Operation Manual
Table Of Contents
- SOFTWARE USER’S GUIDE
- Table of Contents
- Windows®
- 1 Printing
- Using the Brother printer driver
- Features
- Choosing the right type of paper
- Simultaneous printing, scanning and faxing
- Clearing data from the memory
- Status Monitor
- Printer driver settings
- Accessing the printer driver settings
- Basic tab
- Advanced tab
- Support
- Using FaceFilter Studio for photo printing by REALLUSION
- 2 Scanning
- Scanning a document using the TWAIN driver
- Scanning a document using the WIA driver (Windows® XP/Windows Vista®/Windows® 7)
- Scanning a document using the WIA driver (Windows Photo Gallery and Windows Fax and Scan users)
- Using ScanSoft™ PaperPort™11SE with OCR by NUANCE™ (Not available for DCP-J125, DCP-J315W, DCP-J515W, MFC-J220 and MFC-J265W)
- 3 ControlCenter3
- 4 Remote Setup (Not available for DCP models, MFC-J220, MFC-J265W, MFC-J410 and MFC-J415W)
- 5 Brother PC-FAX Software (MFC models only)
- 6 PhotoCapture Center™
- 7 Firewall settings (For Network users)
- 1 Printing
- Apple Macintosh
- 8 Printing and Faxing
- 9 Scanning
- 10 ControlCenter2
- 11 Remote Setup & PhotoCapture Center™
- Using the Scan key
- Index
- brother UK
Printing
24
1
Printing on both sides of the paper 1
The following steps show how you can print on both sides of the paper using the Print Odd Pages and
Print Even Pages settings.
If you want to print a 10 page document on 5 sheets of paper, you must set the printer driver options to print
all odd-numbered pages in reverse order (page 9, 7, 5, 3, 1) first and then even-numbered pages in normal
order (page 2, 4, 6, 8, 10).
a In the printer driver, choose the Basic tab and check Reverse Order.
b Choose the Advanced tab and click Other Print Options.
c Choose Print Order and check Print Odd Pages.
Click OK.
d After the machine prints the odd-numbered pages, remove the printed pages from the output paper tray.
Before you go to the next step, make sure the printed pages are dry.
e Empty the paper tray. Do not add the printed pages to the top of a stack of unprinted paper.
f Make sure the pages are completely flat before putting them back in the paper tray, with the side to be
printed on (the blank side) face down and the top page first.
g In the printer driver, choose the Basic tab and un-check Reverse Order.
h Choose the Advanced tab and click Other Print Options.
i Choose Print Order and check Print Even Pages.
Click OK.
j The machine will print all the even-numbered pages on the other side of the paper.
Guidelines for printing on both sides of the paper 1
If the paper is thin, it may wrinkle.
If the paper is curled, flatten it and then put it back in the paper tray.
If the paper is not feeding properly, it may be curled. Remove the paper and straighten it.
Paper orientation
For Portrait For Landscape