Safety data sheet

MATERIAL SAFETY DATA SHEET Page : 3 of 6
According to EC-directive 2001/58/EC
Product Name Date of last issue: Nov. 7, 2007
TN-2110 / TN-2120 Toner Version number: 1
Section 6 - Accidental release measures
Personal precautions:
Minimize generation of toner dust. Avoid inhalation of the dust.
Environmental precautions:
Prevent from entering into the surface water or sewerage system.
Method of cleaning up:
Sweep the spilt toner or remove it with a vacuum cleaner, and transfer into the sealed container
carefully. Sweep slowly to minimize generation of dust during clean-up. If the vacuum cleaner is
used, the motor must be rated as dust explosion-proof. A conductive hose bonded to the machine
should be used to reduce static build-up. Residue can be removed with soap and cold water.
Clothes may be washed or dry cleaned after removal of loose toner.
See section 13 for disposal considerations.
Section 7 - Handling and storage
Handling:
Keep out of the reach of children. In case of accidental spill, try not to disperse the particles. Avoid
prolonged inhalation of excessive dust and contact eyes. Use with adequate ventilation. Use the
mask that is recommended for the prevention of dust and coarse particulate.
Storage:
Keep out of the reach of children. Keep container tightly closed. Keep away from contact with
oxidizing materials. Store in a cool and dry place away from direct light to maintain quality.
Section 8 - Exposure controls / personal protection
Exposure limit value:
Workplace exposure limit (UK, basis: EH40/2005 ) Ingredients CAS
Number
Long-term exposure limit
(8-hour TWA reference period)
Short-term exposure limit
(15-minute TWA reference period)
Carbon black 1333-86-4 3.5 mg.m
-3
7 mg.m
-3
Silicon Dioxide
(amorphous)
7631-86-9 6 mg.m
-3
(inhalable dust)
2.4 mg.m
-3
(respirable dust)
--
Ventilation:
Good general ventilation should be sufficient under normal use.
Personal protective equipment:
Not required under intended use. For use other than in normal operating procedures (such as in
the event of large spill), the following should be applied:
Eye/face: Safety goggles
Skin: Protective gloves recommended
Respiratory: D
ust mask (Respirator for large spill)