User Guide

2-9
8. If desired, change the name of the printer then click on Next.
9. If desired, make the printer shared (so other users can access it), and select the
operating system(s) that these other computers will be running. Click on Next.
10. Select Yes when you are asked "Would you like to print a test page?" Click on Finish
to complete the installation. You may now print to the printer as if it were a local
printer.
Windows NT 3.5x Print Queue Configuration
If you have Windows NT 3.5 or 3.51, use the following procedure to configure the print
server.
1. Go to the Main window and select the Print Manager icon.
2. Select Printer menu.
3. Select Create Printer.
4. Enter any name for the Printer Name.
5. Select Driver. Choose the appropriate driver.
6. Select Description. Enter anything for the description.
7. Select Print to and then select Other.
8. Select LPR Port.
9. Type in the IP address that you assigned to the print server in the Name or address of
host server providing lpd: box. If you have edited your HOSTS file or are using
Domain Name System, enter the name associated with the print server, instead of an IP
address.
10. Type in the print server service name in the Name of printer on that Machine. If you
do not know which service name to use, enter BINARY_P1 and then click on OK.
✒ Note
Refer to How to configure TCP/IP printing for Unix system for more information on Service
Names.
11. Share the printer if necessary.