User`s guide
Table Of Contents
- USER’S GUIDE FAX-2820/FAX-2920/MFC-7220/MFC-7225N
- APPROVAL INFORMATION
- Compilation and Publication Notice
- Safety precautions
- Quick Reference Guide
- Table of Contents
- 1 Introduction
- 2 Getting started
- Initial setup
- General Setup
- Setting the Mode Timer (FAX-2820 and FAX-2920 only)
- Setting the Mode Timer (MFC-7220 and MFC-7225N only)
- Setting the Paper Type
- Setting the Paper Size
- Setting the Ring Volume
- Setting the Beeper Volume
- Setting the Speaker Volume
- Setting the Clock Change
- Toner Save
- Sleep Time
- Setting the LCD Contrast
- Security
- TX Lock (FAX-2820 and MFC-7220 only)
- Memory Security (FAX-2920 and MFC-7225N only)
- Setting Lock
- 3 Setup Send
- 4 Setup Receive
- 5 Quick-Dial numbers and dialling options
- 6 Remote Fax Options
- 7 Printing reports
- 8 Making copies
- 9 Software and Network Features (MFC-7220 and MFC-7225N only)
- 10 Important information
- 11 Troubleshooting and routine maintenance
- Appendix A
- Telephone Service for Australia
- Telephone Service for New Zealand
- Telephone Service for Some Countries
- Advanced receiving operations
- Connecting an external device to your machine
- Appendix B
- Glossary
- Specifications
- Product description
- General
- Print media
- Copy
- Fax
- Scanner (MFC-7220 and MFC-7225N only)
- Printer
- Interfaces
- Download the optional software from the Brother Web Site (FAX-2820 and FAX-2920 users only)
- Computer requirements
- Consumable items
- Network (LAN) (For MFC-7225N only)
- Optional External Wireless Print/Scan Server (NC-2200w) (For MFC-7220 and MFC-7225N only)
- Optional External Print Server (NC-2100p) (For MFC-7220 only)
- Index
- Remote Retrieval Access card
- brother ARL/ASA/NZ
A - 9
Using a cordless external
handset
If the base unit of the cordless telephone is
connected (see page A-10) and you typically
carry the cordless handset elsewhere, it is
easier to answer calls during the Ring Delay.
Note
Not all brands of cordless phones are
compatible for use with your machine.
Changing the remote codes
If you want to use Remote Activation, you
have to turn on the remote codes. The preset
Fax Receive Code is 51 ( 91 for New
Zealand). The preset Telephone Answer
Code is #51 (#91 for New Zealand). If you
want to, you can replace them with your own
codes.
1
If it is not illuminated in green, press
(Fax).
2
Press Menu/Set, 2, 1, 4.
3
Press
▲
or
▼
to select
On
(or
Off
).
Press Menu/Set.
4
Enter the new Fax Receive Code.
Press Menu/Set.
5
Enter the new Telephone Answer Code.
Press Menu/Set.
6
Press Stop/Exit.
Note
■
If you are always disconnected when
accessing your external TAD remotely, try
changing the Fax Receive Code and
Telephone Answer Code to another
three-digit code using the numbers 0-9,
, #.
■
Remote Codes might not work with some
telephone systems.
4.Remote Code