Basic User's Guide

Initial Setup
Set the Date and Time
1
Press [Settings] > [All
Settings] > [Initial Setup] >
[Date & Time] > [Date].
2
Enter the last two digits of the year
using the LCD, and then press [OK].
3
Enter the two digits for the month using
the LCD, and then press [OK].
4
Enter the two digits for the day using the
LCD, and then press [OK].
5
Press [Clock Type].
6
Press [12h Clock] or [24h Clock].
7
Press [Time].
8
To enter the time, do one of the
following:
• If you selected [12h Clock] as the
format in the [Clock Type] setting,
enter the time (in 12-hour format)
using the LCD.
Press
to select [AM] or
[PM].
Press [OK].
• If you selected [24h Clock] as the
format in the [Clock Type] setting,
enter the time (in 24-hour format)
using the LCD.
Press [OK].
(For example: enter 19:45 for
7:45 PM.)
9
Press
.
Adjust the Machine's
Volume
1
Press [Settings] > [All
Settings] > [General Setup] >
[Volume].
2
Press one of the following options:
(The options will vary depending on your
machine.)
• [Ring]
Adjust the ring volume.
• [Beep]
Adjust the volume of the beep you
hear when you press a button, make
a mistake, or after you send or
receive a fax.
• [Speaker]
Adjust the speaker volume.
3
Swipe up or down or press a or b to
display the [Off], [Low], [Med] or
[High] option, and then press the
option you want.
4
Press
.
1
General Information
7