Operation Manual
Table Of Contents
- Basic User's Guide DCP-L2560DW/MFC-L2720DW/MFC-L2740DW
- For the Latest Driver Updates
- The Online User's Guide Helps You Get the Most Out of Your Machine
- If you have questions or problems, please take a look at our FAQs.
- Definitions of Notes
- Compilation and Publication Notice
- Table of Contents
- 1 General Information
- 2 Paper Handling
- 3 Print
- 4 Copy
- 5 Scan
- 6 Fax
- A Troubleshooting
- B Appendix
- C Index
Choose the Correct Receive Mode
Related Models:
MFC-L2720DW/MFC-L2740DW
You must choose a Receive Mode depending on the external devices and telephone services
you have on your line.
By default, your machine will automatically receive any faxes that are sent to it. The diagram
below will help you select the correct mode.
Do you want to use the telephone feature of your machine (if
available), an external telephone or external telephone answering
device connected on the same line as the machine?
No
Fax Only Mode
Yes
Are you using the voice message function of an external telephone
answering device?
Yes
External TAD
Mode
No
Do you want the machine to answer fax and telephone calls
automatically?
Yes
Fax/Tel Mode
No
Manual Mode
1
Press (Settings) > All Settings > Fax > Setup Receive > Receive Mode.
(U.K. only) If you cannot change the Receive Mode, make sure the BT Call Sign feature is
set to Off.
2
Press a or b to display the Fax, Fax/Tel, External TAD, or Manual option, and then
press the option you want.
3
Press
.
• Fax and Telephone Problems on page 46
Related Information
32