Operation Manual

Settings and features tables
131
C
Network
(continued)
Wi-Fi Direct
(continued)
PIN Code ———
You can easily
configure your Wi
- Fi
Direct
™ network
settings using WPS
with a PIN code.
Manual — — — You can manually
configure your
Wi-Fi Direct™
network settings.
Group Owner ——On
Off*
Set your machine as
the Group Owner.
Device
Information
Device Name —— You can see the device
name of your machine.
SSID — — Shows SSID of the
Group Owner.
When the machine is not
connected, the
Touchscreen shows
Not Connected .
IP Address — — You can see the
current IP Address
of your machine.
Status
Information
Status — G/O Active(**)
Client Active
Not Connected
Off
Wired LAN Active
(DCP-9020CDW)
** = the number
of devices
You can see the
current Wi-Fi
Direct™ network
status.
Signal — Strong
Medium
Weak
None
You can see the
current Wi-Fi
Direct™ network
signal strength.
When your machine
acts as the Group
Owner, the
Touchscreen always
shows
Strong .
Level 1 Level 2 Level 3 Level 4 Level 5 Options Descriptions
Network User’s Guide
Visit the Brother Solutions Center to download the Wi-Fi Direct™ Guide at http://solutions.brother.com/.
Visit the Brother Solutions Center to download the Web Connect Guide at http://solutions.brother.com/
.
The factory settings are shown in Bold with an asterisk.