User Manual

24
4
How to send a fax 4
The following steps show how to send a fax.
a When you want to send a fax, or change
fax send or receive settings, press the
(FAX) key to illuminate it in
green.
b Place the document face down in the
ADF. (See Using the automatic
document feeder (ADF) uu page 22.)
c Set the fax resolution or contrast if you
want to change them.
For more advanced fax sending
operations and settings, see Advanced
User’s Guide: Sending a fax.
 Broadcast
 Delayed Fax
 Batch TX
 Real Time TX
 Polled TX
 Overseas Mode
 Fax Resolution
 Contrast
 Coverpg Setup
 Coverpage Msg
d Enter the fax number using the dial pad,
a One Touch key or (Address Book)
and enter three-digit Speed Dial
number.
e Press Start.
The machine starts scanning and
sending the document.
Note
To cancel, press Stop/Exit.
Canceling a fax in progress 4
Press Stop/Exit to cancel the fax. If you
press Stop/Exit while the machine is dialing
or sending, the LCD will ask you to confirm.
Dialing #XXX
1.Clear 2.Exit
Sending #XXX P01
1.Clear 2.Exit
Press 1 to cancel the fax.
Sending a fax 4