Owners manual
Table Of Contents
- Basic User's Guide DCP-L5500DN/DCP-L5600DN/DCP-L5650DN/MFC-L5700DW/MFC-L5800DW/MFC-L5850DW/MFC-L5900DW/MFC-L6700DW/MFC-L6800DW
- Brother Numbers
- Ordering Accessories and Supplies
- Order Information
- Notice - Disclaimer of Warranties (USA and Canada)
- For the Latest Driver Updates
- User's Guides and Where to Find Them
- The Online User's Guide Helps You Get the Most Out of Your Machine
- Questions or Problems? Take a Look at our FAQs, Solutions, and Videos Online.
- Definitions of Notes
- Compilation and Publication Notice
- Important Note
- Table of Contents
- 1 General Information
- 2 Paper Handling
- 3 Print
- 4 Copy
- 5 Scan
- 6 Fax
- A Troubleshooting
- B Appendix
- C Index
Paper is Jammed in the MP tray
If the machine's control panel or the Status
Monitor indicates that there is a jam in the
machine's MP tray, follow these steps:
1
Remove the paper from the MP tray.
2
Remove any jammed paper from in and
around the MP tray.
3
Fan the paper stack, and then put it
back in the MP tray.
4
Reload paper in the MP tray and make
sure the paper stays under the
maximum paper height guides (1) on
both sides of the tray.
1
5
Press [Retry] to resume printing.
Paper is Jammed in the Paper Tray
If the machine's control panel or the Status
Monitor indicates that there is a jam in the
paper tray, follow these steps:
1
Pull the paper tray completely out of the
machine.
2
Slowly pull out the jammed paper.
Pulling the jammed paper downward
using both hands allows you to remove
the paper more easily.
A
Troubleshooting
57