User Manual

Level 1 Level 2 Descriptions
LCD Settings Dim Timer
Set how long the LCD backlight stays on after you go back to your Home
screen.
Screen
Settings
Scan Screen
Set the default Scan screen settings.
Ecology Eco Mode
Turn the following machine settings on at the same time.
• 2-sided Print:Long Edge((Available only for certain models))
• Sleep Time:0Min
• Dim Timer:10Secs
Toner Save
Increase the page yield of the toner cartridge.
Sleep Time
Set the number of minutes before the machine enters Sleep mode.
Quiet Mode
Decrease printing noise.
Auto Power Off
Set the number of hours that the machine will remain in Deep Sleep
mode before going into Power Off mode. Choose Off if you do not want
the machine to go into Power Off mode.
Replace Toner
- Set the machine to continue printing after the LCD displays Replace
Toner.
[All Settings] > [Shortcut Settings]
Level 1
Level 2 Descriptions
(Select shortcut button.)
Rename
Change the shortcut name.
Edit
Change the shortcut settings.
Delete
Delete the shortcut.
[All Settings] > [Printer]
Level 1
Level 2 Level 3 Descriptions
Emulation
- - Select the emulation mode.
Print Options Font List HP LaserJet
Print a list of the machine’s internal fonts.
BR-Script 3
Test Print
- Print a test page.
2-sided 2-sided
Print
- Enable or disable 2-sided printing and choose long edge or
short edge.
Single
Image
- For a print job where the last page is a 1-sided image, select
the 1-sided Feed option to reduce printing time.
Auto Continue
- - Select this setting if you want the machine to clear paper size
errors, and to use the paper in the tray.
HP Tray Command
- - Select the correct version of HP LaserJet tray emulation.
Reset Printer
- - Restore the printer settings to the factory settings.
[All Settings] > [Network]
Level 1
Level 2 Level 3 Level 4 Descriptions
Wired LAN TCP/IP BOOT Method
- Select the Boot method that best suits
your needs.
IP Address
- Enter the IP address.
Subnet Mask
- Enter the Subnet mask.
Gateway
- Enter the Gateway address.
604