Basic User's Guide
Table Of Contents
- Basic User's Guide DCP-L5500DN/DCP-L5600DN/DCP-L5650DN/MFC-L5700DW/MFC-L5800DW/MFC-L5850DW/MFC-L5900DW/MFC-L6700DW/MFC-L6800DW
- Brother Numbers
- Ordering Accessories and Supplies
- Order Information
- Notice - Disclaimer of Warranties (USA and Canada)
- For the Latest Driver Updates
- User's Guides and Where to Find Them
- The Online User's Guide Helps You Get the Most Out of Your Machine
- Questions or Problems? Take a Look at our FAQs, Solutions, and Videos Online.
- Definitions of Notes
- Compilation and Publication Notice
- Important Note
- Table of Contents
- 1 General Information
- 2 Paper Handling
- 3 Print
- 4 Copy
- 5 Scan
- 6 Fax
- A Troubleshooting
- B Appendix
- C Index
How to Navigate the
Touchscreen LCD
Press your finger on the LCD to operate it. To
display and access all the options, swipe left,
right, up, down or press d c or a b on the LCD
to scroll through them.
The following steps explain how to change a
machine setting. In this example, the LCD
Backlight setting is changed from [Light] to
[Med].
IMPORTANT
DO NOT press the LCD with a sharp object,
such as a pen or stylus. It may damage the
machine.
DO NOT touch the LCD immediately after
plugging in the power cord or turning on the
machine. Doing this may cause an error.
NOTE
1
Press [Settings].
2
Press [All Settings].
3
Swipe up or down or press a or b to
display the [General Setup] option,
and then press [General Setup].
4
Swipe up or down or press a or b to
display the [LCD Settings] option,
and then press [LCD Settings].
5
Press [Backlight].
6
Press [Med].
7
Press .
1
General Information
5