Multi-Protocol Print Server Network User’s Guide Please read this manual thoroughly before using the printer. You can print or view this manual from the CD-ROM at any time, please keep the CD-ROM in a convenient place for quick and easy reference at all times. The Brother Solutions Center (http://solutions.brother.com) is your one stop resource for all your printer needs.
Trademarks Brother is a registered trademark of Brother Industries, Ltd. HP, HP/UX,JetDirect and JetAdmin are trademarks of Hewllet-Packard Company. DEC, DEC server, VMS and ULTRIX are trademarks of Digital Equipment Corporation. UNIX is a trademarks of UNIX Systems Laboratories. Ethernet is trademark of Xerox Corporation. Postscript is trademark of Adobe Systems Incorporated. Netware is a trademark of Novell, Inc. Apple, Macintosh, LaserWriter, and AppleTalk are trademarks of Apple Computer, Inc.
For technical and operational assistance, please visit the Brother web site on http://www.brother.com If you have comments or suggestions, please write us at: In Europe European Technical Services 1 Tame Street Audenshaw Manchester, M34 5JE UK In USA Printer Customer Support Brother International Corporation 15 Musick Irvine, CA 92618 In CANADA Brother International Corporation (Canada), Ltd. - Marketing Dept.
TABLE OF CONTENTS CHAPTER ONE UNIX PRINTING PRINTING FROM UNIX/LINUX USING TCP/IP Overview 1-1 TCP/IP 1-2 General TCP/IP UNIX Host Configuration 1-3 Linux Configuration 1-6 HP/UX Configuration 1-7 IBM RS/6000 AIX Configuration 1-8 Sun Solaris 2.
IPP Printing from Windows 2000 Clients IPP printing from Windows 95/98/Me Clients 2-4 2-4 Windows 2000 Printing (Printer Driver already installed) 2-4 Windows NT 4.0 Printing 2-5 Windows NT 4.0 Printing (Printer Driver not yet installed) 2-6 Windows NT 4.0 Printing (Printer Driver already installed) 2-7 Windows NT 3.5x Printing 2-8 Windows NT 3.
NetBIOS Port Monitor for Windows 95/98/Me, NT4.0/2000 4-4 Installing the Brother NetBIOS Port Monitor 4-4 Associating the printer Windows 95/98/Me Windows NT4.0/2000 4-6 4-6 4-6 Adding a Second NetBIOS Print Port Windows 95/98/Me Windows NT4.0/2000 4-7 4-7 4-7 LAN Server/OS/2 Warp Server Configuration Server Configuration: Workstation Configuration: 4-8 4-8 4-8 Other Sources of Information 4-9 CHAPTER FIVE HOW TO CONFIGURE INTERNET PRINTING FOR WINDOWS 95/98/ME NT 4.
CHAPTER SIX NOVELL NETWARE PRINTING HOW TO CONFIGURE NOVELL NETWARE PRINTING Overview 6-1 General Information 6-2 Creating a NDPS Printer Using NWADMIN for NetWare5 6-3 NDPS Manager 6-3 NDPS Broker 6-3 Creating a Printer Agent 6-4 Configuring Netware 3 and NetWare 4 systems 6-5 Configuring the Brother Print Server (Queue Server Mode in Bindery emulation mode) using BRAdmin 6-6 Configuring the Brother Print Server (Queue Server Mode in NDS mode) using BRAdmin 6-7 Configuring the Brother Pri
How to Select the Print Server (AppleTalk/EtherTalk) 7-3 How to Select the Print Server (TCP/IP) 7-4 Changing the Configuration 7-6 Other Sources of Information 7-6 CHAPTER EIGHT DLC PRINTING PRINTING FROM WINDOWS NT OR WINDOWS 2000 Overview 8-1 Configuring DLC on Windows NT/2000 8-2 Windows 2000 Printer Setup 8-3 Windows NT 4.0 Printer Setup 8-4 Windows NT 3.
Using BRAdmin and the TCP/IP Protocol to change the IP address 10-4 Using DHCP to Configure the IP address 10-5 Using ARP to Configure the Print Server IP Address 10-6 Using RARP to Configure the IP Address 10-7 Using BOOTP to Configure the IP Address 10-8 Configuring the IP Address with DEC NCP or BRCONFIG 10-9 Changing the IP Address settings with the TELNET Console 10-11 Other Sources of Information 10-12 CHAPTER THIRTEEN TROUBLESHOOTING Overview 11-1 Installation problems 11-2 Interm
APPENDIX Appendix A General Information A-1 A-1 Appendix B Using Services General A-3 A-3 Appendix C Reloading the Print Server Firmware General Reloading firmware using BRAdmin Reloading process Reloading using the FTP Protocol from a command prompt Reloading using the FTP Protocol from a Web Browser A-4 A-4 A-5 A-6 A-7 A-8 INDEX I-1 x
IMPORTANT INFORMATION: REGULATIONS Federal Communications Commission (FCC) Declaration of Conformity (For U.S.A. only) Responsible Party: Brother International Corporation 100 Somerset Corporate Boulvard Bridgewater, NJ 09907-0911, USA TEL: (908) 704-1700 declares, that the products Product Name: Model Number: Brother Network Card (BR-net) NC-3100h complies with Part 15 of the FCC Rules.
Industry Canada Compliance Statement (For Canada only) This Class B digital apparatus complies with Canadian ICES-003. Cet appareil numérique de la classe B est conforme a la norme NMB-003 du Canada. DECLARATION OF CONFORMITY (EUROPE) We, Brother Industries, Ltd., 15-1, Naeshiro-cho, Mizuho-ku, Nagoya 467-8561, Japan declare that this product is in conformity with the following normative documents.
CHAPTER 1 UNIX PRINTING CHAPTER ONE 1 Unix Printing Printing from Unix/Linux using TCP/IP 11 Overview Brother print servers are supplied with the Transmission Control Protocol/Internet Protocol (TCP/IP) protocol suite. Since virtually all UNIX host computers support TCP/IP, this capability allows a printer to be shared on a UNIX Ethernet network.
CHAPTER 1 UNIX PRINTING TCP/IP Brother Print Servers appear to the network as a UNIX host computer with a unique IP address running the lpd, line printer daemon, protocol. As a result, any host computer that supports the Berkeley remote LPR command can spool jobs to Brother Print Servers without the need for any special software on the host computer. For special applications, raw TCP ports are also available. The Brother NC-3100h and NC-4100h print servers also support the FTP protocol.
CHAPTER 1 UNIX PRINTING General TCP/IP UNIX Host Configuration The configuration process for most UNIX systems is described in the following steps. As this process varies, we recommend that you refer to your system documentation (or man pages) for additional information. 1. Configure the /etc/hosts file on each UNIX host that needs to communicate with the print server. Use your favorite editor to add an entry to the /etc/hosts file containing the IP address and node name of the device. For example: 192.
CHAPTER 1 UNIX PRINTING 2. Choose which print server service you want to use. There are several types of services available on Brother Print Servers. Binary services pass data through unmodified and are therefore required for PCL or PostScript rasterized graphics printouts. Text services add a carriage return at the end of each line for proper formatting of UNIX text files (which end in linefeed and do not have carriage returns).
CHAPTER 1 UNIX PRINTING An example of a typical printcap file: laser1|Printer on Floor 1:\ :lp=:\ :rm=BRN_310107:\ :rp=TEXT_P1:\ :sd=/usr/spool/lpd/laser1: Make sure this information is added to the end of the printcap file.
CHAPTER 1 UNIX PRINTING Linux Configuration If you do not wish to use the command line interface to configure your Linux distribution, you may wish to use the Linux Printer System Manager application on your GUI. To do this, do the following: 1. From the Linux Printer System Manager screen, click the "Add" button. 2. You will now be asked to specify which Printer type you are using, select the "Remote Unix (lpd) Queue" option and click "OK". 3.
CHAPTER 1 UNIX PRINTING HP/UX Configuration In the case of HP/UX10.xx, the sam program is used to set up the remote printer. The steps are as follows: 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. Execute the sam program.
CHAPTER 1 UNIX PRINTING IBM RS/6000 AIX Configuration The RS/6000 AIX operating system uses the smit program to set up the remote printer. The procedure is as follows for AIX 4.0 and later: 1. 2. 3. 4. 5. 6.
CHAPTER 1 UNIX PRINTING Sun Solaris 2.x Configuration Sun Solaris 2.x uses the lpsystem and lpadmin programs for remote printer configuration: lpsystem -t bsd prnservername lpadmin -p queue -s prnservername!prnserverservice accept queue (not required on newer Solaris systems) enable queue (not required on newer Solaris systems) Where queue is the name of the local print queue. prnservername is the name of the print server (must match the entry in the /etc/hosts file or IP address).
CHAPTER 1 UNIX PRINTING SCO UNIX Configuration To configure a printer in version Version 5.x of SCO Unix, use the SCOADMIN program. 1. Select Printers and then Print Manager 2. On the menu select Printer and then Add Remote followed by Unix… 3. Enter the IP address of the print server and type in the printer name to be used to spool to. 4. Deselect "Use External remote Printing Protocol…" 5. Edit the /etc/printcap file to include formfeed add the text rp=lpaf SCO UNIX requires TCP/IP V1.
CHAPTER 1 UNIX PRINTING DEC TCP/IP Servers for VMS(UCX) You need to run the sys$system:ucx:$lprsetup command, specify a printer name, and then enter the print server IP address as the remote system name. Specify one of the print server services (see beginning of this section for options) as the remote system printer name (accept the defaults for other questions).
CHAPTER 1 UNIX PRINTING Other Systems Other systems use similar programs to set up Print servers. These programs will generally ask for the following information: Requested information: remote printer remote host computer name You should use: Binary or Text service name Any name (must match the name in the printcap file, if any) or in some cases, you may enter the print server IP address here IP address of print server.
CHAPTER 1 UNIX PRINTING Other Sources of Information 1. Visit http://solutions.brother.com/ for more information on network printing. 2. Refer to chapter 10 of this user guide to learn how to configure the IP address of the printer.
CHAPTER 2 TCP/IP PRINTING CHAPTER TWO 2 TCP/IP Printing Printing from Windows NT or Windows 2000, LAN Server and Warp Server 21 Overview Users of Windows NT can print directly to a network ready Brother using the TCP/IP protocol. Microsoft Windows NT 3.5x and NT 4.0 users must install Microsoft's "TCP/IP printing" protocol. Windows 2000 users are able to send print jobs directly to the printer without installing any additional software.
CHAPTER 2 TCP/IP PRINTING Windows NT 3.5x/NT 4.0/2000 (TCP/IP) Configuration If you have not already done so, install the TCP/IP protocol onto your Windows NT system. This is done via the Network icon in the Control Panel window of the Windows NT system (the Control Panel is in the Main window on NT 3.5x systems, or use the Start button on NT 4.0 to access the Settings/Control Panel menu). The default configuration of Windows 2000 automatically installs the TCP/IP protocol.
CHAPTER 2 TCP/IP PRINTING Windows 2000 Printing (Printer Driver not yet installed) By default, Windows 2000 systems install with all the necessary software required for you to be able to print. This chapter describes the two most commonly used configurations, Standard TCP/IP Port printing and IPP (Internet Printing Protocol). If you have already installed the printer driver, jump to the printer driver already installed section. Standard TCP/IP Port Printing 1.
CHAPTER 2 TCP/IP PRINTING IPP Printing from Windows 2000 Clients If you wish to print using the IPP protocol, follow these steps: 1. From the Printers Folder select "Add Printer", the "Add Printer Wizard" will now stat. Click on "Next" 2. Select "Network Printer" 3. Click the "Connect to a printer on the Internet or on your intranet" option 4.
CHAPTER 2 TCP/IP PRINTING Windows NT 4.0 Printing If you did not install the TCP/IP protocol or the Microsoft TCP/IP Printing protocol during the installation of your Windows NT 4.0 system (either workstation or server) follow these steps. Please note that it is essential that you install the Microsoft TCP/IP Printing protocol if you wish to print over the network using the TCP/IP protocol. If you have already installed the TCP/IP protocol and Printing protocol proceed to step 2.
CHAPTER 2 TCP/IP PRINTING Windows NT 4.0 Printing (Printer Driver not yet installed) 1. Go to the Start button, choose Settings, and then select Printers. Double click the Add Printer icon to get the Add Printer Wizard. Click. Select My Computer (Not Network Printer) and click on Next. 2. Select Add Port, select LPR Port (LPR Port will not be displayed unless you install the "Microsoft TCP/IP Printing" protocol as described earlier) from the list of available ports and click on New Port. 3.
CHAPTER 2 TCP/IP PRINTING Windows NT 4.0 Printing (Printer Driver already installed) Follow these steps if the printer driver is already installed. 1. Click on Start then select Settings/Printers to display the currently installed printer drivers. 2. Double click the printer driver you wish to configure and select Printer menu and then choose Properties. 3. Select the Ports tab and click on Add Port. 4.
CHAPTER 2 TCP/IP PRINTING Windows NT 3.5x Printing 1. Go into the Control Panel and run the Network applet. 2. Select Add Software and TCP/IP Protocol and related components. 3. Select the TCP/IP Network Printing Support check box. And then click on the Continue button. (This option will be unavailable if the TCP/IP Network Printing Support protocol is already installed. 4. Insert the requested disk(s) to copy the required files. Your NT server will need to be re-booted when the files are copied over.
CHAPTER 2 TCP/IP PRINTING LAN Server, OS/2 Warp Server Configuration Brother Print Servers will work with IBM LAN Server, OS/2 Warp Server networks that have IBM TCP/IP V2.0 or later installed on the file server (TCP/IP is supplied as standard with LAN Server V4.0 and later as well as Warp Server).
CHAPTER 2 TCP/IP PRINTING You may leave the other entries blank. Click on the OK button. The pipe should be highlighted; if not click on it. Click on the Create button to create the printer. Open the LAN Services folder and execute the LAN Requester program: 1. 2. 3. 4. Select Definitions Select Aliases Select Printers Select Create.
CHAPTER 2 TCP/IP PRINTING Other Sources of Information 1. Visit http://solutions.brother.com/ for more information on network printing and for documents on the IPP protocol and how to configure a Windows 2000/95/98/Me System. 2. Refer to chapter 10 of this user guide to learn how to configure the IP address of the printer.
CHAPTER 3 TCP/IP PEER TO PEER PRINTING CHAPTER THREE 3 Peer to Peer Printing How to Print in a Windows 95/98/Me Peer to Peer network 31 31 Overview Microsoft's Windows 95/98/Me operating systems features built-in networking capabilities. These capabilities allow a Windows PC to be configured as a client workstation in a file server based network environment. For smaller networks, Windows 95/98/Me also allows the PC to operate in a peer-topeer mode.
CHAPTER 3 TCP/IP PEER TO PEER PRINTING TCP/IP Printing Our Peer to Peer printing software requires the TCP/IP protocol to be installed on your Windows peer-to-peer computers and an IP Address had to be defined for the print server. Refer to your Windows documentation for more information on how to configure the TCP/IP protocol on your Windows PC. If you haven’t already done so, configure the IP address of the printer, for more information on IP address configuration, refer to chapter 10 of this user guide.
CHAPTER 3 TCP/IP PEER TO PEER PRINTING Installing the Brother Peer to Peer Software 1. Start the CD-ROM installation menu program according to the Quick Setup Guide. 2. Select the proper Model and Software Installation menu. Then select the appropriate menu to start the Brother Print Software installation program. 3. Push the Next button in response to the Welcome message. 4. Select the Brother Peer to Peer Print (LPR) button 5.
CHAPTER 3 TCP/IP PEER TO PEER PRINTING Associating to the printer You must now create a printer on your Windows system using the standard Windows printer setup procedure. 1. 2. 3. 4. 5. 6. 7. 8. 9. To do this, go the Start button, select Setting and then Printers. Select Add Printer to begin the printer installation. Click Next when you get the add Printer Wizard window. Select Local Printer when you are asked how the printers are connected to your computer, and then push Next. Select the correct driver.
CHAPTER 3 TCP/IP PEER TO PEER PRINTING Other Sources of Information 1. Visit http://solutions.brother.com/ for more information on network printing. 2. Refer to chapter 10 of this user guide to learn how to configure the IP address of the printer.
CHAPTER 4 NETBIOS PEER-TO-PEER PRINTING CHAPTER FOUR 4 NetBIOS Peer to Peer Printing How to Printing using NetBIOS on Windows 95/98/Me/NT/2000, LAN Server and OS/2 Warp Server 41 Overview Brother's Print Server range supports SMB (Server Message Block) over the TCP/IP protocol via the NetBIOS interface. This means that just like regular Windows PC’s, Brother printers can appear in your network neighborhood.
CHAPTER 4 NETBIOS PEER-TO-PEER PRINTING Print Server Configuration In order for this function to work, you must correctly change the DOMAIN name or WORKGROUP name to match that of your network. Once this is done, the print server will appear automatically in your network neighborhood and you will be able to send print documents to it without having to install additional software. However, in some instances you may find that your Windows 95/98/Me and Windows NT4.
CHAPTER 4 NETBIOS PEER-TO-PEER PRINTING Changing the workgroup/domain name using TELNET or BRCONFIG or a web browser If you are unable to use a BRAdmin application or a web browser, you can use TELNET or the BRCONFIG Remote console program (BRCONFIG requires the IPX/SPX protocol to be installed on your PC). When you are connected to the print server, enter the default password "access" in response to the "#" prompt.
CHAPTER 4 NETBIOS PEER-TO-PEER PRINTING NetBIOS Port Monitor for Windows 95/98/Me, NT4.0/2000 This software requires the TCP/IP transport protocols to be installed on your Windows 95/98/Me, NT4.0/2000 computer. To install those protocols refer to your Windows documentation. If you are using the TCP/IP protocol, the proper IP address should be defined on both the Brother print server and your client PC. Installing the Brother NetBIOS Port Monitor 1.
CHAPTER 4 NETBIOS PEER-TO-PEER PRINTING Where NodeName is the NetBIOS name of the Brother print server (the default name is usually BRN_xxxxxx, where "xxxxxx" is the last six digits of the Ethernet address), and ServiceName is the service name for NetBIOS of the Print server, by default it is BINARY_P1. For example: \\BRN_310107\BINARY_P1 NC-2000 series print servers such as the NC-2010h or NC-2100h have a default name of BRO_xxxxxx.
CHAPTER 4 NETBIOS PEER-TO-PEER PRINTING Associating the printer 1. You must now create a printer on your Windows 95/98/Me and NT4.0/2000 system using the standard Windows printer setup procedure. To do this, go the Start button, select Setting and then Printers. Windows 95/98/Me 2. Select Add Printer to begin the printer installation. 3. Click Next when you get the add Printer Wizard window. 4. Select Local Printer when you are asked how the printer is connected to your computer, and then push Next. 5.
CHAPTER 4 NETBIOS PEER-TO-PEER PRINTING Adding a Second NetBIOS Print Port 1. You do not need to re-run the installation program to add a new NetBIOS port. Instead, press the Start button, select Settings, and open the Printers windows. Click on the icon of the printer that you wish to configure, select File from the Menu bar, and then choose Properties. Windows 95/98/Me 2. Click on the Details tab and push the Add Port button.
CHAPTER 4 NETBIOS PEER-TO-PEER PRINTING LAN Server/OS/2 Warp Server Configuration As Brother print servers support the SMB protocol over TCP/IP via a NetBIOS interface, you can easily configure your printer to work with an IBM LAN Server and OS/2 Warp Server networks that have IBM TCP/IP V2.0 or later installed on the fileserver. Use the following procedure to configure the LAN Server, OS/2 Warp Server or OS/2 Warp connect workstation. Server Configuration: 1. 2. 3. 4. 5. 6. 7.
CHAPTER 4 NETBIOS PEER-TO-PEER PRINTING Other Sources of Information 1. Visit http://solutions.brother.com/ for more information on network printing. 2. Refer chapter 10 of this user guide to learn how to configure the IP address of the printer.
CHAPTER 5 BIP INTERNET PRINTING INSTALLATION CHAPTER FIVE 5 How to Configure Internet Printing for Windows 95/98/Me NT 4.0/Windows 2000 Internet Printing Installation 51 Overview Brother's Brother Internet Print (BIP ) software, for Windows 95/98/Me/NT4.0, allows a PC user at one location, to send a print job to a Brother Printer at a remote location via the Internet.
CHAPTER 5 BIP INTERNET PRINTING INSTALLATION Brother Internet Print General Information The BIP software is installed using a standard Windows 95/98/Me/NT4.0 Installation Wizard. It creates a virtual port on the Windows 95/98/Me/NT4.0 PC that operates in a similar way to the standard LPT1 printer port from the Application program point of view. The user can use the Windows 95/98/MeNT4.0 Print Manager to create a printer that uses this port along with a standard Windows 95/98/Me, NT4.0compatible printer.
CHAPTER 5 BIP INTERNET PRINTING INSTALLATION Brother Internet Print Configuring the Brother Print Server The print server can be configured using BRAdmin, by using a web browser, or by using the TELNET command. Print Server Configuration Checklist Before configuring the print server to receive BIP jobs, be sure that the E-mail server at the remote site (the receiving end) is configured to handle the TCP/IP POP3, and SMTP protocols (SMTP is only required if the notification feature is enabled). 1.
CHAPTER 5 BIP INTERNET PRINTING INSTALLATION Brother Internet Print Using BRAdmin to Configure the Print Server Skip this section if you wish to use the print server remote console or Web Browser to configure the print server. Using the BRAdmin application, you can configure the Brother print server using the TCP/IP protocol, or the IPX protocol. The steps required to configure the print server to receive print jobs from a Windows 95/98//Me/NT4.0. PC running the BIP software is as follows: 1.
CHAPTER 5 BIP INTERNET PRINTING INSTALLATION Brother Internet Print Using a Web Browser to configure the Print Server 1. Connect to the printer server IP address using your web browser. 2. When you reach the network configuration screen, you will be prompted for a password. The default password is "access" 3. Select the Configure Internet option and enter the information as described above. Refer to "Using BRAdmin to Configure the Print Server" 4. You should see a Segmented Message Timeout option.
CHAPTER 5 BIP INTERNET PRINTING INSTALLATION Brother Internet Print Using TELNET to Configure the Print Server Skip this section if you used BRAdmin or a Web Browser to configure the remote print server. As an alternative to BRAdmin, you can use the print server remote console to configure the print server. The console can be accessed via TELNET. When you access the print server using these utilities, you will be asked for a password. The default password is "access". 1.
CHAPTER 5 BIP INTERNET PRINTING INSTALLATION Brother Internet Print Installing the BIP software on Windows 95/98/Me/NT4.0/2000 To install the BIP software on a Windows 95/98/NT4.0 PC, execute the following steps: • • Be sure that the PC is running an E-mail program (for example, Microsoft Outlook) that is capable of sending E-mail message using Winsock. Be sure that your E-mail server is capable of sending messages across the Internet. Setup from CD-ROM 1.
CHAPTER 5 BIP INTERNET PRINTING INSTALLATION 9. You will then be asked to enter the port settings for the remote print server: Enter any unique legal Internet E-mail address for the remote print server (for example emailprinter@xyz.com). Note that Internet E-mail addresses cannot have spaces in them. Enter your E-mail address and the IP address of your SMTP E-mail server (consult your network administrator if you do not know this address).
CHAPTER 5 BIP INTERNET PRINTING INSTALLATION 15. Select the desired model of the remote printer (for example, Brother HLseries). If necessary, click Have Disk to load the driver from the printer's installation diskette. Click Next when you are done. 16. If you have selected a printer driver that is already being used, you have the option of either keeping the existing driver (recommended) or replacing it. Select the desired option and press Next. 17.
CHAPTER 5 BIP INTERNET PRINTING INSTALLATION Adding a Second Brother Internet Port You should not re-run the install program to add a new Brother Internet Port. Instead, press the Start button, select Settings, and open the Printers windows. Click on the icon of a printer that is using BIP, select File from the menu bar, and then choose Properties. Click on the Details (Ports on Windows NT) tab and push the Add Port button.
CHAPTER 5 BIP INTERNET PRINTING INSTALLATION Windows 2000 IPP Printing Use the following instructions if you wish to use the IPP printing capabilities of Windows 2000. 1. Run the Add Printer Wizard and click the Next button when you see the “Welcome to the Add Printer Wizard” screen. 2. You are now able to select “Local Printer” or “Network Printer”. Make sure that you select “Network Printer”. 3. You will see the “Add Printer Wizard” screen. 4.
CHAPTER 5 BIP INTERNET PRINTING INSTALLATION Specifying a different URL Please note that there are several possible entries that you can enter for the URL field. http://printer_ip_address:631/ipp This is the default URL and we recommend that you use this URL. Please note the “Get Mori Info” option will not display any printer data http://printer_ip_address:631/ipp/port1 This is for HP JetDirect compatibility.
CHAPTER 6 NOVELL NETWARE PRINTING CHAPTER SIX 6 Novell NetWare Printing How to configure Novell NetWare Printing 61 Overview Brother Print Servers allow NetWare client PCs to print jobs on the same printer as TCP/IP or other network protocol users. All NetWare jobs are spooled through the Novell server and delivered to the printer when it is available. Quick Tips: 1. The default IP address of Brother print servers is 192.0.0.192.
CHAPTER 6 NOVELL NETWARE PRINTING General Information In order to use a Brother print server on a NetWare network, one or more file servers must be configured with a print queue that the print server can service. Users send their print requests to the file server's print queue, and the jobs are then spooled (either directly, or in the case of remote printer mode, via an intermediate print server) to the appropriate Brother print server.
CHAPTER 6 NOVELL NETWARE PRINTING Creating a NDPS Printer Using NWADMIN for NetWare5 With NetWare 5, Novell has released a new preferred printing system called Novell Distributed Print Services (NDPS). Before the Print Server can be configured, NDPS must be installed on the NetWare 5 server and an NDPS Manager configured on the server. For further information regarding NDPS printers and printing please refer to the “Other Sources of Information” section at the end of this chapter.
CHAPTER 6 NOVELL NETWARE PRINTING 9. A complete list of currently loaded resources of that type appears in the Current Resources window. Click the Add button. 10. The Add dialog appears. The listed resources that appear on this screen are currently installed. 11. Press the Browse button to locate the driver you want to add to the list. The driver list appears possibly showing several printers.
CHAPTER 6 NOVELL NETWARE PRINTING Configuring Netware 3 and NetWare 4 systems Brother's BRAdmin application provides similar functionality to the NetWare PCONSOLE utility (or the NWADMIN utility in NetWare 4.1x or later). To use the BRAdmin application to configure a Brother print server under NetWare, make sure that you are logged in as SUPERVISOR (NetWare 2.xx or 3.xx) or ADMIN (NetWare 4.1x or later) and perform the appropriate steps as detailed in the following pages.
CHAPTER 6 NOVELL NETWARE PRINTING Configuring the Brother Print Server (Queue Server Mode in Bindery emulation mode) using BRAdmin 1. Make sure that you logged in as SUPERVISOR (NetWare 2.xx or 3.xx) or ADMIN (NetWare 4.xx or later). 2. Start BRAdmin. 3. One or more print server will appear in the list (the default node names are BRN_xxxxxx, where "xxxxxx" is the last six digits of the Ethernet address (MAC address)).
CHAPTER 6 NOVELL NETWARE PRINTING Configuring the Brother Print Server (Queue Server Mode in NDS mode) using BRAdmin 1. Make sure that you logged in as ADMIN in NDS mode. 2. Start BRAdmin. 3. One or more print server services will appear in the list of printers (the default node names are BRN_xxxxxx, where "xxxxxx" is the last six digits of the Ethernet address (MAC address)). Brother NC-2000 series print servers appear as BRO_xxxxxx.
CHAPTER 6 NOVELL NETWARE PRINTING Configuring the Brother Print Server (Queue Server Mode in NDS mode) using Novell NWADMIN and BRAdmin If you do not wish to use the Brother BRAdmin application solely to configure your NetWare file server, use the following instructions for configuration using the NWADMIN application in conjunction with the BRAdmin application. 1. Make sure that you are logged in as ADMIN in NDS mode on the NetWare 4.1x (or later) file server and start the NWADMIN application. 2.
CHAPTER 6 NOVELL NETWARE PRINTING Change the context if necessary and select the print queue you created in step 5. 9. Click Configuration and set the Printer type to Other/Unknown. Click OK and then OK again. 10. Change the context if required, select Object from the menu bar and then Create. When you get the New Object menu, select Print Server and then OK. 11. Enter the name of the print server and select Create.
CHAPTER 6 NOVELL NETWARE PRINTING Configuring the Brother Print Server (Remote Server Mode in NDS mode) using Novell NWAdmin and BRAdmin To configure a Brother print server for remote printer mode with NWADMIN (NetWare Administrator utility) and BRAdmin, you will need to perform the following steps: 1. Make sure that the PSERVER NLM (NetWare Loadable Module) is loaded on your file server and that you are logged in as ADMIN in NDS mode on the NetWare 4.1x file server. 2.
CHAPTER 6 NOVELL NETWARE PRINTING 9. Click on the button to select the print queue volume. Change the directory context if necessary, then select the desired volume (Objects) and click OK. Click Create to create the print queue. 10. Change context if required and then double click the name of the printer you created previously. 11. Click Assignments and then Add. 12. Change context if necessary and select the print queue you created. Click OK and then OK again, and then exit NWADMIN. 13.
CHAPTER 6 NOVELL NETWARE PRINTING Configuring the Brother Print Server (Queue Server Mode in Bindery emulation mode) using PCONSOLE and BRCONFIG 1. Login as Supervisor (NetWare 3.xx) or ADMIN (NetWare 4.1x or later; be sure to specify the /b option for bindery mode). 2.
CHAPTER 6 NOVELL NETWARE PRINTING 8. Type EXIT to exit the BRCONFIG remote console program and save the changes and start the Novell PCONSOLE utility. 9. Select Print Server Information (NetWare 3.xx) or Print Servers (NetWare 4.1x; ignore the warning message) from the Available Options menu. 10. You will be shown a list of current print servers.
CHAPTER 6 NOVELL NETWARE PRINTING Configuring the Brother Print Server (Queue Server Mode in NDS mode) using PCONSOLE and BRCONFIG 1. Make sure that you are logged in as ADMIN in NDS mode on the NetWare 4.1x file server. 2. Run the PCONSOLE utility from PC workstation. 3. Select Print Servers from the Available Options menu. 4.
CHAPTER 6 NOVELL NETWARE PRINTING 18. Execute the BRCONFIG from the Windows menu or insert the Brother Print Server Configuration Utility diskette in Drive A: of your PC and type: A:BRCONFIG. Select the print server from the list of print servers. When you get the message that the print server is connected, press the ENTER key and type the default password of "access" in response to the "#" prompt (the password will not echo), and then press the ENTER key again in response to the ENTER Username> prompt.
CHAPTER 6 NOVELL NETWARE PRINTING Configuring the Brother Print Server (Remote Printer Mode using PCONSOLE and BRCONFIG 1. Make sure that the PSERVER NLM (NetWare Loadable Module) is loaded on your file server. 2. Log into the file server from your PC workstation as ADMIN if you are using NetWare 4.1x (if you want NDS support, do not login under bindery mode). If you are using NetWare 2.xx or 3.xx, login as SUPERVISOR. 3. Run the PCONSOLE utility from your PC workstation. 4.
CHAPTER 6 NOVELL NETWARE PRINTING The following steps apply to configuring a remote printer on NetWare 3.xx systems: 6. a. b. c. d. e. f. g. h. i. Select Print Server Information from the PCONSOLE main menu and choose the name of the PSERVER NLM. Select Print Server Configuration and then Printer Configuration. Select any "Not Installed" printer and press Enter. Remember the number of this printer, since it will be used later in the configuration process. If desired, type in a new name for the printer.
CHAPTER 6 NOVELL NETWARE PRINTING Assigning the Remote printer name and number using BRCONFIG 7. a. b. Execute the BRCONFIG from the Windows menu or insert the Brother Print Server Software diskette in Drive A: of your PC and type: A:BRCONFIG Select the Brother print server from the list of print servers.
CHAPTER 6 NOVELL NETWARE PRINTING Other Sources of Information 1. Visit http://solutions.brother.com/ for more information on network printing. 2. Refer to chapter 10 of this user guide to learn how to configure the IP address of the printer.
CHAPTER 7 APPLETALK (ETHERTALK) TCP/IP PRINTING CHAPTER SEVEN 7 AppleTalk (EtherTalk) TCP/IP Printing Printing From a Macintosh 71 Overview Brother Print Server's support the AppleTalk protocol running over Ethernet (also known as EtherTalk). This allows Macintosh users to print at the same time as all other Ethernet network using the AppleTalk (also referred to as EtherTalk) protocol. With the release of System 8.6 or later, Apple introduced a TCP/IP printing capability.
CHAPTER 7 APPLETALK (ETHERTALK) TCP/IP PRINTING Macintosh Configuration Your Brother Printer is compatible with the standard Apple LaserWriter 8 printer driver (earlier versions of the LaserWriter drivers may crash or cause PostScript errors on large networks). If you do not have the LaserWriter 8 driver you must install them. Consult your Macintosh documentation for instructions on how to do this.
CHAPTER 7 APPLETALK (ETHERTALK) TCP/IP PRINTING Operation Once the print server is installed and the printer is powered on, the Brother print server AppleTalk service name (default is BRN_xxxxxx_P1_AT, where "xxxxxx" is the last six digits of the Ethernet address (MAC address) should appear in the Chooser.
CHAPTER 7 APPLETALK (ETHERTALK) TCP/IP PRINTING How to Select the Print Server (TCP/IP) Apple has developed the "Desktop Printer" utility, this can be found from the Apple menu (this is only available from System 8.6 or later). When you run it you will see the following screen: Figure 3 Selecting LPR Printing 1. Select the "Printer (LPR)" option and click "OK".
CHAPTER 7 APPLETALK (ETHERTALK) TCP/IP PRINTING 2. At this point we must select the correct PPD file for the printer and also configure the correct LPR information. Click the "Change" button in the "PostScript Printer Description (PPD) File" section. Insert the CD-ROM that contains the PPD file for the printer and select the appropriate PPD file. 3. Now select the "Change" button below the "LPR Printer Selection" text. 4. You must then enter the IP address and service name of details of the printer.
CHAPTER 7 APPLETALK (ETHERTALK) TCP/IP PRINTING Changing the Configuration From a Macintosh, the easiest way to change the printer or print server parameters is to use a web browser. Simply connect to the printer using the format: http://ip_address where ip_address is the address of the printer. PC users can also use the BRAdmin application to change printer and print server details. Other Sources of Information 1. Visit http://solutions.brother.com/ for more information on network printing. 2.
CHAPTER 8 DLC PRINTING CHAPTER EIGHT 8 DLC Printing Printing from Windows NT or Windows 2000 81 Overview DLC is a simple protocol that is included in Windows NT and Windows 2000 as standard. It can be used on other operating systems (such as Windows 3.x) with the addition of vendor-supplied software that supports the Hewlett-Packard JetDirect card. Quick Tips: 1. One way to print the details of all network settings is to print a configuration page.
CHAPTER 8 DLC PRINTING Configuring DLC on Windows NT/2000 To use DLC on Windows NT, you must first install the DLC protocol. 1. Log into Windows NT with administrative privileges. Go to the NT Control Panel and double click on the Network icon. Windows 2000 users select the properties of the Local Area Connection. 2. On Windows NT 3.5x systems, select Add Software. On Windows NT 4.0 systems, click on the Protocol tab, and click Add. Windows 2000 users click the Install button from the General Tab. 3.
CHAPTER 8 DLC PRINTING Windows 2000 Printer Setup 1. Log into Windows 2000 with administrative privileges. From the Start menu, select Settings and then Printers. 2. Select Add Printer (If you have already installed a Brother printer driver, double click the printer driver that you wish to configure and then select Printers/Properties, select the Ports tab, Click on “Add Port” and continue from Step 6 (ignoring steps 11-14) about installing the correct driver). 3. Click Next. 4.
CHAPTER 8 DLC PRINTING Windows NT 4.0 Printer Setup Log into Windows NT with administrative privileges. From the Start menu, select Settings and then Printers. 1. Select Add Printer (If you have already installed a Brother printer driver, double click the printer driver that you wish to configure and then select Printers/Properties, select the Ports tab and continue from Step 4 (ignoring steps 9-11) about installing the correct driver). 2. Select My Computer and then click Next. 3. Select Add a Port. 4.
CHAPTER 8 DLC PRINTING Windows NT 3.5x Setup 1. 2. 3. 4. 5. 6. 7. From the Windows NT Main group, double click on the Print Manager icon. Select Printer from the menu bar and click on Create Printer. Enter any desired name for the printer in the Printer Name box. Select the printer model in the Driver menu. Choose Other (or Network Printer for V3.1 systems) from the Print to menu. Click on Hewlett-Packard Network Port.
CHAPTER 8 DLC PRINTING Other Sources of Information 1. Visit http://solutions.brother.com/ for more information on network printing.
CHAPTER 9 WEB BASED MANAGEMENTR CHAPTER NINE 9 Web Based Management How to use a Web Browser to manage your Device 91 Overview A standard World Wide Web Browser (we recommend Netscape Navigator version 4.0 or later/Microsoft Internet Explorer version 4.0 or later) can be used to manage your printer using the HTTP (Hyper Text Transfer Protocol). You can get the following information from the printer using a web browser. 1. 2. 3. 4.
CHAPTER 9 WEB BASED MANAGEMENTR How to connect to your printer using a Browser Type "http://printers IP Address /" into your browser (you can also use the NetBIOS name of the print server, if you are in Microsoft Windows domain/Workgroup environment). Enter the DNS name of the printer if connecting to a network that uses the DNS protocol. Other Sources of Information 1. Visit http://solutions.brother.com/ for more information on network printing. 2.
CHAPTER 10 TCP/IP CONFIGURATION CHAPTER TEN 10 TCP/IP Configuration 101 Assigning TCP/IP Information Overview The TCP/IP protocol requires that each device on the network have it's own unique IP address. Use the following information to learn about IP address configuration. By default Brother print servers have a sample IP address of 192.0.0.192, however, you can easily change this IP address number to match with the IP address details of your network. This can be done in any of the following ways: 1.
CHAPTER 10 TCP/IP CONFIGURATION Other ways to CHANGE the IP address once it is already set: 1. 2. 3. 4. Printer front panel TELNET HTTP (Web browser) Other SNMP based management utility These configuration methods are described in the following paragraphs. The IP address you assign to the print server must be on the same logical network as your host computers, if it is not, you must properly configure the subnet mask and the router (gateway).
CHAPTER 10 TCP/IP CONFIGURATION Changing the IP Address using the BRAdmin application Start the BRAdmin application (from Windows 95/98/Me, NT4.0, Windows 2000). The BRAdmin application can use the IPX/SPX or TCP/IP protocols to communicate with the Brother print server. As the default IP address of Brother print servers is 192.0.0.192, the print server will probably be incompatible with the IP address numbering scheme on your network.
CHAPTER 10 TCP/IP CONFIGURATION Using BRAdmin and the IPX/SPX Protocol to change the IP address If your PC has Novell Netware Client software and is using the IPX/SPX protocol, do the following: 1. Select IPX/SPX filter in the left frame of the main window. 2. Check the print server name (the default node name will be BRN_xxxxxx, where "xxxxxx" is the last six digits of the Ethernet address (MAC address)) NC-2000 series print servers have a default name of BRO_xxxxxx..
CHAPTER 10 TCP/IP CONFIGURATION Using DHCP to Configure the IP address Dynamic Host Configuration Protocol (DHCP) is one of several automated mechanisms for IP address allocation. If you have DHCP Server in your network (typically a Unix, Windows NT/2000 or Novell Netware network) the print server will automatically obtains its IP address from DHCP server and register its name with any RFC 1001 and 1002-compliant dynamic name services.
CHAPTER 10 TCP/IP CONFIGURATION Using ARP to Configure the Print Server IP Address If you are unable to use the Bradmin application, printer front panel and your network does not use a DHCP server, you can also use the ARP command. ARP is the simplest method of configuring the print server IP address. The ARP command is available on Windows systems that have TCP/IP installed as well as Unix systems.
CHAPTER 10 TCP/IP CONFIGURATION Using RARP to Configure the IP Address Brother print server IP address can be configured using the Reverse ARP (rarp) facility on your host computer.
CHAPTER 10 TCP/IP CONFIGURATION Using BOOTP to Configure the IP Address BOOTP is an alternative to rarp that has the advantage of allowing configuration of the subnet mask and gateway. In order to use BOOTP to configure the IP address make sure that BOOTP is installed and running on your host computer (it should appear in the /etc/services file on your host as a real service; type man bootpd or refer to your system documentation for information). BOOTP is usually started up via the /etc/inetd.
CHAPTER 10 TCP/IP CONFIGURATION Configuring the IP Address with DEC NCP or BRCONFIG Users of DEC and Novell networks have additional alternatives for configuring the IP address of Brother print servers by using the remote console facility. On VMS systems, you will need to have DECNET running in order to use the remote console.
CHAPTER 10 TCP/IP CONFIGURATION On a NetWare networks, you can use the BRCONFIG utility which are included with every print server. If you are using the remote console, you will get the message Console connected (VMS) or Connection established (BRCONFIG) or Remote console reserved (ULTRIX). Press RETURN and enter the default password "access" in response to the "#" prompt (it will not echo). You will be prompted for a user name. Enter anything in response to this prompt.
CHAPTER 10 TCP/IP CONFIGURATION Changing the IP Address settings with the TELNET Console You can also use the TELNET command to change the IP address. Using TELNET is effective way, when you change the IP address. But a valid IP address must already be programmed into the print server. If you are using the TELNET, you will be expected to enter the password of the print server. Press RETURN and enter the default password of "access" in response to the "#" prompt (it will not echo).
CHAPTER 10 TCP/IP CONFIGURATION Other Sources of Information Visit http://solutions.brother.com/ for more information on network printing.
CHAPTER 11 TROUBLESHOOTING CHAPTER ELEVEN 11 11 Troubleshooting Overview This chapter describes procedures for troubleshooting problems you may encounter with a Brother Print Server, it is divided into the following sections: 1. Installation Problems 2. Intermittent Problems 3.
CHAPTER 11 TROUBLESHOOTING Installation problems If you cannot print over the network, check the following: 1. Make sure that the printer is powered on, is on-line and ready to print. Verify that the printer and the configuration are good by printing the configuration page. Refer to the Quick Setup Guide for information on how to print the configuration page on your print server. If the test fails, check: a.
CHAPTER 11 TROUBLESHOOTING a. If you are using TCP/IP: Try pinging the print server from the host operating system command prompt with the command: ping ipaddress Where ipaddress is the print server IP address (note that in some instances it can take up to two minutes for the print server load its IP address (after setting the IP address).
CHAPTER 11 TROUBLESHOOTING 3. If you cannot make any of the connections in step 2, check the following: a. Make sure the printer is powered on and on-line. b. Verify that the cabling, network connection, and print out a configuration page in the Network STATISTICS information to see if bytes are being transmitted and received. c. Check to see if there is any LED activity. The NC-3000/4000 series print servers have three LEDs. These can be used to diagnose problems.
CHAPTER 11 TROUBLESHOOTING Intermittent Problems If the print server and printer start up OK, but you intermittently have problems printing, check the following: 1. If you can print small jobs but large graphics jobs are distorted or incomplete, make sure that you have adequate memory in your printer and the latest printer driver installed on your computer. The latest Brother printer drivers can be downloaded from http://solutions.brother.com. 2.
CHAPTER 11 TROUBLESHOOTING TCP/IP Troubleshooting If you are using TCP/IP and cannot print to the print server and you have checked the hardware and network as described in the previous steps, then check the following: It is always a good idea to try following in order to eliminate the possibility of setup errors. Turning off the printer and then again, Deleting and recreating the print server and creating a new print queue in order to eliminate the possibility of setup errors. 1.
CHAPTER 11 TROUBLESHOOTING UNIX Troubleshooting 1. Make sure that the /etc/printcap file (if applicable) is typed in correctly. In particular, look for missing ":" and "\" characters, because a small error anywhere in the file can have major consequences. Also check the /usr/spool directory to make sure that you have created a valid spool directory. 2.
CHAPTER 11 TROUBLESHOOTING 6. If you are having trouble printing more than one job at a time, try increasing the IP timeout using the SET IP TIMEOUT command or using BRAdmin. 7. If text or PCL jobs are run together, try setting the service (remote printer) with EOT set to string number 2 (E). For example: SET SERVICE BRN_xxxxxx_P1 EOT 2 NC-2000 series print servers use service names that begin with BRO_xxxxxx_P1. The above line on a NC-2010h or a NC-2100h would be SET SERVICE BRO_xxxxxx_P1 EOT 2 8.
CHAPTER 11 TROUBLESHOOTING Windows NT/LAN Server (TCP/IP) Troubleshooting If you are having trouble printing with Windows NT or LAN Server, check the following: 1. Make sure that TCP/IP and TCP/IP print service are installed and running on the Windows NT system or the LAN Server file server. 2. If you are using DHCP and you have not created a reservation for the print server, make sure that you enter the NetBIOS name of the print server in the "Name or address of server providing lpd" box.
CHAPTER 11 TROUBLESHOOTING Windows 95/98/Me Peer-to-Peer (HP JetAdmin compatible method) Troubleshooting If you are having trouble printing on a Windows 95/98/Me Peer-to-Peer network, check the following (HP JetAdmin compatible method): 1.
CHAPTER 11 TROUBLESHOOTING Brother Internet Print (TCP/IP) Troubleshooting 1. The first step in troubleshooting is to make sure that you have a valid E-mail connection on both the sending PC and the receiving print server. Try sending an E-mail message from the PC to a user at the remote site who can receive mail via the POP3 server. If this does not work, there may be an Email configuration problem on the PC, on the local E-mail server, or on the remote POP3 server.
CHAPTER 11 TROUBLESHOOTING Windows 95/98/Me/2000 FTP/IPP Troubleshooting FTP not an active protocol The FTP protocol is only activated on Brother printers that have at least 8Megabytes of printer memory. Printers that are supplied with less than 8Mbytes will automatically disable FTP protocol. If you printer does not have at least 8Mbytes of memory, upgrade the memory using a SIMM or DIMM (whichever is appropriate) the FTP protocol will then be automatically activated.
CHAPTER 11 TROUBLESHOOTING Novell NetWare Troubleshooting If you cannot print from NetWare and you have checked the hardware and network as described in the previous steps, first verify that the Brother print server is attached to the server queue by going to PCONSOLE, selecting PRINT QUEUE INFORMATION, and then CURRENTLY ATTACHED SERVERS.
CHAPTER 11 TROUBLESHOOTING AppleTalk Troubleshooting If you cannot print from an AppleTalk for Macintosh computer and you have checked the hardware and network as described in the previous steps, then check the following: 1. Make sure that you are running Phase 2 AppleTalk and that you have selected the correct network interface from the Network Control Panel on the Macintosh. 2. Make sure that the AppleTalk protocol of the print server is enabled. 3.
CHAPTER 11 TROUBLESHOOTING DLC/LLC Troubleshooting If you are having trouble printing with DLC/LLC, check the following: 1. Make sure that the DLC/LLC protocol is enabled using either BRAdmin, a web browser or TELNET. 2. Make sure that the MAC address of the Windows setting is as same as the print configuration page result. Web Browser Troubleshooting (TCP/IP) 1. If you can not connect to the print server using your web browser it may be worth checking the Proxy Settings of your browser.
APPENDIX APPENDIX A Appendix A General Information You can change the configuration of your print server using any of the following methods. • • • • • • Brother BRAdmin application for Windows 95/98/Me/NT4/2000 HTTP (using a web browser) WebJetAdmin Software TELNET (command utility) Brother BRCONFIG NetWare Utility (command utility) DEC NCP or NCL Utility BRAdmin (Recommended) The Brother BRAdmin application can use the TCP/IP or IPX/SPX protocol.
APPENDIX TELNET To connect to the print server using TELNET on UNIX, Windows NT, or most other TCP/IP systems, type: TELNET ipaddress at the command prompt of the system prompt, where ipaddress is the IP address of the print server. When you are connected, push RETURN or ENTER to get the "#" prompt, enter the password "access" (the password will not appear on the screen), and type anything in response to the Enter Username> prompt. When you see the Local> prompt, you are ready to enter commands.
APPENDIX B Appendix B Using Services General A service is a resource that can be accessed by computers that wish to print to the Brother print server.
APPENDIX C Appendix C Reloading the Print Server Firmware General The firmware on the print server is stored in flash memory. This means that you can upgrade the firmware by downloading the appropriate update file. To get the latest firmware update, access the Brother Solutions web site at http://solutions.brother.com/ Some software versions that we provide will automatically factory reset your print server parameters.
APPENDIX Reloading firmware using BRAdmin The BRAdmin application can be used to easily re-program your Brother print server. 1. Start BRAdmin. 2. Highlight the appropriate print server. Then press select the Control menu and choose Load Firmware. You can select more than one print server by pressing CTRL+
APPENDIX Reloading process The Data LED on the printer front panel will blink during the firmware file loading process and then Alarm LED will turn on and the Ready LED will blink during the programming process, and the printer will restart automatically after the programming has completed. DO NOT TURN OFF THE PRINTER DURING THESE PROCESSES.
APPENDIX Reloading using the FTP Protocol from a command prompt The FTP protocol is only activated on Brother printers that have at least 8Megabytes of printer memory. Printers that are supplied with less than 8Mbytes will automatically disable FTP protocol. If you printer does not have at least 8Mbytes of memory, upgrade the memory using a SIMM or DIMM (whichever is appropriate) the FTP protocol will then be automatically activated.
APPENDIX Reloading using the FTP Protocol from a Web Browser Please visit the Brother Solutions Web site at http://solutions.brother.com for more information on upgrading the print server using a web browser.
INDEX INDEX A HP/UX.................................................................. 1-3, 1-7 HTTP.......................................................... 9-1, 10-2, A-1 Hyper Text Transfer Protocol ......................................9-1 AIX.............................................................................. 1-3 AIX 4.0........................................................................ 1-8 AppleTalk........................................ 7-1, 7-3, 11-3, 11-14 ARP ...................
INDEX sysadmsh ....................................................................1-10 System 8.6............................................................ 7-1, 7-4 P password......................................... 1-1, 2-1, 3-1, 4-1, 5-1 Peer to Peer Printing.................................................... 3-1 Peer-to-Peer............................................................. 11-10 ping............................................................................ 11-3 POP3..................