User Manual

Table Of Contents
Home > Introduction to Your Brother Machine > Control Panel Overview
Control Panel Overview
Related Models: DCP-L2510D/DCP-L2530DW/DCP-L2537DW/DCP-L2550DN/MFC-L2710DN/MFC-L2710DW
The control panel may vary depending on your model.
>> MFC-L2710DN/MFC-L2710DW
>> DCP-L2510D/DCP-L2530DW/DCP-L2537DW/DCP-L2550DN
MFC-L2710DN/MFC-L2710DW
1 2
4
3
1. One Touch Buttons
Store and recall up to eight fax and telephone numbers.
To access stored One Touch fax and telephone numbers 1-4, press the One Touch button assigned to that
number. To access stored One Touch fax and telephone numbers 5-8, press and hold Shift as you press the
button.
2. Function Buttons
Redial/Pause
Press to dial the last number you called. This button also inserts a pause when programming quick dial
numbers or when dialling a number manually.
Tel/R
Press Tel/R to have a telephone conversation after picking up the external handset during the F/T fast
double-ring.
When connected to a PBX, use this button to gain access to an outside line, to recall an operator, or to
transfer a call to another extension.
WiFi (for wireless models)
Press the WiFi button and launch the wireless installer on your computer. Follow the on-screen
instructions to set up a wireless connection between your machine and your network.
When the WiFi light is on, your Brother machine is connected to a wireless access point. When the WiFi
light blinks, the wireless connection is down, or your machine is in the process of connecting to a wireless
access point.
Resolution (for certain models only)
Press to change the Fax resolution.
2 in 1 (ID) Copy
Press to copy both sides of an identification card onto a single page.
6