User`s guide
Table Of Contents
- USER’S GUIDE FAX-2820/FAX-2920/MFC-7220/MFC-7225N
- APPROVAL INFORMATION
- Compilation and Publication Notice
- Safety precautions
- Quick Reference Guide
- Table of Contents
- 1 Introduction
- 2 Getting started
- Initial setup
- General Setup
- Setting the Mode Timer (FAX-2820 and FAX-2920 only)
- Setting the Mode Timer (MFC-7220 and MFC-7225N only)
- Setting the Paper Type
- Setting the Paper Size
- Setting the Ring Volume
- Setting the Beeper Volume
- Setting the Speaker Volume
- Setting the Clock Change
- Toner Save
- Sleep Time
- Setting the LCD Contrast
- Security
- TX Lock (FAX-2820 and MFC-7220 only)
- Memory Security (FAX-2920 and MFC-7225N only)
- Setting Lock
- 3 Setup Send
- 4 Setup Receive
- 5 Quick-Dial numbers and dialling options
- 6 Remote Fax Options
- 7 Printing reports
- 8 Making copies
- 9 Software and Network Features (MFC-7220 and MFC-7225N only)
- 10 Important information
- 11 Troubleshooting and routine maintenance
- Appendix A
- Telephone Service for Australia
- Telephone Service for New Zealand
- Telephone Service for Some Countries
- Advanced receiving operations
- Connecting an external device to your machine
- Appendix B
- Glossary
- Specifications
- Product description
- General
- Print media
- Copy
- Fax
- Scanner (MFC-7220 and MFC-7225N only)
- Printer
- Interfaces
- Download the optional software from the Brother Web Site (FAX-2820 and FAX-2920 users only)
- Computer requirements
- Consumable items
- Network (LAN) (For MFC-7225N only)
- Optional External Wireless Print/Scan Server (NC-2200w) (For MFC-7220 and MFC-7225N only)
- Optional External Print Server (NC-2100p) (For MFC-7220 only)
- Index
- Remote Retrieval Access card
- brother ARL/ASA/NZ
Chapter 10
10 - 5
N
Where it is necessary to dial prefix digits,
such as a Caller Display override code
(“0196” or “0197”), this unit will have to be
used in conjunction with an associated tone
signalling (DTMF) telephone.
O
Note that some telephones are not
compatible with this unit and dialling errors
may result if the two devices are used
together in other than quiet conditions. The
Telecom Faults Service is not to be called
should such problems arise. In such cases, it
is recommended that the prefix and wanted
number are dialled manually.
P
This equipment may not provide for the
effective hand-over of a call to another
device connected to the same line.
IMPORTANT-For Your Safety
To ensure safe operation the three-pin plug
supplied must be inserted only into a standard
three-pin power point which is effectively grounded
through the normal household wiring.
Extension cords used with the equipment must be
three-conductor and be correctly wired to provide
connection to ground. Incorrectly wired extension
cords are a major cause of fatalities.
The fact that the equipment operates satisfactorily
does not imply that the power is grounded and that
the installation is completely safe. For your safety,
if in any doubt about the effective grounding of the
power, consult a qualified electrician.
IMPORTANT NOTICE
Under power failure conditions, this telephone may
not operate. Please ensure that a separate
telephone, not dependent on local power, is
available for emergency use in emergencies.
Important Information
for Some Countries
Important Safety Instructions
1
Read all of these instructions.
2
Save them for later reference.
3
Follow all warnings and instructions marked
on the product.
4
Unplug this product from the wall outlet
before cleaning. Do not use liquid or aerosol
cleaners. Use a damp cloth for cleaning.
5
Do not place this product near water.
6
Do not place this product on an unstable
cart, stand, or table. The product may drop,
causing serious damage to the product.
7
Slots and openings in the cabinet and the
back or bottom are provided for ventilation;
to ensure reliable operation of the product
and to protect it from overheating, these
openings must not be blocked or covered.
The openings should never be blocked by
placing the product on a bed, sofa, rug, or
other similar surface. This product should
never be placed near or on a radiator or
heater. This product should never be placed
in a built-in installation unless proper
ventilation is provided.
8
This product should be operated from the
type of power source indicated on the label.
If you are not sure of the type of power
available, consult with your dealer or local
power company.