User's Manual

Remote Fax Options
6 - 6
6
Remote commands
Follow the commands below to access features when you are away from the machine. When you
call the machine and enter your Remote Access Code (3 digits followed by ), the system will
give two short beeps and you must enter a remote command.
Remote commands Operation details
95 Change the Fax Forwarding,
Paging or Fax Storage settings
1 OFF You can select
Off after you have retrieved or erased all your
messages.
2 Fax Forwarding If you hear one long beep, the change has been accepted. If
you hear three short beeps, you cannot change it because
something has not been set up (for example, perhaps a Fax
Forwarding or Paging number had not been registered). You
can register your Fax Forwarding number by entering 4. (See
Changing your Fax Forwarding number on page 6-7.) Once
youd4 n31873 scn6 0 1w6a-12.1.cepted. you(n)05T.7(e)07( )-26.3(I)11.7(f)11.7( )]TJ15.0263 -1.1842 c7(f)2 c7(f67).1842 326.5(11.)8.3 -1.1842 c1326.5(11.)8-[(gl1(n)0. 16 -[26.1842i75363 -1.1842 1( n)26.l9271.02 Tc[(R)6.9(.1842 c1326.5(11.)868( )-gCgCgCgCgCgCg Tc-0-18.1 )-26.3(ng)nPagi)5Chang -r26.3S33