Operation Manual

CHAPTER 5 MAINTENANCE
5-29
5.
Clean the area where the new
Drum Cleaner is to be installed
with a cotton cloth.
Fig. 5-26
6.
Install the new Drum Cleaner into
the printer by gently placing the
brass bearings into the guides,
and then pushing the handle
down until the bearings click into
place. Ensure that the Drum
Cleaner is free to move slightly
upwards (rotating slightly around
the bearings) in the housing after
you have installed it.
Fig. 5-27
7.
Re-install the Drum Cleaner Cover, and then close the Top Cover.
8.
Plug the printer into the AC outlet.
9.
Press the
Power
button to turn on the printer.
10.
Press any of the
Menu
buttons (
+
,
–
,
Set
or
Back
) to set the printer Off
Line.
11.
Press
+
or
–
until “RESET MENU” appears.
12.
Press
Set
to proceed to the next menu level, and then press
+
or
–
until
“PARTS LIFE” appears.
13.
Press
Set
, and then press
+
until “120K KIT” appears.
14.
Press
Set
, and then press
Go
. The printer is now in the READY state.