User`s guide
Table Of Contents
- USER’S GUIDE FAX-2820/FAX-2920/MFC-7220/MFC-7225N
- APPROVAL INFORMATION
- Compilation and Publication Notice
- Safety precautions
- Quick Reference Guide
- Table of Contents
- 1 Introduction
- 2 Getting started
- Initial setup
- General Setup
- Setting the Mode Timer (FAX-2820 and FAX-2920 only)
- Setting the Mode Timer (MFC-7220 and MFC-7225N only)
- Setting the Paper Type
- Setting the Paper Size
- Setting the Ring Volume
- Setting the Beeper Volume
- Setting the Speaker Volume
- Setting the Clock Change
- Toner Save
- Sleep Time
- Setting the LCD Contrast
- Security
- TX Lock (FAX-2820 and MFC-7220 only)
- Memory Security (FAX-2920 and MFC-7225N only)
- Setting Lock
- 3 Setup Send
- 4 Setup Receive
- 5 Quick-Dial numbers and dialling options
- 6 Remote Fax Options
- 7 Printing reports
- 8 Making copies
- 9 Software and Network Features (MFC-7220 and MFC-7225N only)
- 10 Important information
- 11 Troubleshooting and routine maintenance
- Appendix A
- Telephone Service for Australia
- Telephone Service for New Zealand
- Telephone Service for Some Countries
- Advanced receiving operations
- Connecting an external device to your machine
- Appendix B
- Glossary
- Specifications
- Product description
- General
- Print media
- Copy
- Fax
- Scanner (MFC-7220 and MFC-7225N only)
- Printer
- Interfaces
- Download the optional software from the Brother Web Site (FAX-2820 and FAX-2920 users only)
- Computer requirements
- Consumable items
- Network (LAN) (For MFC-7225N only)
- Optional External Wireless Print/Scan Server (NC-2200w) (For MFC-7220 and MFC-7225N only)
- Optional External Print Server (NC-2100p) (For MFC-7220 only)
- Index
- Remote Retrieval Access card
- brother ARL/ASA/NZ
Chapter 3
3 - 3
Fax Redial
If you are sending a fax manually and the line
is busy, press Redial/Pause, and then press
Start to try again. If you want to make a
second call to the last number dialled, you
can save time by pressing Redial/Pause and
Start.
Redial/Pause only works if you dialled from
the control panel.
If you are sending a fax automatically and the
line is busy, the machine will automatically
redial up to three times at five minute
intervals.
How to Fax
Automatic transmission
This is the easiest way to send a fax.
Press Start immediately after dialling. (For an
example of automatic faxing, follow the steps
in Faxing from the ADF on this page.)
Faxing from the ADF
1
If it is not illuminated in green, press
(Fax).
2
Put the document face down in the ADF.
3
Dial the fax number.
Press Start. The machine starts
scanning the document.
Manual transmission
Manual transmission lets you hear the
dialling, ringing and fax-receiving tones while
sending a fax.
1
If it is not illuminated in green, press
(Fax).
2
Load your document.
3
Pick up the handset and listen for a dial
tone.
4
Dial the fax number you want to call.
5
When you hear the fax tone, press
Start.
6
Replace the handset.