Operation Manual

5
Make sure the paper is below the
maximum paper mark (b b b).
Overfilling the paper tray will cause
paper jams.
6
Slowly push the paper tray completely
into the machine.
7
Lift the support flap to prevent paper
from sliding off the output tray.
8
Send your print job to the machine.
Change your print preferences in the Print
dialog box before sending the print job
from your computer.
Set the Check Size
Your Brother machine's Check Size setting
causes the machine to display a message
when you remove the paper tray from the
machine, asking if you changed the paper
size.
The default setting is On.
1
Press (Settings) > All
Settings > General Setup > Tray
Setting > Check Size.
2
Press On or Off.
3
Press .
Change the Paper Size
When you change the size of the paper you
load in the tray, you must change the paper
size setting on the LCD at the same time.
1
Press
(Settings) > All
Settings > General Setup > Tray
Setting > Paper Size.
2
Press a or b to display the A4, Letter,
A5, A5(Long Edge), A6, Executive,
Legal or Folio option, and press the
option you want.
3
Press
.
Change the Paper Type
To get the best print quality, set the machine
for the type of paper you are using.
2
Paper Handling
9