Quick Setup Guide
Table Of Contents
- Quick Setup Guide
- Getting Started
- Table of Contents
- Setting Up the Machine
- 1 Removing the Protective Parts
- 2 Installing the Handset
- 3 Loading Paper
- 4 Installing the Phone Line and Power Cord
- 5 Installing the Ink Cartridges
- 6 Print Quality Check
- 7 Setting the Date and Time
- 8 Setting Your Station ID
- 9 Selecting a Receive Mode (FAX-1840C only)
- 10 Selecting a Receive Mode (FAX-1940CN only)
- 11 Setting Up the Message Center (FAX-1940CN only)
- 12 Selecting Your Language (Canada only)
- 13 Sending in the Product Registration and Test Sheet (USA only)
- 14 Using the FAX as a Printer or for PC-FAX Send
- 15 Using the Network features of the FAX-1940CN
- Replacement Consumables
12
Setting Up the Machine
1
Press Menu/Set.
2
Press 0.
3
Press 0.
4
Select your language (English or French)
by using
▲
or
▼
, and then press Menu/Set.
5
Press Stop/Exit.
1
Fill out the Product Registration and Test
Sheet.
2
Open the document tray (1) and pull out
the extension (2) and then open the
document support (3).
3
Place the sheet face down in the Automatic
Document Feeder.
4
Enter the toll-free fax number:
1-877-268-9575.
5
Press Black Start.
12
Selecting Your
Language (Canada only)
Language:English
13
Sending in the Product
Registration and Test
Sheet (USA only)
Make sure (Fax) is illuminated in
Green.
You will receive a confirmation fax of your
Product Registration.
You can also register your product online
going to http://www.brother.com/registration