User Manual

Product Safety Guide
6
CAUTION
Avoid placing the scanner in a high-trafc area. If
you must place it in a high-trafc area, ensure that
the scanner is in a safe location where it cannot be
accidentally knocked over, which could cause injury
to you or others and serious damage to the scanner.
Ensure that cables and cords leading to the scanner
are secured so as not to pose a tripping hazard.
Make sure that no part of the scanner protrudes
from the desk or stand where the scanner is
located. Make sure that the scanner is located on
a at, level, and stable surface free from vibration.
Failure to observe these precautions could cause
the scanner to fall, causing an injury.
DO NOT place the scanner on an unstable or tilted
cart, stand, or table, or on any tilted/slanted surface.
The scanner may fall, causing injury to you and
serious damage to the scanner. There is an added
risk of injury if the scanner glass should break.
Do not place heavy objects on the scanner. It may
cause unbalance and the scanner may fall down.
This may result in injury.
Do not use the scanner in locations where
temperature changes are extreme. The resulting
condensation may result in scanner failure or
malfunction. If condensation forms, wait until it
dries completely before using the scanner again.
IMPORTANT
Servicing the scanner
DO NOT attempt to service the scanner yourself.
Opening or removing covers may expose you
to dangerous voltages and other risks, and may
void your warranty. Contact your Brother dealer or
Brother customer service.
WARNING
If the scanner has been dropped or the casing
has been damaged, there may be the possibility
of an electrical shock or re. Unplug the scanner
from the power source and contact your Brother
dealer or Brother customer service.
If the scanner becomes unusually hot, releases
smoke, generates any strong smells, or if you
accidentally spill any liquid on it, immediately
unplug the scanner from the power source.
Contact your Brother dealer or Brother customer
service.
If the scanner does not operate normally when
the operating instructions are followed, adjust
only those controls that are covered by the
operating instructions. Incorrect adjustment
of other controls may result in damage, and
will often require extensive work by a qualied
technician to restore the scanner to normal
operation.
IMPORTANT
• At the time of purchase, the rechargeable Li-ion
battery is slightly charged so that the operation
of the scanner can be verified; however, the
rechargeable Li-ion battery should be fully charged
via the USB port before the scanner is used.
• If the scanner will not be used for a long period
of time, store it in a location where it is not
exposed to high humidity or high temperatures
(temperatures between 15°C and 25°C and
the humidity between 40% and 60% are
recommended). In order to maintain the efficiency
and life of the rechargeable Li-ion battery, charge it
at least every three months.
• If you notice anything unusual about the
rechargeable Li-ion battery the first time it is used,
for example overheating or rust, DO NOT continue
to use the battery. Contact your Brother dealer or
Brother customer service.
Rechargeable Li-ion
battery (DSmobile
DS-940DW only)