User Manual
Table Of Contents
- User’s Guide DS-620 / DS-720D
- Using the documentation
- Trademarks
- Table of Contents
- 1 General Information
- 2 Installing the Scanner Driver and Scanning Software
- 3 Document Specifications
- 4 Scan Preparation
- 5 Scanning Applications and Settings
- Choosing your scanning software
- Using DSmobileCapture (for Windows®)
- Changing DSmobileCapture scan settings (for Windows®)
- Using DSmobileCapture (for Macintosh)
- Changing DSmobileCapture scan settings (for Macintosh)
- Using Button Manager V2 (for Windows®)
- Scan buttons in the Button Manager V2 Button Panel (for Windows®)
- 6 Scanner Calibration
- 7 Scanner Maintenance
- 8 Troubleshooting
- Appendix A
- Appendix B
Scanning Applications and Settings
27
5
Options settings
Click the Options tab to set some additional image processing settings or calibrate your scanner.
(1) Rotation Degrees Choose the rotation angle from the pop-up list if you want to rotate your scanned
image.
(2) Mirror Select the Mirror check box to reverse your image.
(3) Calibration Calibrate the scanner.
For more information, see Calibration using software (for Macintosh) on page 38.
(4) Default Reset values in this and all other Properties tabs to the original factory settings.
(5) Preview Window Click to preview your image before scanning. This preview image helps you define
your scan area.
When you click Preview, scanning for the preview starts and the scanned image
will appear in the Preview Window. Note that the scanned image is only for the
preview and will not be saved.
(1)
(2)
(3)
(4)
(5)