW / HL-6180DW(T) / MFC-8510DN / MFC-8520DN / MFC-8950DW(T) only)
- Declaration of Conformity (Europe only) (HL-5440D / HL-5450DN(T) / DCP-8110DN / DCP-8250DN only)
- IEC60825-1:2007 Specification (For 220-240V Models Only)
- Disconnect device
- LAN connection (Network models only)
- Radio interference
- Recycling information in accordance with the WEEE (2002/96/EC) and Battery (2006/66/EC) Directives
- International ENERGY STARĀ® Qualification Statement
- Trademarks
- Open Source Licensing Remarks
- Copyright and License
- Other Information
- Unlawful use of copying equipment (MFC and DCP only)
7
(DCP-8250DN/MFC-8950DW(T) only)
This product is heavy and weighs more than 18.0 kg including paper. To prevent possible
injuries at least two people should lift the product by holding it from the front and back.
If you use a Lower Tray, DO NOT carry the product with the Lower Tray as you may be injured
or cause damage to the product because it is not attached to the Lower Tray.
(MFC only)
Use caution when modifying telephone lines. Never touch exposed telephone wiring or
terminals unless the telephone line has been unplugged at the wall socket. Never fit telephone
wiring during a lightning storm. Never fit a telephone wall socket in a wet location. Doing this
might cause an electrical shock.
CAUTION
(MFC and DCP only)
To prevent injuries, be careful not to put your fingers in the areas shown in the illustrations.