User Manual
Table Of Contents
- Basic User’s Guide DCP-8110DN
- User's Guides and where do I find them?
- Table of Contents
- 1 General information
- 2 Loading paper
- Loading paper and print media
- Paper settings
- Acceptable paper and other print media
- 3 Loading documents
- 4 Making copies
- 5 Printing data from a USB Flash memory drive or digital camera supporting mass storage
- 6 How to print from a computer
- 7 How to scan to a computer
- A Routine maintenance
- B Troubleshooting
- C Menu and features
- D Specifications
- Index
66
Replace Parts
Laser Unit
It is time to replace the laser
unit.
Call Brother customer service or a Brother
Authorized Service Center to replace the laser
unit.
Replace Parts
PF Kit 1
PF Kit 2
PF Kit MP
It is time to replace the paper
feeding kit.
Call Brother customer service or a Brother
Authorized Service Center to replace the
PF Kit.
Replace Toner The toner cartridge is at the
end of its life. The machine will
stop all print operations.
Replace the toner cartridge.
(See Replacing the toner cartridge
uu page 40.)
Scan Unable XX The machine has a mechanical
problem.
Turn the power switch off, and then turn it
on again.
If the problem continues, call Brother
customer service for support.
Size Error The paper size defined in the
printer driver is not suitable for
the tray in use.
Choose a paper size which is supported by the
tray shown on the LCD.
(See Paper Size uu page 17.)
Size Error DX The paper size defined in the
printer driver and the control
panel menu is not suitable for
automatic duplex printing.
Press Stop/Exit. Choose a paper size which is
supported by the duplex tray.
The paper size you can use for automatic
duplex printing is A4.
The paper in the tray is not the
correct size and is not suitable
for automatic duplex printing.
Press Start. Load the correct size of paper in
the tray and set the “Paper Size” (Menu, 1, 1,
2).
The paper size you can use for automatic
duplex printing is A4.
Size mismatch The paper in the tray is not the
correct size.
Load the correct size of paper in the tray and
set the “Paper Size” (Menu, 1, 1, 2).
(See Paper Size uu page 17.)
Toner Low If the LCD shows Toner Low
you can still print; however, the
machine is telling you that the
toner cartridge is near the end
of its life.
Order a new toner cartridge now so a
replacement toner cartridge will be available
when the LCD shows Replace Toner.
Too Many Files There are too many files stored
on the USB Flash memory
drive.
Reduce the number of files stored on the USB
Flash memory drive.
Unusable Device
Re
move the
Device. Turn the
power off and
back on again.
A defective USB device or a
high power consumption USB
device has been connected to
the USB direct interface.
Unplug the device from the USB direct
interface. Turn the machine off and then on
again.
Error Message Cause Action