User's Guide
Table Of Contents
- Série HL-1800 GUIDE DE L’UTILISATEUR
- Conventions typographiques
- Pour utiliser l'imprimante en toute sécurité
- TABLE DES MATIERES
- CHAPITRE 1 A PROPOS DE LˇIMPRIMANTE
- Contenu de lˇemballage
- Choix dˇun emplacement pour lˇimprimante
- Quel type de papier utiliser ?
- Type et format du papier
- Choix de la taille du papier, du type de support etc avec les réglages du pilote d imprimante
- Impression avec la cassette papier
- Impression avec le bac multi-usage
- Impression vers le volet dˇéjection face imprimée dessus (impression face imprimée dessus)
- Impression dˇenveloppes
- Impression sur étiquettes et transparents
- Impression recto-verso (impression duplex)
- Impression de livrets (Pilote PCL uniquement)
- Alimentation manuelle
- CHAPITRE 2 PILOTE ET LOGICIELS
- Pilote dˇimprimante
- Fonctionnalités du pilote dˇimprimante PCL (uniquement pour les utilisateurs de Windows)
- Fonctionnalités du pilote dˇimprimante PS (uniquement pour les utilisateurs de Windows®)
- Fonctionnalités du pilote d'imprimante PS (Mac OS® 8.6 à 9.2/Mac OS® X 10.1 uniquement)
- Logiciels pour réseau
- Installation des logiciels sous Windows
- Installation des logiciels pour ordinateurs Macintosh
- Sélection automatique d'émulation
- Sélection automatique d'interface
- Paramètres de lˇimprimante
- Pilote dˇimprimante
- CHAPITRE 3 PANNEAU DE COMMANDE
- CHAPITRE 4 OPTIONS
- CHAPITRE 5 ENTRETIEN PERIODIQUE
- CHAPITRE 6 DEPISTAGE DES PANNES
- ANNEXES
- INDEX
A–30
The colours of the wiring in the power lead of this printer may not
correspond with the markings which identify the terminals in your plug. If you
need to fit a different plug, proceed as follows.
Remove a length of the cord outer sheath, taking care not to damage the
coloured insulation of the wires inside.
Cut each of the three wires to the appropriate length. If the construction of
the plug permits, leave the green and yellow wire longer than the others so
that, in the event that the cord is pulled out of the plug, the green and yellow
wire will be the last to disconnect.
Remove a short section of the coloured insulation to expose the wires.
The wire which is coloured green and yellow must be connected to the
terminal in the plug which is marked with the letter “E” or by the earth symbol
or coloured green or green and yellow.
The wire which is coloured blue must be connected to the terminal which is
marked with the letter “N” or coloured black or blue.
The wire which is coloured brown must be connected to the terminal which
is marked with the letter “L” or coloured red or brown.
The outer sheath of the cord must be secured inside the plug. The coloured
wires should not hang out of the plug.