Operation Manual

Troubleshooting
119
B
Reset functions B
The following reset functions are available:
1 Network
You can reset the internal print server
back to its default factory settings such as
the password and IP address information.
2 All Settings
You can reset all the machine’s settings
back to the factory default.
Brother strongly recommends you
perform this operation when you dispose
of the machine.
NOTE
(DCP-9020CDW)
Unplug the interface cable before you
choose Network or All Settings.
How to reset the machine B
a Press .
b Press All Settings.
c Swipe up or down, or press a or b to
display Initial Setup.
d Press Initial Setup.
e Press Reset.
f Press Network or All Settings to
choose the reset function you want.
g Do one of the following;
 To reset the settings, press Yes and
go to step h.
 To exit without making changes,
press No.
h You will be asked to reboot the machine.
Do one of the following;
 To reboot the machine press Yes for
2 seconds. The machine will begin
the reboot.
 To exit without rebooting the
machine, press No.
NOTE
• If you do not reboot your machine, the
reset will not complete and your settings
will remain unchanged.
• You can also reset the Network settings
by pressing , All Settings,
Network, Network Reset.