User's Guide
Table Of Contents
- Série HL-1800 GUIDE DE L’UTILISATEUR
- Conventions typographiques
- Pour utiliser l'imprimante en toute sécurité
- TABLE DES MATIERES
- CHAPITRE 1 A PROPOS DE LˇIMPRIMANTE
- Contenu de lˇemballage
- Choix dˇun emplacement pour lˇimprimante
- Quel type de papier utiliser ?
- Type et format du papier
- Choix de la taille du papier, du type de support etc avec les réglages du pilote d imprimante
- Impression avec la cassette papier
- Impression avec le bac multi-usage
- Impression vers le volet dˇéjection face imprimée dessus (impression face imprimée dessus)
- Impression dˇenveloppes
- Impression sur étiquettes et transparents
- Impression recto-verso (impression duplex)
- Impression de livrets (Pilote PCL uniquement)
- Alimentation manuelle
- CHAPITRE 2 PILOTE ET LOGICIELS
- Pilote dˇimprimante
- Fonctionnalités du pilote dˇimprimante PCL (uniquement pour les utilisateurs de Windows)
- Fonctionnalités du pilote dˇimprimante PS (uniquement pour les utilisateurs de Windows®)
- Fonctionnalités du pilote d'imprimante PS (Mac OS® 8.6 à 9.2/Mac OS® X 10.1 uniquement)
- Logiciels pour réseau
- Installation des logiciels sous Windows
- Installation des logiciels pour ordinateurs Macintosh
- Sélection automatique d'émulation
- Sélection automatique d'interface
- Paramètres de lˇimprimante
- Pilote dˇimprimante
- CHAPITRE 3 PANNEAU DE COMMANDE
- CHAPITRE 4 OPTIONS
- CHAPITRE 5 ENTRETIEN PERIODIQUE
- CHAPITRE 6 DEPISTAGE DES PANNES
- ANNEXES
- INDEX
ANNEXES
A–29
Branchement en réseau local
Attention
Branchez cet appareil à une connexion LAN qui n’est pas exposée à des
surtensions.
Geräuschemission / Niveau de bruit (Pour l'Allemagne uniquement)
Lpa < 70 dB(A) DIN 45635-19-01-KL2
IT power system (pour la Norvège uniquement)
This product is also designed for IT power system with phase to phase
voltage 230 V.
IMPORTANT - Wiring Information (Pour le Royaume-Uni uniquement)
If the power cord supplied with this printer is not suitable for your electrical
outlet, remove the plug from the mains cord and fit an appropriate three-pin
plug. If the replacement plug is intended to take a fuse then fit a fuse with
the same rating as the original.
If a moulded plug is severed from the power cord then it should be destroyed
because a plug with cut wires is dangerous if plugged into a live socket
outlet. Do not leave it where a child might find it.
In the event of replacing the plug fuse, fit a fuse approved by ASTA to
BS1362 with the same rating as the original fuse.
Always replace the fuse cover. Never use a plug with the cover omitted.
WARNING - THIS PRINTER MUST BE EARTHED.
The wires in the mains cord are coloured in accordance with the following
code :
Green and yellow: Ground
Blue: Neutral
Brown: Live