Advanced User's Guide
Table Of Contents
- Advanced User’s Guide FAX-2840/FAX-2940/MFC-7240
- User’s Guides and where do I find them?
- Download optional software from the Brother Solutions Center (FAX-2840 and FAX-2940 users)
- Table of Contents
- 1 General Setup
- 2 Security features
- 3 Sending a fax
- 4 Receiving a fax
- 5 Dialing and storing numbers
- 6 Printing reports
- 7 Making copies
- A Routine maintenance
- B Glossary
- Index
Chapter 2
12
Setting up the password 2
a Press Menu, 1, 6, 2.
Security
2.Setting Lock
b Enter a four-digit number for the
password using numbers 0-9.
Press OK.
c Re-enter your password when the LCD
shows Verify:.
Press OK.
d Press Stop/Exit.
Changing your Setting Lock
password
2
a Press Menu, 1, 6, 2.
Security
2.Setting Lock
b Press a or b to choose Set Password.
Press OK.
c Enter your four-digit password.
Press OK.
d Enter a four-digit number for the new
password.
Press OK.
e Re-enter your new password when the
LCD shows Verify:.
Press OK.
f Press Stop/Exit.
Turning Setting Lock on/off 2
If you enter the wrong password when
following the instructions below, the LCD will
show Wrong Password. Re-enter the
correct password.
Turning Setting Lock on
a Press Menu, 1, 6, 2.
Security
2.Setting Lock
b Press a or b to choose On.
Press OK.
c Enter your four-digit password.
Press OK.
d Press Stop/Exit.
Turning Setting Lock off
a Press Menu, 1, 6, 2.
Security
2.Setting Lock
b Enter your four-digit password.
Press OK twice.
c Press Stop/Exit.