Installation Instructions

NOTE
• MostoftheillustrationsinthisQuick Setup Guideshowthe
MFC-J491DW.
• Saveallpackingmaterialsandtheboxincaseyoumustshipyour
machine.
• You must purchase the correct interface cable for the
interface you want to use.
USB cable
WerecommendusingaUSB2.0cable(TypeA/B)thatisnomore
than2metreslong.
2
Load paper in the paper tray
1
Unpack the machine and check the components
Thecomponentsincludedintheboxmaydifferdependingonyourcountry.
Removetheprotectivetapeandfilmcoveringthemachine.
FollowthestepsontheLCD
tounpackandinstalltheink
cartridges.
Themachinewillpreparetheink
tubesystemforprinting.
Whenthemachinehasfinishedtheinitialcleaning
process,followthestepsontheLCDtoconfigure
themachine’ssettings.
• Checkprintquality
• SetFirmwareUpdatedefaults
• Printtheinstallationsheet
Opentheinkcartridgecover,andthen
removetheorangeprotectivepart
fromthemachine.
Afterturningthemachineon,youmayneedtosetyour
countryorlanguage(dependingonyourmachine).
Ifrequired,followthetouchscreeninstructions.
NOTE
Youcanadjustthecontrolpanelangletoreadthe
LCDmoreeasily.
NOTE
Donotthrowawaytheorangeprotectivepart.
Youwillneeditifyoutransportthemachine.
QuickSetupGuide
DCP-J572DW / MFC-J491DW / MFC-J497DW
ReadtheProduct Safety Guidefirst,thenreadthisQuick Setup Guide
forthecorrectinstallationprocedure.
3
Connect the power cord
6
Install the inbox ink cartridges
4
Select your country
or language
(Initial setup only)
7
Machine settings
D0141W001-00
UK
VersionB
Inbox Ink Cartridges*
• Black
• Yellow
• Cyan
• Magenta
*
Inkcartridgescontain
approximatelythesamepage
yieldasreplacementcartridges
(Standard).
Quick Setup Guide
Product Safety Guide
Power Cord
(for UK) (for others)
Brother Installation Disc Telephone Line Cord
(MFC models only)
1. PressSettings.
2. Pressaorbtoselectthefollowing:
a.Select[Initial Setup],andthenpressOK.
b.Select[Local Language],andthenpressOK.
c.Selectyourlanguage,andthenpressOK.
3. PressStop/Exit.
8
Select your language
(if needed and only for
certain models)
9
Connect the telephone line cord (MFC models only)
Ifyouarenotusingyourmachineasafax,goto
10
.
Formoreinformationonusingthefaxfeature,seetheOnline User’s Guide.
ThelatestmanualsareavailableattheBrotherSolutionsCenter:
support.brother.com/manuals
WatchourFAQvideosforhelp
withsettingupyourBrother
machine.
support.brother.com/videos
5
Set the date and time
FollowthepromptsdisplayedontheLCDtosetthe
dateandtime.
Quicklyshakejusttheblack
inkcartridgehorizontally
15timesasshown,before
insertingitintothemachine.
Opentheoutputpapertray
covera. Fanthepaperwellandloaditinthetray.
Closetheoutputpapertraycover,and
thenslowlypushthetraycompletely
intothemachine.
Adjustthepaperguides.
NOTE
Pulloutthepapersupporta,andunfold
thepapersupportapbsothatthe
printedpagesdonotfall.
([DPSOHIRU8.
(Example for UK)

Summary of content (2 pages)