User Manual
Table Of Contents
- Basic User’s Guide DCP-8110DN
- User's Guides and where do I find them?
- Table of Contents
- 1 General information
- 2 Loading paper
- Loading paper and print media
- Paper settings
- Acceptable paper and other print media
- 3 Loading documents
- 4 Making copies
- 5 Printing data from a USB Flash memory drive or digital camera supporting mass storage
- 6 How to print from a computer
- 7 How to scan to a computer
- A Routine maintenance
- B Troubleshooting
- C Menu and features
- D Specifications
- Index
How to scan to a computer
35
7
Changing the SCAN key settings 7
Before scanning 7
To use the machine as a scanner, install a scanner driver. If the machine is on a network,
configure it with a TCP/IP address.
Install the scanner drivers from the Installer CD-ROM. (uu Quick Setup Guide)
Configure the machine with a TCP/IP address if network scanning does not work.
(uu Software User's Guide: Configuring Network Scanning (Windows
®
))
SCAN key settings 7
You can change your machine’s SCAN key settings using ControlCenter4.
a Open ControlCenter4 by clicking Start/All Programs/Brother/XXX-XXXX (where
XXX-XXXX is your model name)/ControlCenter4. The ControlCenter4 application will open.
b Make sure the machine you want to use is selected from the Model pull-down list.
c Click the Device Settings tab.
d Click Device Scan Settings.