User`s guide
Table Of Contents
- USER’S GUIDE FAX-2820/FAX-2920/MFC-7220/MFC-7225N
- APPROVAL INFORMATION
- Compilation and Publication Notice
- Safety precautions
- Quick Reference Guide
- Table of Contents
- 1 Introduction
- 2 Getting started
- Initial setup
- General Setup
- Setting the Mode Timer (FAX-2820 and FAX-2920 only)
- Setting the Mode Timer (MFC-7220 and MFC-7225N only)
- Setting the Paper Type
- Setting the Paper Size
- Setting the Ring Volume
- Setting the Beeper Volume
- Setting the Speaker Volume
- Setting the Clock Change
- Toner Save
- Sleep Time
- Setting the LCD Contrast
- Security
- TX Lock (FAX-2820 and MFC-7220 only)
- Memory Security (FAX-2920 and MFC-7225N only)
- Setting Lock
- 3 Setup Send
- 4 Setup Receive
- 5 Quick-Dial numbers and dialling options
- 6 Remote Fax Options
- 7 Printing reports
- 8 Making copies
- 9 Software and Network Features (MFC-7220 and MFC-7225N only)
- 10 Important information
- 11 Troubleshooting and routine maintenance
- Appendix A
- Telephone Service for Australia
- Telephone Service for New Zealand
- Telephone Service for Some Countries
- Advanced receiving operations
- Connecting an external device to your machine
- Appendix B
- Glossary
- Specifications
- Product description
- General
- Print media
- Copy
- Fax
- Scanner (MFC-7220 and MFC-7225N only)
- Printer
- Interfaces
- Download the optional software from the Brother Web Site (FAX-2820 and FAX-2920 users only)
- Computer requirements
- Consumable items
- Network (LAN) (For MFC-7225N only)
- Optional External Wireless Print/Scan Server (NC-2200w) (For MFC-7220 and MFC-7225N only)
- Optional External Print Server (NC-2100p) (For MFC-7220 only)
- Index
- Remote Retrieval Access card
- brother ARL/ASA/NZ
Chapter 3
3 - 7
Broadcasting
Broadcasting is when the same fax message
is automatically sent to more than one fax
number. You can include Groups,
One-Touch, Speed-Dial numbers and up to
50 manually dialled numbers in the same
broadcast.
Press Menu/Set between each of the
numbers. Use Search/Speed Dial to help
you choose the numbers easily. (To set up
Group dial numbers, see
Setting up Groups
for Broadcasting
on page 5-3.)
After the broadcast is finished, a Broadcast
Report will be printed to let you know the
results.
1
If it is not illuminated in green, press
(Fax).
2
Load your document.
3
Enter a number using One-Touch,
Speed-Dial, a Group number, Search or
manual dialling using the dial pad.
Press Menu/Set after each number.
4
After you have entered all the fax
numbers, press Start.
Note
■
If you did not use up any of the numbers
for Groups, access codes or credit card
numbers, you can ‘broadcast’ faxes to as
many as 260 (MFC-7220 and
MFC-7225N) or 270 (FAX-2820 and
FAX-2920) different numbers.
■
The available memory will vary depending
on the types of jobs in the memory and the
number of locations used for
broadcasting. If you broadcast to the
maximum numbers available, you will not
be able to use Dual Access and Delayed
fax.
■
Enter the long dialling sequence numbers
as you would normally, but remember that
each One-Touch and Speed-Dial number
counts as one number, so the number of
locations you can store becomes limited.
(See Access codes and credit card
numbers on page 5-4.)
■
If the memory is full, press Stop/Exit to
stop the job or if more than one page has
been scanned, press Start to send the
portion that is in the memory.