User`s guide
Table Of Contents
- USER’S GUIDE FAX-2820/FAX-2920/MFC-7220/MFC-7225N
- APPROVAL INFORMATION
- Compilation and Publication Notice
- Safety precautions
- Quick Reference Guide
- Table of Contents
- 1 Introduction
- 2 Getting started
- Initial setup
- General Setup
- Setting the Mode Timer (FAX-2820 and FAX-2920 only)
- Setting the Mode Timer (MFC-7220 and MFC-7225N only)
- Setting the Paper Type
- Setting the Paper Size
- Setting the Ring Volume
- Setting the Beeper Volume
- Setting the Speaker Volume
- Setting the Clock Change
- Toner Save
- Sleep Time
- Setting the LCD Contrast
- Security
- TX Lock (FAX-2820 and MFC-7220 only)
- Memory Security (FAX-2920 and MFC-7225N only)
- Setting Lock
- 3 Setup Send
- 4 Setup Receive
- 5 Quick-Dial numbers and dialling options
- 6 Remote Fax Options
- 7 Printing reports
- 8 Making copies
- 9 Software and Network Features (MFC-7220 and MFC-7225N only)
- 10 Important information
- 11 Troubleshooting and routine maintenance
- Appendix A
- Telephone Service for Australia
- Telephone Service for New Zealand
- Telephone Service for Some Countries
- Advanced receiving operations
- Connecting an external device to your machine
- Appendix B
- Glossary
- Specifications
- Product description
- General
- Print media
- Copy
- Fax
- Scanner (MFC-7220 and MFC-7225N only)
- Printer
- Interfaces
- Download the optional software from the Brother Web Site (FAX-2820 and FAX-2920 users only)
- Computer requirements
- Consumable items
- Network (LAN) (For MFC-7225N only)
- Optional External Wireless Print/Scan Server (NC-2200w) (For MFC-7220 and MFC-7225N only)
- Optional External Print Server (NC-2100p) (For MFC-7220 only)
- Index
- Remote Retrieval Access card
- brother ARL/ASA/NZ
Chapter 6
6 - 3
Turning off Remote Fax
Options
1
Press Menu/Set, 2, 5, 1.
2
Press
▲
or
▼
to select
Off
.
Press Menu/Set.
3
Press Stop/Exit.
Note
If you set the remote fax options to Off and
received faxes are left in your machine’s
memory, further LCD messages appear after
Step 2. (See Changing Remote Fax Options.)
Changing Remote Fax
Options
If received faxes are left in your machine’s
memory when you change the remote fax
option the LCD will ask you the following
question:
—OR—
■
If you press 1, faxes in the memory will be
erased or printed before the setting
changes.
■
If you press 2, faxes in the memory will not
be erased or printed and the setting will be
unchanged. If a backup copy has already
been prited it will not be printed again.
(For MFC-7220 and MFC-7225N only)
If received faxes are left in the machine’s
memory when you change to
PC Fax Receive
from another remote fax
option (
Fax Forward
or
Fax Storage
), the
LCD will ask you the following message:
■
If you press 1, and
Backup Print
is set
to
On
, faxes in the memory will be erased
before the setting changes. If you press 1
and Backup print is set to
Off
, faxes in the
memory will be sent to your PC before the
setting changes.
■
If you press 2, faxes in the memory will not
be erased or transfered to your PC and
the setting will be unchanged.
1.Forward/Store
Erase All Doc?
1.Yes 2.No
Print All Fax?
1.Yes 2.No
Send Fax to PC?
1.Yes 2.No