User`s guide
Table Of Contents
- USER’S GUIDE FAX-2820/FAX-2920/MFC-7220/MFC-7225N
- APPROVAL INFORMATION
- Compilation and Publication Notice
- Safety precautions
- Quick Reference Guide
- Table of Contents
- 1 Introduction
- 2 Getting started
- Initial setup
- General Setup
- Setting the Mode Timer (FAX-2820 and FAX-2920 only)
- Setting the Mode Timer (MFC-7220 and MFC-7225N only)
- Setting the Paper Type
- Setting the Paper Size
- Setting the Ring Volume
- Setting the Beeper Volume
- Setting the Speaker Volume
- Setting the Clock Change
- Toner Save
- Sleep Time
- Setting the LCD Contrast
- Security
- TX Lock (FAX-2820 and MFC-7220 only)
- Memory Security (FAX-2920 and MFC-7225N only)
- Setting Lock
- 3 Setup Send
- 4 Setup Receive
- 5 Quick-Dial numbers and dialling options
- 6 Remote Fax Options
- 7 Printing reports
- 8 Making copies
- 9 Software and Network Features (MFC-7220 and MFC-7225N only)
- 10 Important information
- 11 Troubleshooting and routine maintenance
- Appendix A
- Telephone Service for Australia
- Telephone Service for New Zealand
- Telephone Service for Some Countries
- Advanced receiving operations
- Connecting an external device to your machine
- Appendix B
- Glossary
- Specifications
- Product description
- General
- Print media
- Copy
- Fax
- Scanner (MFC-7220 and MFC-7225N only)
- Printer
- Interfaces
- Download the optional software from the Brother Web Site (FAX-2820 and FAX-2920 users only)
- Computer requirements
- Consumable items
- Network (LAN) (For MFC-7225N only)
- Optional External Wireless Print/Scan Server (NC-2200w) (For MFC-7220 and MFC-7225N only)
- Optional External Print Server (NC-2100p) (For MFC-7220 only)
- Index
- Remote Retrieval Access card
- brother ARL/ASA/NZ
Getting started
2 - 5
2
Setting the Ring Volume
You can turn the ring
Off
or you can select
the ring volume level.
1
Press Menu/Set, 1, 4, 1.
2
Press
▲
or
▼
to select
Low
,
Med
,
High
or
Off
.
Press Menu/Set.
3
Press Stop/Exit.
—OR—
You can adjust the ring volume when your
machine is idle (not being used).
In mode (Fax), press or to
adjust the volume level. Every time you press
these keys, the machine will ring so you can
hear the active setting as the LCD shows it.
The volume changes with each key press.
The new setting will stay until you change it
again.
Setting the Beeper Volume
You can change the beeper volume. The
default setting is
Med
. When the beeper is on,
the machine will beep when you press a key,
make a mistake, or after you sent or received
a fax.
1
Press Menu/Set, 1, 4, 2.
2
Press
▲
or
▼
to select
Low
,
Med
,
High
or
Off
.
Press Menu/Set.
3
Press Stop/Exit.
Setting the Speaker Volume
You can adjust the machine’s one-way
speaker volume.
1
Press Menu/Set, 1, 4, 3.
2
Press
▲
or
▼
to select
Low
,
Med
,
High
or
Off
.
Press Menu/Set.
3
Press Stop/Exit.
1.Ring
▲
▲
2.Beeper
3.Speaker