BASIC USER’S GUIDE DCP-J515W DCP-J715W Version 0 UK/IRE/GEN
If you need to call Customer Service Please complete the following information for future reference: Model Number: DCP-J515W, DCP-J715W (Circle your model number) Serial Number: 1 Date of Purchase: Place of Purchase: 1 The serial number is on the back of the unit. Retain this User's Guide with your sales receipt as a permanent record of your purchase, in the event of theft, fire or warranty service. Register your product on-line at http://www.brother.
User's Guides and where do I find it? Which manual? What's in it? Where is it? Safety and Legal Please read the Safety Instructions before you set up your machine. Printed / In the box Quick Setup Guide Read this Guide first. Follow the instructions for setting up your machine and installing the drivers and software for the operating system and connection type you are using.
Table of Contents (BASIC USER’S GUIDE) 1 General information 1 Using the documentation .......................................................................................1 Symbols and conventions used in the documentation ....................................1 Accessing the Advanced User’s Guide, Software User’s Guide and Network User’s Guide.........................................................................................1 Viewing Documentation..................................................
Printing photos from a memory card or USB Flash memory drive 25 PhotoCapture Center™ Operations..................................................................... 25 Using a memory card or USB Flash memory drive .......................................25 Getting started ..................................................................................................... 26 Print Images.........................................................................................................
D Specifications 69 General ................................................................................................................69 Print media...........................................................................................................71 Copy ....................................................................................................................72 PhotoCapture Center™ .......................................................................................
Table of Contents (ADVANCED USER’S GUIDE) The Advanced User's Guide explains the following features and operations. You can view the Advanced User's Guide on the Documentation CD-ROM.
vi
1 General information Using the documentation The following symbols and conventions are used throughout the documentation. Bold Bold typeface identifies specific buttons on the machine’s control panel, or on the computer screen. Italics Italicized typeface emphasizes an important point or refers you to a related topic. Courier New Text in the Courier New font identifies messages on the LCD of the machine.
Chapter 1 c Click your country. How to find Scanning instructions 1 There are several ways you can scan documents. You can find the instructions as follows: Software User’s Guide Scanning ControlCenter Network Scanning d Point to your language, point to View Guide, and then click the guide you want to read.
General information Accessing Brother Support (Windows®) You can find all the contacts you will need, such as Web support (Brother Solutions Center) on the Installation CD-ROM. 1 Accessing Brother Support (Macintosh) Double-click the Brother Support icon. The following screen will appear: To access our website (http://www.brother.com), click Brother Home Page. (DCP-J715W only) To download and install Presto! PageManager, click Presto! PageManager.
Chapter 1 Control panel overview 1 The DCP-J515W and DCP-J715W have the same control panel keys. 8 6 5 Mem. COPY Quality Enlarge/Reduce 7 01 Normal 100% Ratio: 1 1 LCD (Liquid Crystal Display) Displays messages on the screen to help you set up and use your machine. Also, you can adjust the angle of the LCD screen by lifting it. 2 Number of Copies Use this key to make multiple copies. 3 Menu keys: d or c Press to scroll backward or forward to a menu selection.
General information 7 LCD display indications Mode keys: SCAN Lets you access Scan mode. PHOTO CAPTURE 1 The LCD display shows the mode the machine is in, the current settings, and the available ink volume. Lets you access PhotoCapture Center™ mode. 8 1 1 23 Mem. COPY Warning LED Turns orange and blinks when the LCD displays an error or an important status message. Quality Enlarge/Reduce 01 Normal 100% Ratio: Note Most of the illustrations in this User’s Guide show the DCP-J515W.
Chapter 1 Basic Operations 1 The following steps show how to change a setting in the machine. In this example the Paper Type setting is changed from Plain Paper to Inkjet Paper. a b Warning LED indications The Warning LED (light emitting diode) is a light that shows the status of the machine, as shown in the table. Press Menu. Press a or b to choose General Setup.
General information LCD display Setting the backlight brightness 1 1 1 If you are having difficulty reading the LCD, try changing the brightness setting. a b Press Menu. Press a or b to choose General Setup. Press OK. c Press a or b to choose LCD Settings. Press OK. d e Press a or b to choose Backlight. f Press d or c to choose Light, Med or Dark. Press OK. Press Stop/Exit.
2 Loading paper Loading paper and other print media Note To print on Photo (10 15 cm) or Photo L (89 127 mm) paper, you must use the photo paper tray. (See Loading photo paper on page 12.) a 2 c 2 With both hands, gently press and slide the paper side guides (1) and then the paper length guide (2) to fit the paper size. Make sure that the triangular marks (3) on the paper side guides (1) and paper length guide (2) line up with the marks for the paper size you are using.
Loading paper e Note When you use Legal size paper, press and hold the universal guide release button (1) as you slide out the front of the paper tray. Gently put the paper into the paper tray print side down and top edge in first. Check that the paper is flat in the tray. 2 1 IMPORTANT Be careful that you do not push the paper in too far; it may lift at the back of the tray and cause feed problems. d Fan the stack of paper well to avoid paper jams and misfeeds.
Chapter 2 g Close the output paper tray cover. Loading envelopes and postcards 2 About envelopes 2 Use envelopes that weigh between 80 to 95 g/m2. Some envelopes need margin settings to be set in the application. Make sure you do a test print first before printing many envelopes. h Slowly push the paper tray completely into the machine. IMPORTANT DO NOT use any of the following types of envelopes, as they will cause paper feed problems: • That are of a baggy construction.
Loading paper How to load envelopes and postcards a Before loading, press the corners and sides of envelopes or postcards to make them as flat as possible. IMPORTANT If envelopes or postcards are “double-feeding”, put one envelope or postcard in the paper tray at a time. 2 b Put envelopes or postcards in the paper tray with the address side down and the leading edge (top of the envelopes) in first.
Chapter 2 If you have problems printing on envelopes with the flap on the short edge, try the following suggestions: a b Open the envelope flap. Put the envelope into the paper tray with the address side down and the flap positioned as shown in the illustration. Loading photo paper 2 Use the photo paper tray which has been assembled on the top of the output paper tray cover to print on Photo (10 15 cm) and Photo L (89 127 mm) size paper.
Loading paper b Press and slide the paper side guides (1) and paper length guide (2) to fit the paper size. 1 d When you have finished printing photos return the photo paper tray to the Normal printing position. Squeeze the blue photo paper tray release button (1) using your right index finger and thumb and pull the photo paper tray back until it clicks (2). 1 2 c 2 Put the photo paper into the photo paper tray and gently adjust the paper side guides to the paper.
Chapter 2 IMPORTANT If you do not return the photo paper tray to the Normal printing position after printing photos, you will get a No Paper Fed error when you use standard paper. Photo paper tray in the normal printing position Photo paper tray in the photo printing position 14 Removing small printouts from the machine When the machine ejects small paper onto the output paper tray cover you may not be able to reach it.
Loading paper Printable area 2 The printable area depends on the settings in the application you are using. The figures below show the unprintable areas on cut sheet paper and envelopes. The machine can print in the shaded areas of cut sheet paper when the Borderless print feature is available and turned on. (See Printing for Windows® or Printing and Faxing for Macintosh in the Software User's Guide.
Chapter 2 Paper settings 2 Paper Size To get the best print quality, set the machine for the type of paper you are using. You can use five sizes of paper for printing copies: A4, A5, Letter, Legal and 10 15 cm. When you load a different size of paper in the machine, you will need to change the paper size setting at the same time. a b a b Paper Type c d e Press Menu. Press a or b to choose General Setup. Press OK. Press a or b to choose Paper Type.
Loading paper Acceptable paper and other print media The print quality can be affected by the type of paper you use in the machine. To get the best print quality for the settings you have chosen, always set the Paper Type to match the type of paper you load. You can use plain paper, inkjet paper (coated paper), glossy paper, transparencies and envelopes. We recommend testing various paper types before buying large quantities. For best results, use Brother paper.
Chapter 2 Handling and using print media Paper capacity of the output paper tray cover 2 Store paper in its original packaging, and keep it sealed. Keep the paper flat and away from moisture, direct sunlight and heat. Avoid touching the shiny (coated) side of photo paper. Load photo paper with the shiny side facing down. Avoid touching either side of transparencies because they absorb water and perspiration easily, and this may cause decreased output quality.
Loading paper Choosing the right print media 2 Paper type and size for each operation Paper Type Cut Sheet Cards Envelopes Transparencies Paper Size 2 2 Usage Copy Photo Capture Printer A4 210 297 mm (8.3 11.7 in.) Yes Yes Yes Letter 215.9 279.4 mm (8 1/2 11 in.) Yes Yes Yes Legal 215.9 355.6 mm (8 1/2 14 in.) Yes – Yes Executive 184 267 mm (7 1/4 10 1/2 in.) – – Yes JIS B5 182 257 mm (7.2 10.1 in.) – – Yes A5 148 210 mm (5.8 8.3 in.
Chapter 2 Paper weight, thickness and capacity 2 Paper Type Weight Thickness No. of sheets Cut Sheet Plain Paper 64 to 120 g/m2 0.08 to 0.15 mm 100 1 Inkjet Paper 64 to 200 g/m2 0.08 to 0.25 mm 20 Glossy Paper Up to 220 g/m2 Up to 0.25 mm 20 2 3 Photo Card Up to 220 g/m2 Up to 0.25 mm 20 2 3 Index Card Up to 120 g/m2 Up to 0.15 mm 30 Postcard Up to 200 g/m2 Up to 0.25 mm 30 Envelopes 75 to 95 g/m2 Up to 0.
3 Loading documents How to load documents Make sure documents written with ink are completely dry. 3 You can make copies and scan from the ADF (automatic document feeder) and from the scanner glass. Using the ADF (DCP-J715W only) 3 The ADF can hold up to 15 pages and feeds each sheet individually. Use standard 80 g/m2 paper and always fan the pages before putting them in the ADF. Document Sizes Supported Paper: 80 g/m2 A4 Length: 148 to 355.6 mm Width: 148 to 215.
Chapter 3 How to load documents Note To use the scanner glass, the ADF must be empty. (DCP-J715W only) a b 3 Scannable area 3 The scannable area depends on the settings in the application you are using. The figures below show unscannable areas. Lift the document cover. 3 4 1 Using the document guidelines on the left and top, place the document face down in the upper left corner of the scanner glass.
4 Making copies How to copy 4 Do one of the following to load your document: Paper Type Paper Size Load your document face down on the scanner glass. (See Using the scanner glass on page 21.) (Advanced User’s Guide) For details about changing the following copy settings, see chapter 3: Press + or - repeatedly until the number of copies you want appears (up to 99).
Chapter 4 Paper options Paper Type 4 4 If you are copying on special paper, set the machine for the type of paper you are using to get the best print quality. a b c d e Load your document. Enter the number of copies you want. Press a or b to choose Paper Type. Press d or c to choose Plain Paper, Inkjet Paper, Brother BP71, Brother BP61, Other Glossy or Transparency. Press OK. If you do not want to change additional settings, press Mono Start or Colour Start.
5 Printing photos from a memory card or USB Flash memory drive PhotoCapture Center™ Operations 5 5 Note USB Flash memory is not available for DCP-J515W model. Even if your machine is not connected to your computer, you can print photos directly from digital camera media or a USB Flash memory drive. (See Print Images on page 28.) 5 You can scan documents and save them directly to a memory card or USB Flash memory drive. (See How to scan to a memory card or USB Flash memory drive on page 29.
Chapter 5 Getting started 5 Firmly put a memory card or USB Flash memory drive into the correct slot. 2 1 1 USB Flash memory drive (DCP-J715W only) IMPORTANT The USB direct interface supports only a USB Flash memory drive, a PictBridge compatible camera, or a digital camera that uses the USB mass storage standard. Any other USB devices are not supported.
Printing photos from a memory card or USB Flash memory drive PHOTO CAPTURE key indications: PHOTO CAPTURE light is on, the memory card or USB Flash memory drive is correctly inserted. 5 PHOTO CAPTURE light is off, the memory card or USB Flash memory drive is not correctly inserted. PHOTO CAPTURE light is blinking, the memory card or USB Flash memory drive is being read or written to.
Chapter 5 Print Images View Photos 5 5 You can preview your photos on the LCD before you print them. If your photos are large files there may be a delay before each photo is displayed on the LCD. a Make sure you have put the memory card or USB Flash memory drive in the correct slot. Press (PHOTO CAPTURE). b Press a or b to choose View Photo(s). Press OK. c d Press d or c to choose your photo. e Repeat steps c and d until you have chosen all the photos.
Printing photos from a memory card or USB Flash memory drive How to scan to a memory card or USB Flash memory drive You can scan monochrome and colour documents into a memory card or USB Flash memory drive. Monochrome documents will be stored in PDF (*.PDF) or TIFF (*.TIF) file formats. Colour documents may be stored in PDF (*.PDF) or JPEG (*.JPG) file formats. The factory setting is Color 150 and the default file format is PDF. The machine automatically creates file names based on the current date.
Chapter 5 j The file name is set automatically; however, you can set a name of your choice using the a, b, d or c keys. Press a or b to choose File Name. Press OK. Enter the new name. (See Entering Text on page 68.) You can only change the first 6 characters. Press a, b, d or c to select OK , and press OK. k Press Mono Start or Colour Start. Note You can place multiple documents on the scanner glass and scan them as separate files. (See Auto Crop in chapter 4 in the Advanced User’s Guide.
6 How to print from a computer Printing a document 6 6 The machine can receive data from your computer and print it. To print from a computer, install the printer driver. (See Printing for Windows® or Printing and Faxing for Macintosh in the Software User’s Guide for the details about the print settings.) a Install the Brother printer driver on the Installation CD-ROM. (See the Quick Setup Guide.) b From your application, choose the Print command.
7 How to scan to a computer Scanning a document There are several ways to scan documents. You can use the SCAN key on the machine or the scanner drivers on your computer. a To use the machine as a scanner, install a scanner driver. If the machine is on a Network, configure it with a TCP/IP address. 7 Scanning using the scan key a b Choose the scan mode you want. Scan to Media Scan to E-mail Scan to OCR 1 Scan to Image 1 Load your document. (See Loading documents on page 21.
A Routine maintenance Replacing the ink cartridges Your machine is equipped with an ink dot counter. The ink dot counter automatically monitors the level of ink in each of the 4 cartridges. When the machine detects an ink cartridge is running out of ink, the machine will tell you with a message on the LCD. A a Open the ink cartridge cover. If one or more ink cartridges have reached the end of their life, the LCD shows B&W Print Only or Cannot Print.
d Turn the green knob on the protective yellow cap clockwise until it clicks to release the vacuum seal, then remove the cap (1). f Gently push the ink cartridge in until it clicks, and then close the ink cartridge cover. g The machine will automatically reset the ink dot counter. 1 Note e Each colour has its own correct position. Insert the ink cartridge in the direction of the arrow on the label.
Routine maintenance IMPORTANT • DO NOT take out ink cartridges if you do not need to replace them. If you do so, it may reduce the ink quantity and the machine will not know the quantity of ink left in the cartridge. • DO NOT touch the cartridge insertion slots. If you do so, the ink may stain your skin. • If ink gets on your skin or clothing immediately wash it off with soap or detergent. Cleaning and checking the machine Cleaning the scanner glass a A A Lift the document cover (1).
b (DCP-J715W only) In the ADF unit, clean the white bar (1) and the glass strip (2) with a lint-free cloth moistened with a non-flammable glass cleaner. 1 Cleaning the paper pick-up rollers a Pull the paper tray completely out of the machine. b Unplug the machine from the electrical socket and open the Jam Clear Cover (1) at the back of the machine.
Routine maintenance Cleaning the print head To maintain good print quality, the machine will automatically clean the print head when needed. You can start the cleaning process manually if there is a print quality problem. Clean the print head and ink cartridges if you get a horizontal line in the text or graphics, or blank text on your printed pages. You can clean Black only, three colours at a time (Cyan/Magenta/Yellow), or all four colours at once. Cleaning the print head consumes ink.
j k After cleaning is finished, press Colour Start. The machine starts printing the Print Quality Check Sheet again. Return to step f. Press Stop/Exit. If you repeat this procedure at least five times and the print quality is still poor, replace the ink cartridge for the clogged colour. After replacing the ink cartridge, check the print quality. If the problem still exists, repeat the cleaning and test print procedures at least five times for the new ink cartridge.
B Troubleshooting B Error and Maintenance messages B As with any sophisticated office product, errors may occur and consumable items may need to be replaced. If this happens, your machine identifies the error and shows an error message. The most common error and maintenance messages are shown below. You can correct most errors and routine maintenance by yourself. If you need more help, the Brother Solutions Center offers the latest FAQs and troubleshooting tips. Visit us at http://solutions.brother.
Error Message Cause Action Cannot Detect You installed a new ink cartridge too quickly and the machine did not detect it. Take out the new ink cartridge and re-install it slowly. If you are using non Brother Original ink the machine may not detect the ink cartridge. Replace the cartridge with a Brother Original ink cartridge. If the error message remains, contact your Brother dealer. An ink cartridge is not installed correctly.
Troubleshooting Error Message Cause Action Ink Absorber NearFull The ink absorber box or flushing box is near full. Call Brother Customer Service / your Brother dealer. Ink low One or more of the ink cartridges are near the end of their life. Order a new ink cartridge. Low Temperature The print head is too cold. Allow the machine to warm up. Media Error The memory card is either corrupted, incorrectly formatted, or there is a problem with the memory card.
Error Message Cause Action Out of Memory The machine's memory is full. Copy operation in progress: Press Stop/Exit and wait until the other operations in progress finish and then try again. The memory card or USB Flash memory drive you are using does not have enough free space to scan the documents. Paper Jam Delete unused files from your memory card or USB Flash memory drive to make some free space and then try again. Paper is jammed in the machine.
Troubleshooting Error animation B Error animations display step-by-step instructions when paper gets jammed. You can read the steps at your own pace by pressing c to see the next step and d to go backward. Document jam (DCP-J715W only) Document is jammed inside the ADF unit a Take out any paper from the ADF that is not jammed. b c Lift the document cover. d e Close the document cover. B Pull the jammed document out to the left.
Printer jam or paper jam B c Close the Jam Clear Cover. Make sure the cover is closed correctly. d If the paper support flap is open, close it, and then close the paper support. Pull the paper tray completely out of the machine. e Pull out the jammed paper (1). Take out the jammed paper depending on where it is jammed in the machine. a Unplug the machine from the electrical socket. b Open the Jam Clear Cover (1) at the back of the machine. Pull the jammed paper out of the machine.
Troubleshooting f Using both hands, grasp the plastic tabs on both sides of the machine and lift the scanner cover (1) until it locks securely in the open position. g Lift the scanner cover to release the lock ( ). Gently push the scanner cover support down ( ) and close the scanner cover ( ) using both hands. 1 1 2 Move the print head (if necessary) to take out any paper remaining in this area. Make sure that jammed paper is not left in the corners of the machine.
Troubleshooting B If you think there is a problem with your machine, check the chart below and follow the troubleshooting tips. Most problems can be easily resolved by yourself. If you need additional help, the Brother Solutions Center offers the latest FAQs and troubleshooting tips. Visit us at http://solutions.brother.com/ If you are having difficulty with your machine Printing Difficulty Suggestions No printout Check the interface cable on both the machine and your computer.
Troubleshooting Printing (continued) Difficulty Suggestions White horizontal lines appear in text or graphics. Clean the print head. (See Cleaning the print head on page 37.) Make sure you are using Brother Original Innobella™ ink. Try using the correct types of paper. (See Acceptable paper and other print media on page 17.) If you want to print on Photo 10 15 cm or Photo L 89 127 mm paper, make sure you use the photo paper tray. (See Loading photo paper on page 12.) The machine prints blank pages.
Printing (continued) Difficulty Suggestions Photo paper does not feed correctly. When you print on Brother Photo paper, load one extra sheet of the same photo paper in the paper tray. An extra sheet has been included in the paper package for this purpose. Clean the paper pick-up rollers. (See Cleaning the paper pick-up rollers on page 36.) Machine feeds multiple pages. Make sure the paper is loaded correctly in the paper tray. (See Loading paper and other print media on page 8.
Troubleshooting Software Difficulties Difficulty Suggestions Cannot install software or print. (Windows® users only) Run the Repair MFL-Pro Suite program on the Installation CD-ROM. This program will repair and reinstall the software. “Device Busy” Make sure the machine is not showing an error message on the LCD. Cannot print images from FaceFilter Studio. To use FaceFilter Studio, you must install the FaceFilter Studio application from the Installation CD-ROM supplied with your machine.
Network Difficulties Difficulty Suggestions Cannot print over the Network. Make sure that your machine is powered on and is online and in Ready mode. Print a Network Configuration list (see Printing Reports in chapter 2 in the Advanced User’s Guide) and check the current Network settings printed in this list. (DCP-J715W only) Reconnect the LAN cable to the hub to verify that the cabling and network connections are good.
Troubleshooting Machine Information Checking the serial number B B You can see the machine’s serial number on the LCD. a b How to reset the machine a b B Press Menu. Press a or b to choose Initial Setup. Press OK. Press Menu. c Press a or b to choose Machine Info. Press OK. Press a or b to choose Reset. Press OK. d Press a or b to choose the type of reset you want to use. Press OK. Press + to confirm. e Press + to reboot the machine. c Press a or b to choose Serial No. Press OK.
C Menu and features On-screen programming Your machine is designed to be easy to operate with LCD on-screen programming using the menu keys. User-friendly programming helps you take full advantage of all the menu selections your machine has to offer. Since your programming is done on the LCD, we have created step-by-step on-screen instructions to help you program your machine. All you need to do is follow the instructions as they guide you through the menu selections and programming options.
Menu and features Menu table C The menu table will help you understand the menu selections and options that are found in the machine's programs. The factory settings are shown in Bold with an asterisk. Menu ( ) C Level1 Level2 Level3 Options Descriptions Page Ink Management Test Print — Print Quality Lets you check the print quality or alignment. 37 Lets you clean the print head.
Level1 Level2 Level3 Options Descriptions Page General Setup Sleep Mode — 1Min You can choose how long the machine must be idle before it goes into sleep mode. See 1. (Continued) 2Mins 3Mins 5Mins* 10Mins 30Mins 60Mins 1 See Advanced User’s Guide. The factory settings are shown in Bold with an asterisk. Network menu (DCP-J515W) C Level1 Level2 Level3 Options Descriptions Network TCP/IP BOOT Method Auto* Chooses the BOOT method that best suits your needs.
Menu and features Level1 Level2 Level3 Options Descriptions Network TCP/IP WINS Server (Primary) (Continued) (Continued) Specifies the IP address of the primary or secondary server. 000.000.000.000 (Secondary) 000.000.000.000 DNS Server (Primary) 000.000.000.000 Specifies the IP address of the primary or secondary server. (Secondary) 000.000.000.000 APIPA On* Off Automatically allocates the IP address from the link-local address range.
Network menu (DCP-J715W) C Level1 Level2 Level3 Level4 Options Descriptions Network Wired LAN TCP/IP BOOT Method Auto* Chooses the BOOT method that best suits your needs. Static RARP BOOTP DHCP IP Address [000-255]. [000-255]. Enter the IP address. [000-255]. [000-255] Subnet Mask [000-255]. [000-255]. Enter the Subnet mask. [000-255]. [000-255] Gateway [000-255]. [000-255]. Enter the Gateway address. [000-255]. [000-255] Node Name BRNXXXXXXXXXXXX Enter the Node name.
Menu and features Level1 Level2 Level3 Level4 Options Descriptions Network Wired LAN Ethernet — Auto* (Continued) (Continued) Chooses the Ethernet link mode. 100B-FD 100B-HD 10B-FD 10B-HD WLAN MAC Address — — You can see your machine’s Mac address from the control panel. TCP/IP BOOT Method Auto* Chooses the BOOT method that best suits your needs. Static RARP BOOTP DHCP IP Address [000-255]. [000-255]. Enter the IP address. [000-255]. [000-255] Subnet Mask [000-255]. [000-255].
Level1 Level2 Level3 Level4 Options Descriptions Network WLAN TCP/IP APIPA On* (Continued) (Continued) (Continued) Automatically allocates the IP address from the link-local address range. Network I/F Off Setup Wizard — — You can manually configure your print server for a wireless network. WPS/AOSS — — You can easily configure your wireless network settings using the one-button push method.
Menu and features Menu ( ) (continued) C Level1 Level2 Level3 Options Descriptions Page Print Reports Help List — — See 1. User Settings — — You can print these lists and reports. Network Config — — WLAN Report — — Machine Info. Serial No. — — Lets you check the serial number of your machine. 51 Initial Setup Date&Time — — Puts the date and time in your machine. See 2.
Copy (Default display) C Level1 Level2 Level3 Options Descriptions Page Quality — — Fast Choose the Copy resolution for your type of document. See 1. Normal* Best Enlarge/Reduce 100%* — — — Enlarge — 142% A5iA4 You can choose the enlargement ratio for the next copy. 186% 10x15cmiLTR 198% 10x15cmiA4 Reduce — 47% A4i10x15cm 69% A4iA5 You can choose the reduction ratio for the next copy.
Menu and features Level1 Level2 Level3 Density — — Ink Save Mode — — Options On Descriptions Page Adjusts the density of copies. See 1. You can save some ink. Off* Stack/Sort — — (DCP-J715W only) Page Layout Stack* Sort — — Off(1 in 1)* 2 in 1 (P) You can choose to stack or sort multiple copies. You can make N in 1 or Poster copies.
Watermark Copy Settings C Option1 Option2 Option3 Option4 Descriptions Page Template — Text CONFIDENTIAL* Places a text into your document as a Watermark using a template. See 1. DRAFT COPY Position A B C D E* F G H I Pattern Size Small Medium* Large Angle -90 -45°* 0 45 90 Transparency -2 -1 0* +1 +2 Colour Red Orange Yellow Blue Green Purple Black* Apply 1 — See Advanced User’s Guide. The factory settings are shown in Bold with an asterisk.
Menu and features Option1 Option2 Option3 Option4 Descriptions Page Media (Select image from media) Position A Places a logo or text into your document as a Watermark using an image from removable media. See 1. B C D E* F G H I Pattern Size Small Medium* Large Angle -90 -45°* 0 45 90 Transparency -2 -1 0* C +1 +2 Scan (Set page and press Start) Apply — Transparency -2 -1 0* Places a logo or text into your document as a Watermark using a scanned image.
PHOTO CAPTURE ( ) C Level1 Level2 Level3 Options Descriptions Page View Photo(s) — — See the print settings in the following table. You can preview your photos on the LCD. 28 Print Index Layout Format — 6 Images/Line* You can print a thumbnail page. See 1. 5 Images/Line Paper Type Plain Paper* Inkjet Paper Brother BP71 Brother BP61 Other Glossy Paper Size A4* Letter Print Photos — — Enhance Photos Auto Correct — See the print settings in the following table.
Menu and features Print Settings C Option1 Option2 Option3 Option4 Descriptions Page Print Quality Normal — — Choose the print quality. See 1. (Does not appear for DPOF printing.) Photo* Paper Type Plain Paper — — Choose the paper type. (When Letter or A4 is chosen) — Choose the paper and print size. — — Adjusts the brightness. — — Adjusts the contrast.
Option1 Option2 Option3 Color Enhance On White Balance (Does not appear when Enhance Photos is chosen.) Off* Option4 +2 +1 Descriptions Page Adjusts the hue of the white areas. See 1. -1 -2 Sharpness +2 +1 Enhances the detail of the image. -1 -2 Color Density +2 +1 Adjusts the total amount of colour in the image. -1 -2 Cropping On* — — Crops the image around the margin to fit the paper size or print size.
Menu and features SCAN ( ) C Level1 Option1 Option2 Option3 Descriptions Page Scan to File — — — You can scan a monochrome or a colour document into your computer. See 1 . Scan to Media Quality — Color 150* You can choose the scan resolution and file format for your document. 29 Scan multiple documents placed on the scanner glass to a memory card or USB Flash memory drive one at a time. See 2 . (When a memory card or USB Flash memory drive is inserted.
Entering Text C Press a, b, d or c to select numbers or characters you want to choose, and press OK repeatedly until the file name is complete. Press a, b, d or c to select OK , and press OK. Scan to Media Complete OK File Name 010110 0 A K U 1 2 3 4 5 B C D E F L M N O P V W X Y Z 6 7 8 G H I Q R S 9 J T OK Inserting special characters To enter special characters, press a, b, d or c to select C , and press OK.
D Specifications D General D Printer Type Inkjet Print Method Mono: Piezo with 94 1 nozzle Colour: Piezo with 94 3 nozzles Memory Capacity 40 MB LCD (Liquid Crystal Display) Wide 3.3 in. (82.79 mm) TFT Colour LCD Power Source AC 220 to 240V 50/60Hz Power Consumption 1 (DCP-J515W) Copying Mode: Approx. 17 W 2 Standby Mode: Approx. 3.5 W Sleep Mode: Approx. 2 W Off: Approx. 0.5 W (DCP-J715W) Copying Mode: Approx. 17 W 3 Standby Mode: Approx. 6 W Sleep Mode: Approx. 3.
Dimensions (DCP-J515W) 368 mm 150 mm 360 mm 450 mm 390 mm (DCP-J715W) 375 mm 180 mm 390 mm 405 mm Weight 370 mm 460 mm (DCP-J515W) 6.9 kg (DCP-J715W) 7.5 kg Noise Operating: LPA m = 50 dB (A) or less 1 Noise per ISO9296 Operating: LWAd = 62.3 dB (A) (Mono) LWAd = 56.7 dB (A) (Colour) Office equipment with LWAd > 63.0 dB (A) is not suitable for use in rooms where people do primarily intellectual work. Such equipment should be placed in separate rooms because of the noise emission.
Specifications Print media Paper Input D Paper Tray Paper type: Plain paper, inkjet paper (coated paper), glossy paper 1, transparencies 1 2 and envelopes Paper size: A4, Legal, Executive, Letter, A5, A6, JIS B5, envelopes (commercial No.10, DL, C5, Monarch, JE4), Photo 10 15 cm, Photo 2L 13 18 cm, Index card and Postcard 3 Width: 98 mm - 215.9 mm Length: 148 mm - 355.6 mm For more details, see Paper weight, thickness and capacity on page 20. Maximum paper tray capacity: Approx.
Copy D Colour/Monochrome Yes/Yes Copy Width Max.
Specifications PhotoCapture Center™ Compatible Media 1 D Memory Stick™ (16 MB - 128 MB) Memory Stick PRO™ (256 MB - 16 GB) Memory Stick Duo™ (16 MB - 128 MB) Memory Stick PRO Duo™ (256 MB - 16 GB) Memory Stick Micro™ (M2™) with adapter SD (16 MB to 2 GB) SDHC (4 GB to 16 GB) microSD with adapter miniSD with adapter USB Flash memory drive 2 (DCP-J715W only) Resolution Up to 1200 2400 dpi File Extension DPOF (ver.1.0, ver.1.1), Exif DCF (up to ver.2.
PictBridge (DCP-J715W only) Compatibility Supports the Camera & Imaging Products Association PictBridge standard CIPA DC-001. Visit http://www.cipa.jp/pictbridge for more information.
Specifications Scanner D Colour/Monochrome Yes/Yes TWAIN Compliant Yes (Windows® 2000 Professional/Windows® XP/ Windows® XP Professional x64 Edition/Windows Vista®/ Windows® 7) Mac OS X 10.4.11 - 10.5.x - 10.6.x 1 WIA Compliant Yes (Windows® XP 2/Windows Vista®/Windows® 7) ICA Compliant Yes (Mac OS X 10.6.
Printer D Resolution Up to 1200 6000 dpi Printing Width 204 mm [210 mm (borderless) 1] 3 Borderless A4, Letter, A6, Photo 10 15 cm, Index Card 127 203 mm, Photo L 89 127 mm, Photo 2L 13 18 cm, Postcard 1 100 148 mm 2 1 When you set the Borderless feature to On. 2 See Paper type and size for each operation on page 19. 3 When printing on A4 size paper.
Specifications Interfaces USB 1 2 D Use a USB 2.0 interface cable that is no longer than 2 m. LAN cable 3 (DCP-J715W only) Use an Ethernet UTP cable category 5 or greater. Wireless LAN IEEE 802.11b/g (Infrastructure/Ad-hoc Mode) 1 Your machine has a Hi-Speed USB 2.0 interface (DCP-J715W only). The machine can also be connected to a computer that has a USB 1.1 interface. 2 Third party USB ports are not supported.
Computer requirements D SUPPORTED OPERATING SYSTEMS AND SOFTWARE FUNCTIONS Computer Platform & Operating System Version Windows® Operating System 1 Windows® 2000 Professional 4 Windows® XP Home 2 4 Windows® XP Professional 2 4 Supported PC Software Functions PC Interface Processor Minimum Speed Printing, USB, Intel® Pentium® II Scanning, 10/100 or equivalent Removable Base-TX (Ethernet) Disk 5 (DCP-J715W) Windows Vista® 2 Intel® Pentium® 4 or equivalent Windows® 7 2 (Intel®64 64-bit or AMD64) su
Specifications Consumable items D Ink The machine uses individual Black, Yellow, Cyan and Magenta ink cartridges that are separate from the print head assembly. Service Life of Ink Cartridge The first time you install a set of ink cartridges the machine will use an amount of ink to fill the ink delivery tubes for high quality printouts. This process will only happen once. After this process is complete the cartridges provided with your machine will have a lower yield than standard cartridges (65%).
Network (LAN) D Note For details about the full Network specifications, see the Network User’s Guide. LAN You can connect your machine to a network for Network Printing, Network Scanning and access photos from PhotoCapture Center™ 1. Also included is Brother BRAdmin Light 2 Network Management software. Wireless Network Security SSID (32 chr), WEP 64/128 bit, WPA-PSK (TKIP/AES), WPA2-PSK (AES) Setup Support Utility AOSS™ Yes WPS Yes 1 See the Computer Requirements chart on page 78.
E Index A G ADF (automatic document feeder) ...........21 Apple Macintosh See Software User's Guide. Greyscale ................................................ 75 C Help LCD messages ..................................... 52 Menu Table .......................................... 53 Cleaning paper pick-up roller ...............................36 print head ..............................................37 scanner .................................................35 Consumable items ......................
O R On/Off key ..................................................4 Out of Memory message ..........................42 Resolution copy ...................................................... 72 print ...................................................... 76 scan ...................................................... 75 P Paper ................................................ 17, 71 capacity .................................................20 loading .......................................
Visit us on the World Wide Web http://www.brother.com This machine is approved for use in the country of purchase only. Local Brother companies or their dealers will only support machines purchased in their own countries.
