User Guide

4–5
7. You must now enter the server name and port name for actual print server. You can use
the Browse button for searching the print server, select the domain/workgroup name,
then the server is listed. If the print server does not automatically appear in your
browse list, then you must ensure that the domain name is configured correctly.
Otherwise you must enter the name manually. The name should be compliant with
UNC (Universal Name Convention). For example
“
\\NodeName\ServiceName
”
.
Where NodeName is the NetBIOS name of the Brother print server (the default name is
BRN_xxxxxx, where
“
xxxxxx
”
is the last six digits of the Ethernet address), and
ServiceName is the service name for NetBIOS of the Print server, by default it is
BINARY_P1. For example:
\\BRN_310107\BINARY_P1
✒ Note
You can find the NetBIOS name and MAC address by printing out the printer configuration
page. Refer t the Quick Setup Guide for information on how to print the configuration page on
your print server.
8. Then press
“
OK
”
.
9. Click the Finish button. You must now restart your computer before you can continue.